* This is the VOP Radius mailing list * I took a look at this application. I am not sure if it will work. Let me give you this scenario:
Radius is bound to 10.0.0.1 New radius IP is 10.0.0.2 I load this software, and configure it as follows: UDP 1645 ---> 10.0.0.1 UDP 1646 ---> 10.0.0.1 Presumably, this will allow all requests with a target port of 1645 and 1646 coming into this server to be redirected to 10.0.0.1. Doesn't this sort of create a loop? What happens to packets that arrive with a destination IP that is ALREADY 10.0.0.1? Maybe I am reading too much into what it does. Lastly, since the VOPRadius control panel applet instructs NOT to change the IP address in the box on the screen, how does one officially change the IP address to which VOPRadius listens? -- Scot ----- Original Message ----- From: "Scott Wolf" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, July 24, 2004 12:08 AM Subject: [VOPRadius] Need to chanhge IP address of Secondary VOPRadius server * This is the VOP Radius mailing list * Portmapper from AnalogX will do this. Will map any tcp/udp port to a TCP/UDP port on any other IP whether remote or local. http://www.analogx.com/contents/download/network/pmapper.htm Scott Wolf - [EMAIL PROTECTED] President - Aginet http://www.aginet.com Suneel Jhangiani wrote: >* This is the VOP Radius mailing list * >You should be able to find an application that will let you redirect >connections from the OLD IP to the NEW IP, similar to functionality >introduced by NAT. I must admit I haven't seen any Windows app's that >might do this as I have always managed this with our Firewall or IDS >systems. > >--- >Never put both feet in your mouth at the same time, because then you >don't have a leg to stand on. > > >(--------------------------------) {(((((( >( Suneel Jhangiani ) /_ _ ) >( Technical Director ) ( . . ) >( Inter-Computer Technology Ltd. ) ( / ) >(----------------------------------oOOo------------oOOo----) >( 40 James Street Tel: +44 (0) 20 7486 9601 ) >( London W1U 1EU Fax: +44 (0) 7050 678 978 ) >( United Kingdom Email: [EMAIL PROTECTED] ) >( Website: http://www.inctech.com ) >(----------------------------------------------------------) > > > > >-----Original Message----- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >On Behalf Of [EMAIL PROTECTED] >Sent: 21 July 2004 19:59 >To: [EMAIL PROTECTED] >Subject: [VOPRadius] Need to chanhge IP address of Secondary VOPRadius >server > >* This is the VOP Radius mailing list * >Scot, > >I don't think you can do more than one IP. Ask Vircom but I am sure I >have >went down this path before and you can only have one IP can answer. > >I believe the IP that you setup in the console window is the IP that the >radius server binds two. > > >Tony D. Koehn >Director of Networks >Pixius Communications, LLC >316-219-8569 >Amateur: N0LVY > > > > >** >To leave this list, send an email to [EMAIL PROTECTED] >and put the word "LEAVE" in the BODY of the email. > > ** To leave this list, send an email to [EMAIL PROTECTED] and put the word "LEAVE" in the BODY of the email. ** To leave this list, send an email to [EMAIL PROTECTED] and put the word "LEAVE" in the BODY of the email.
