No anomalous energy was produced with black nickel.


-----Original Message-----
From: Frank Znidarsic <fznidar...@aol.com>
To: fznidarsic <fznidar...@aol.com>; vortex-l <vortex-l@eskimo.com>
Sent: Thu, Oct 5, 2017 10:51 pm
Subject: Re: from nickel plated Radiola knob to nickel plated Brillo


Here is some black nickel stuff if you want to try it.


https://www.amazon.com/Incandescent-Vintage-Removable-Industrial-Projects/dp/B018GWFRHO/ref=sr_1_21?ie=UTF8&qid=1507258197&sr=8-21&keywords=black+nickel



-----Original Message-----
From: Frank Znidarsic <fznidar...@aol.com>
To: vortex-l <vortex-l@eskimo.com>
Sent: Thu, Oct 5, 2017 7:55 pm
Subject: Re: from nickel plated Radiola knob to nickel plated Brillo


I nickel plated Brillo for 1 hr at 1/2 amp.  The result look like a person who 
was just beginning to turn gray.  Some silver wire in mostly black magnetite 
colored Brillo.  Apparently only parts of the Brillo connected to the 
electrical circuit.  I placed some of it in helium at one atm and some in 
hydrogen at one atm.  No anomalous energy as of yet.


Cold fusion is not easy


Frank Znidarsic




-----Original Message-----
From: Frank Znidarsic <fznidar...@aol.com>
To: fznidarsic <fznidar...@aol.com>; vortex-l <vortex-l@eskimo.com>
Sent: Thu, Oct 5, 2017 6:43 pm
Subject: Re: from nickel plated Radiola knob to nickel plated Brillo


I found deep pits under the rusted surface of the old radio parts.   There 
appeared to be only a little hole in the nickel.  It looked like a rusted 
chrome bumper after a mild cleaning.  Apparently iron degrades to protect 
nickel.  If there is hole in the nickel a pit in the iron will form beneath the 
hole.  This is what I found upon a deep cleaning of old radio parts.  I had to 
grind it down, with power tools, to get most of these holes out.  My new nickel 
plate is quite thick.  I will not know how it look after the next 100 years.  
The first holes took 100 years to form.


I always learn something from anything I do.  Now I am applying this knowledge 
to the art of cold fusion.  Perhaps I will learn something else.


Frank Z



-----Original Message-----
From: Frank Znidarsic <fznidar...@aol.com>
To: vortex-l <vortex-l@eskimo.com>; schallsm <schal...@atlanticbb.net>
Sent: Thu, Oct 5, 2017 6:31 pm
Subject: from nickel plated Radiola knob to nickel plated Brillo


The nickel plating I did on my Radiola knobs now looks real good.  




I had to buff it with Burasso and re-plate a second time.  As before I used a 
salt electrolyte.


http://www.angelfire.com/scifi2/zpt/temp/BeforeAfter.jpg



I was then intending to plate titanium oxide nano particles but they do not 
easily connect to a circuit without
destroying the nano quality of the particles.  These particles are used in 
sunscreen and are easy to get.


I am now trying Brillo.  Nickel plated Brillo may make a good catalyst.




Nickel plating in vinegar produced a rough black surface.  Maybe a vinigar 
plating on Brillo may
even be better.  Who knows?  I am trying them now.


Frank Z












Reply via email to