On 23/01/2012 6:14 PM, Jojo Jaro wrote:
>
Shaun, you are in error. I have examined your pictures and like Mary, I
do not see the significance of the goop you are referring to. BUT ...
For the sake of discussion, I accept your premise that the goop was
placed there so that Tout can be higher than it would have been.
First point, Jed was not there.
Ok so lets move forward on the assumption Rossi had placed the sensor to
generate a higher than reality Tout.
As the delta T was at best 10 deg C, a bias of 6 or 7 deg C would say
there was no excess during the power applied phase.
Then the heaters were "disconnected" and the RFG was engaged.
Here I see 2 avenues to apply power during the self sustain mode.
Via the RFG leads which could be a high DC voltage with a small AC
ripple. This would show up on a AC amp meter as a small current with the
DC supplying the secret heating.
This job could be split between the Small Blue Box (SBB) AC heater
excitation. It could also generate a DC output with a small AC ripple.
It amazes me with all the brains in that room and with the future of
LENR credibility on the line, NO ONE brought a portable digital
oscilloscope and looked at what the RFG and the SBB were ACTUALLY
generating. Digital meters are well known to under report current and
voltage from complex non sinusoidal wave shapes.
But instead of doing proper checking on what was ACTUALLY being fed into
the Ecat, they relied on Rossi.
Well they got taken for a ride.
Shaun
