Things to consider: 1/ Probably want to make sure that the hydrogen you are being supplied is a reasonably high purity 'technical' grade. 2/ Most researchers use multi-stage vacuum pumps to achieve high vacuum, you probably want to buy a 2-stage vacuum pump such as used by HVAC technicians (you need high vacuum to evaporate and remove some of the contaminants you are trying to remove). 3/ Keep all of your valves, connectors, joints, seals, and feed-throughs away from hot areas in the test vessel. 4/ Do some reading on handling hydrogen. Hot pressurised hydrogen is dangerous - exceptionally flammable and explosive. Best to do experimenting in covered outdoors area where hydrogen can't accumulate, and use small tubes that don't permit too much flow. Keep hydrogen tank under cover and outside. 5/ Calorimetry is hard. It takes a lot of detailed effort to get good results when you are looking for small gains - and you won't be able to tell if anything is happening without it. You need a data acquisition system with at least 3 thermocouples for this work.
On 20 December 2011 06:53, Peter Brosnan <[email protected]> wrote: > Thanks Ron and Hoyt . I appreciate your help and Yes after phone calls , > Hydrogen tank $90 at 2000 psi > > Have to rent the tank and ordering Regulator as we speak > > Can buy a Vacum pump 1.5 cfm $90 or > > 6.0 cfm $150 > > Anybody understand if the 1.5 would be enough ? > > Intend to follow Phens formula first > > Anybody here experimented with what he stated ? > > > >> Date: Mon, 19 Dec 2011 22:18:38 -0700 >> From: [email protected] > >> To: [email protected] >> Subject: RE: [Vo]:Phen formula from ecatbuilder.com >> >> I think you can buy it in a pressurized tank with a regulator from gas >> suppliers. >> >> >> On Tuesday, December 20, 2011 11:53 AM +1000 Peter Brosnan >> <[email protected]> wrote: >> >> > >> > >> > Hi Guys , Pete from Australia here , I just found your site and joined >> > up . I got interested in >> > Phen as well >> > >> > Phen talks about "The chamber is pressurized with hydrogen to 2000 psi >> > and heated to 200 C " >> > >> > >> > I'm trying replicate this stuff, got some of the gear here already , the >> > rest is coming . >> > >> > >> > The Hurdle is how do I pressureize my H2 at 2000 psi . Most of the Gas >> > compressor I've seen >> > are $5000 + ( To rich for my blood ) >> > >> > >> > One guy I read adapted his frigeration compressor for 600 psi >> > >> > >> > Any ideas guys >> > >> > >> > Thanks Pete >> > >> > >> > >> > >> > __________________________________________________ >> > Date: Mon, 19 Dec 2011 23:05:44 -0200 >> > Subject: Re: [Vo]:"Private information" about Rossi was the Ampernergo >> > tests described by McKubre >> > From: [email protected] >> > To: [email protected] >> > >> > Yugo... must be serbian! (or croatian...slovenian...macedonian...) >> > >> > >> > Just kidding. :-) >> > >> > >> > No matter what, I like your skepticism. Even though, to me, it seems to >> > be a lot of evidences >> > pro-CF, it helps keeping our feet on the ground. >> > >> > >> > >> > >> > >> > >> > 2011/12/19 Mary Yugo <[email protected]> >> > >> > >> > >> > >> > >> > On Mon, Dec 19, 2011 at 2:24 PM, Giovanni Santostasi >> > <[email protected]> wrote: >> > >> > Jed, >> > I'm not sure what is the ethnic origin of Mary. >> > >> > >> > >> > Sorry, not Italian. >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> >> >>
