William Beaty wrote:

They somehow found a small incandescent bulb which contains hard vacuum.
Stick it on a Tesla Coil circuit so the whole bulb sits at high AC
voltage, but also the filament lights up.  And what do they observe?
Weird inexplicable forces!  But they wrongly assume that they've
discovered something totally outside of physics, when I'm pretty sure that
they've just duplicated Tesla's single-electrode x-ray generator (and used
it to change their Tesla coil into a VandeGraaff.)  AC to DC, plus fierce
x-rays too, so if I'm right, the lightbulb experiment above should make a
geiger counter go crazy.

No need for a Tesla coil to do this. Er, rather, no need for a lightning bolt generator sized deal that is probably just an attempted extension of the experimenter's manhood.

Take a pair of 12V ignition coils, these are GP Sorenson parts, available from Advance Auto Parts and such places. The can-type coils. Connect the low voltage terminals in antiparallel (i.e., - on one to + on the other, and vice versa.)

HV output can be taken now from the two HV terminals, which will be out of phase.

To drive this thing, go get a 120VAC 600W light dimmer from the hardware store. Ignore the green ground lead, its for safety. I don't do safety. Hot from 120VAC mains goes to one lead of the dimmer, the other lead goes to one side of a motor run capacitor, say, 440VAC at 30uF. (NEVER NEVER use motor start capacitors) The other end of this cap goes to one leg of the low voltage inputs of the two coils (one set of + and -). The other + and - leg goes to line neutral. Crank 'er up and you get some nice, high power sparks. Put a 60kV diode the HV terminal of each coil, one facing cathode out, the other anode out. There's your HV supply.

(If you don't have a 60kV diode, get 20 of part # R6000 from http://www.allelectronics.com Put two strings of ten in series, there you go)

Put the negative output side to the filament of a light bulb, and the positive side to an electrode somewhere near the glass of the bulb. If you jack the voltage up high enough, the negative electrode is enough...you can leave the other one alone. Most bulbs give you a nice blue/lavender glow inside from the backfill gases. Nitrogen and argon, I reckon. Maybe some other stuff, varying by the company that made them, be it the Long Duck Dong company, or their competitor, Sum Dum Fuk. All made in China anyhow.

Find a low wattage bulb, like used in refrigerators for the magic light that has helped millions of people worldwide be able to see what they're getting for that midnight snack. Tubular bulbs like used in music stand lights work well too. Buy a bunch of different kinds, from different brands. Some of them will not fluoresce in the usual way; the glass will glow green. It's interesting, but be aware, you are irradiating yourself.

I got a Geiger counter to register about 10 times background through a wooden door, about 20 feet from the running device. Closer you get, more counts. At about 6 feet from the thing, sounded like static on a TV. If you are courageous enough to stand near it for a few seconds to experiment with this, you will find you can move the green spots on the glass face of the bulb around with a magnet; they are in beams.

Another experiment I did once, which I will not explain exactly how to do, as I figure someone will kill themselves, used a five stage Marx generator driving one of these tubes. The green glow from each flash was bright enough to cast shadows. Once, I ran it too long and the filament began to glow yellow, probably from electrons being ripped out of it.

Have fun if you dare. (maniacal laughter)

--Kyle

P.S., please don't anyone write me and tell me I'm exposing myself to radiation. I already know that. I take precautions, and limit exposure time. We're all gonna die some day in any case. But if its sooner rather than later, hey; I'd rather die in the USA than the NAU.

Reply via email to