Frank, thanks, I now understand your approach. I thought you were using the wire as a heating element.
On Thu, Feb 23, 2012 at 3:32 PM, <[email protected]> wrote: > The Vaseline only holds the nickel dust on the wire. If it melts, good, > then I will have made some heat. > I do not worry abut the Vaseline but a I do worry about the hydrogen. I > do the experiments in a small plastic bottle > to limit the amount hydrogen and shrapnel. I energize remotely (outside > if possible) from a range of over 20ft. > > I am attempting to produce RF energy and heat. > > I do not even attempt high pressure experiments with my personal > resources and facilities. > > > > Frank > > > -----Original Message----- > From: Chemical Engineer <[email protected]> > To: vortex-l <[email protected]> > Sent: Thu, Feb 23, 2012 11:24 am > Subject: Re: [Vo]:South Africa Fuel-Free Generator Report > > Frank, > > Vaseline melts around 167 F. Aren't you going to end up with it running > off the wire and puddling at the bottom of your tube along with a lump of > Ni powder? > > Or are you going to try real "cold fusion" and keep it below 167 F? > > "Petroleum jelly is a flammable, semi-solid mixture of hydrocarbons, > having a melting-point usually ranging from a little below to a few degrees > above 167°F (75°C)" > > On Thu, Feb 23, 2012 at 9:29 AM, <[email protected]> wrote: > >> All electrical devices depend on the motion of electrons. These motions >> are fully described by Newton's and Maxwell's formulations. >> No over-unity is possible. Cold fusion, on the other hand, depends on the >> motion >> of free nucleons. Now we are dealing with the motion of the strong >> nuclear field. Its a new ball game, not well described by anyone, and >> free energy may be possible. >> >> What I did was apply Maxwells equations to moving carriers of the >> strong nuclear force and showed, at least in my mind, >> free energy was possible. What happens is a strong long range nuclear >> magnetic force is induced. >> >> My work on that area is now complete. >> >> http://www.angelfire.com/scifi2/zpt/chapterf.html >> >> I am now doing what I consider to be my last experiment. I have a >> small copper tube, the kind that connect refrigerators to the water system >> and I am using it as a wave guide. In the tube I have placed a wire coated >> with Vaseline. In the Vaseline I have embedded micrometer meter sized >> nickel particles. The device is now soaking in hydrogen. After a week or >> so I will stimulate the device with sparks. I have a neon bulb connected >> to the end of the pipe to monitor the RF energy in the system. I will >> monitor the bulb and temperature of the device. I don't expect it to work >> because I have already built devices of similar design that did not work. >> >> That's were I am at, papers complete and last experiment in progress. >> Don't expect to hear much from me in the future. >> >> >> >> Frank Zndiarsic >> >> >> >
