The technote linked to is incomplete. If you're using the 1000BaseT for OSA-ICC then the CHPID must be type OSC, according to the IOCP User's Guide.
Brian Nielsen On Fri, 14 Oct 2005 12:32:35 +0200, Pohlen Mailinglist <fjpohlen- [EMAIL PROTECTED]> wrote: >Ann, > >the osa definition is identical for GBE and 1000BaseT. There is a technote >on redbook site, which summarizes the necessary parameters for the different >osa types. http://www.redbooks.ibm.com/abstracts/tips0104.html?Open > >Franz Josef Pohlen > >----- Original Message ----- >From: "Smith, Ann (ISD, IT)" <[EMAIL PROTECTED]> >To: <[email protected]> >Sent: Thursday, October 13, 2005 10:56 PM >Subject: Re: OSA-Express2 1000base-T > > >Are the gen's/config's (IOCP, TCPIP) the same for the new OSA as for the >older OSA GBE? >In other words can we have a z900 with OSA GBE for production and OSA >Express-2 1000base-T at the DR site without any changes? > >-----Original Message----- >From: VM/ESA and z/VM Discussions [mailto:[EMAIL PROTECTED] >Sent: Thursday, October 13, 2005 2:48 PM >To: [email protected] >Subject: Re: OSA-Express2 1000base-T > > >Ann, > >We have both FC3364 (LX) and FC3365 (SX) cards on our z990 IFLs. Using them >with z/VM 5.1 for VSWITCH connectivity. > >Best regards, > Mark Wheeler > 3M Company > > > > > "Smith, Ann (ISD, > IT)" > <[EMAIL PROTECTED] To > tford.com> [email protected] > Sent by: VM/ESA cc > and z/VM > Discussions Subject > <[EMAIL PROTECTED] OSA-Express2 1000base-T > .UARK.EDU> > > > 10/13/2005 01:33 > PM > > > Please respond to > VM/ESA and z/VM > Discussions > <[EMAIL PROTECTED] > .UARK.EDU> > > > > > > >Does z/VM support the new OSA-Express2 100base-T adapters? > > > > >************************************************************************* >This communication, including attachments, is >for the exclusive use of addressee and may contain proprietary, >confidential and/or privileged information. If you are not the intended >recipient, any use, copying, disclosure, dissemination or distribution is >strictly prohibited. If you are not the intended recipient, please notify >the sender immediately by return e-mail, delete this communication and >destroy all copies. >*************************************************************************
