I just got wind from an outside source that BLP and Carrier Corporation
(part of the United Technologies group) are up to something with R&D on a
"new technology" for home and commercial heating systems. UTC C. Corp. is
currently nearing completion of their major expansion of the engineering
building- quadrupling it's size for an unspecified project.

As I work for Carrier in Australia I am currently trying to investigate this
further from my end but I have not heard anything from here to date. If any
Vorts in the US have any knowledge about this or contacts within UTC I would
appreciate the help. As per usual in the corporate world one country branch
does not necessarily communicate with their counterparts that well.


John Rudiger 
Perth   WA 
Ph:-    08 9232 7150 
Fax:-  08 9232 7155 
Opportunity awaits the prepared mind. 

-----Original Message-----
From: Frederick Sparber [mailto:[EMAIL PROTECTED]
Sent: Saturday, 27 August 2005 5:58 PM
To: [email protected]
Subject: Re: Alleviating Energy Costs 


With fossil fuel energy (Heating, Cooling & Motor Fuel) cost heading toward
$3.00/therm or $30.00/million BTU,
an insulated 5,000 -10,000 gallon (poured concrete) water storage tank
buried in the back
yard (at a safe distance from the septic tank if you have one) can store
about 4 million BTU/day off a heat
pump condensing side in the summer and dumped at night with a fan-coil unit
or a cooling tower.

A  roof-mount Solar Heat collector should be able to store a few million
BTU/day when the
heat pump condensing side is warming the house. 

Since I'm about ready to go to central air conditioning (I scrapped the
evaporative cooler ^ switched to
area refrigerated units) and doing some digging  in the
flower garden of this small (city)  back yard....   :-)

Glauber's Salt costs  about $70.00 per ton (and getting cheaper as more
Coal-Burning power plants
need to turn SO2 into dirt cheap H2SO4).

In 1986 Anhydrous H2SO4 was $5.00/ton at a Southwestern Power Plant.

The expense was in the 20 ton tanker truck transportation costs.  

1, 2 SO2 + O2 -----> 2 SO3

2,  2 SO3 +  2 H2O  ------> 2 H2SO4  (Anhydrous)

2 NaCl + H2SO4 ----->  Na2SO4 + 2 HCl

Na2SO4 + 10 H2O ----->  Na2SO4-10H2O 

Phase Change:  90  Degrees F    108 BTU/LB


http://www.eere.energy.gov/consumerinfo/factsheets/b103.html

Glauber's salt (sodium sulfate decahydrate), calcium chloride hexahydrate,
and paraffin wax are the most commonly used PCMs in solar heating systems.
Although these compounds are fairly inexpensive, the packaging and
processing necessary to get consistent and reliable performance from them is
complicated and costly.

http://chemicals.etacude.com/s/sodium_sulfate2.php

Frederick

Reply via email to