I talking about the area of the openning, not the area of the circumference of
the cylinder.
Jojo
----- Original Message -----
From: David Roberson
To: vortex-l@eskimo.com
Sent: Thursday, August 30, 2012 7:19 AM
Subject: Re: [Vo]:Rossi said...
Jojo, I get 3.77 square meters of area with a quick calculation. This is the
entire surface area of the cylinder. Please check your figures and let me know
if there is an error.
This is very interesting information from Rossi as, if true, his device now
would fit nicely within a locomotive size tractor. It is time to do some
further research into this.
Dave
-----Original Message-----
From: Jojo Jaro <jth...@hotmail.com>
To: vortex-l <vortex-l@eskimo.com>
Sent: Wed, Aug 29, 2012 6:31 pm
Subject: Re: [Vo]:Rossi said...
This is incredible power density. Seems unbelievable how you can pack 1MW
output from these dimensions. If true, this is more revolutionary than we
thought.
I did some rough calculations. With diameter of the cylinder at 1.2 m, the
area is 1.13 m2. Assuming that the coolant pipes take up about 50% if this
area, and fitting remaining area with 100 reactors. Each reactor would have a
diameter of 4.2 cm. Each 4.2 cm dia. reactor would be producing 10KW.
Dave, maybe you can do some simulations on if it even is possible to remove
this much heat from such a reactor.
Another thing. Rossi says he's shocked. Does this mean that Rossi no longer
does the main development. Otherwise, How can he be shocked by something he is
developing himself? Or maybe, he is shocked by the extent of his own
imagination.
Jojo
----- Original Message -----
From: Patrick Ellul
To: vortex-l@eskimo.com
Sent: Thursday, August 30, 2012 5:45 AM
Subject: [Vo]:Rossi said...
Andrea Rossi
August 29th, 2012 at 3:05 AM
Dear Dr Joseph Fine:
You are perfectly right: in fact we are designing the new 1 MW plants, for
hot temperature, and the dimensions will be those of a cylinder with a diameter
of 1.2 m and a lencth od 0.4 m.
Is shocking, I myself are surprised, but it is so.
Warmest Regards,
A.R.
Andrea Rossi
August 29th, 2012 at 9:45 AM
Dear Franco:
Attention: the dimensions 1.2 x 0.4 is not the surface of the surface of
the reactors! Inside this drum of 1.2 x 0.4 m there are 100 reactors , each of
one having about 1 200 cm^2 of surface !
I talked of the dimensions of the external container, not of the heat
exchange surface !
Warm Regards,
A.R.
Regards,
Patrick
