Hi Peter,

In open space you suggest that these energy transfers occur often due to the 
abundance of atomic He+.  What radiation signature should we observe as a 
result of these collisions?  Have you detected line emissions from the He+ from 
interstellar clouds that seem to be more excessive than expected as a result of 
the local star light?


Also, when energy is given to the He+ ions by individual H atoms, does this lay 
the groundwork for some form of interstellar light amplification condition?  
The description leaves me with the impression that energy population inversions 
might be generated as energy is added to the He+ atoms when collisions occur.  
If this happens, we might witness much larger than expected line radiation 
being measured from distant light sources that pass through the active cloud 
regions.


Dave



-----Original Message-----
From: P.J van Noorden <[email protected]>
To: vortex-l <[email protected]>
Sent: Sun, Dec 1, 2013 7:32 am
Subject: Re: [Vo]:Re:



Hello Dave
 
Lower energy hydrino can accept energy from another hydrino which is in a 
higher fractional quantum state. So they switch the quantum state. Collision of 
atomic H with the catalyst who has first accepted (ionisation and kinetic) 
energy from atomic H and produced the lower energy hydrino can probably also 
switch energy. If this occurs depends on the timeframe between the original 
energytransfer and the second collision. If inbetween energy is lost to other 
atoms/molecules in the environment the proces is probably not reversible, bcs 
there is no match for energy transfer. 
Interesting is that energy transfer can also occur in a 3 body reaction. When 3 
atomic H atoms collide ( lower probability) 2 H atoms accept 2x 13.6 eV and the 
third H atom goes into a fractional quantum state. I think the proces will 
result in net energy release bcs at moderate temperatures the proces produces 
more and more H in a fractional quantum state. With increasing temperature the 
reaction will probably be less effective in producing lower energy hydrino.
I think the hydrino producing proces is common in nature but only if  atomic 
hydrogen present and a catalyst. On earth there is virtually no atomic H 
present, so there are only minute quantities of hydrino componds in the 
environment. In space atomic hydrogen is abundant. Collision with a catalyst 
(He+) will probably result in large quantities of H in a fractional quantum 
state. It would be not surprising that the corona of the sun is the result of 
this energy transfer.
 
Peter
 
 
  
----- Original Message ----- 
  
From:   David   Roberson 
  
To: [email protected] 
  
Sent: Sunday, December 01, 2013 9:17   AM
  
Subject: Re: [Vo]:Re:
  


  
Have you determined whether or not this is   a reversible process?  How often 
does the lower energy hydrino accept   energy from a catalyst that has not yet 
released the same amount   of energy in the form of radiation?  It is common 
for energy to be   traded in both directions according to thermodynamic laws.
  
 
  
Dave
  
  
  
-----Original   Message-----
From: P.J van Noorden <[email protected]>
To:   vortex-l <[email protected]>
Sent: Sat, Nov 30, 2013 5:46   pm
Subject: Re: [Vo]:Re:

  
  
  
Collision of atomic hydrogen with a element or   compound (called a catalyst) 
that can accept n times 27.2 eV ( 2 times the   ionistaion energy of hydrogen) 
destabilises the electron, which falls to a   lower fractional quantum level, 
thereby releasing energy. 
  
 
  
----- Original Message ----- 
  
    
From:     Axil Axil     
    
To:     vortex-l     
    
Sent:     Saturday, November 30, 2013 6:48 PM
    
Subject:     Re: [Vo]:Re:
    


    
According to Mill theory, what causes the electron/hydrino to     enter the 
fractional charge state?
    


    
On Sat, Nov 30, 2013 at 12:08 PM, P.J van Noorden     <[email protected]>  
   wrote:
    
      
      
Hello Steven,
      
 
      
There have been validation reports about the working       of the CIHT cell and 
in the month of december new validation reports will       be relased as well 
as a press release. I think the main issue is now to       prevent the 
electrodes fro degrading and to increase the surface       density
      
 
      
Peter
      
 
      
        
        
-----         Original Message ----- 
        
From:         OrionWorks - Steven Vincent         Johnson 
        
        
        
To:         [email protected] 
        
Sent:         Saturday, November 30, 2013 5:31 PM
        
Subject:         RE: [Vo]:Re:
        


        
        
Hi          P.J.
        
 
        
Thanks for         the report. I must confess I have not monitored the BLP 
website for some         time. It would be nice to discover I missed some juicy 
news.         
        
 
        
You mention         the fact that -a- 10W C1HT cell has been developed (and 
presumably         demonstrated?) within BLP's labs. Do you feel fairly 
confident that the         10W prototype actually does what BLP claims? If so, 
there must         exist a LOT of prototypes in various evolutionary stages 
focusing on out         how to get the engineering to endure high temperatures 
without         degrading. I’m assuming the C1HT chemistry is highly caustic,   
      particularly at the high temperatures needed.
        
 
        
If this is         all true I think BLP is more than capable of succeeding. But 
will they         be able to make a commercial success out of their efforts? 
Depends on         how long will it take them to get a product out on the 
shelves of Wall         Mart. One year? Ten more years? Who knows. We all know 
there are other         competitors veiling for the same slice of the pie. 
Humans are a very         clever species. When motivated, such as getting 
caught in the         aphrodisiac of making obscene piles of money, or 
something as simple as         promises of sexual favors, we monkeys can 
accomplish just about         anything. Having been blessed with thumbs does 
help. Woody Allan was         wrong in Sleeper. The thumb should be considered 
the “second         favorite organ”. (Here’s a little weekend down-time         
humor.)
        
 
        
http://www.youtube.com/watch?v=ngizj5FIcjo
        
 
        
You appear to         be taking the place of Mike Carrell when it comes to 
reporting on the         status of BLP's R&D efforts. Again, thanks for the 
report, P.J.         Hopefully, Mike is listening in. ;-)
        
 
        
Regards,
        
Steven         Vincent Johnson
        
svjart.OrionWorks.com
        
www.zazzle.com/orionworks
        
tech.groups.yahoo.com/group/newvortex/
        
 
        
 
        
        
        
From: P.J van         Noorden [mailto:[email protected]]         
Sent: Saturday, November 30, 2013 6:35 AM
To: [email protected]
Subject:         Re: [Vo]:Re:

        
 
        
        
Hello         James,
        
        
 
        
        
According to         BLP the material cost of a CIHT cell of 1kW will cost only 
        $100.
        
        
There are no         expensive materials needed.
        
        
 
        
        
Peter
        
        
 
        
        
 
        
        
 
        
        
----- Original Message -----         
        
          
          
From: James           Bowery 
          
          
To: vortex-l           
          
          
Sent: Saturday,           November 30, 2013 8:44 AM
          
          
Subject: Re:           [Vo]:Re:
          
          
 
          
          
How much does a 10W cell cost in quantity           one?
          
          
 
          
          
On Sat, Nov 30, 2013 at 12:36 AM, P.J van Noorden           
<[email protected]>           wrote:
          
Hello           Steven

Blacklightpower has made a 10W CIHT cell which can           produce 
electricity from watervapour.
The composition of the           electrode is such that the hydrino producing 
reaction is facilitated           and the electronshifts caused by transition 
of the electrons to sub           groundstate levels can be used externally 
like in a battery. These           cells work at high temperature ( few hundred 
dgrC ) so they must be           well insulated. By using a very good 
insulation the cell should stay           hot, bcs the reaction will also 
produce heat. The focus of BLP lies in           the construction of an 
electrode that can function at such a high           temperature for a very 
long time without degradation and to scaleup           the powerdensity of the 
reaction in order to make the cell more           compact. To build a system of 
1000W would then be relatively simple by           using 100 cells.

Peter v Noorden


----- Original           Message ----- From: "OrionWorks - Steven Vincent 
Johnson" <[email protected]>
To:           <[email protected]>
Sent:           Saturday, November 30, 2013 12:42 AM
Subject:           [Vo]:


          
This was recently           posted out on the Yahoo group: "Society for         
  Classical
Physics",
Dr. Mill's Yahoo group:
          
The recent FAQ under the CIHT topic mentions that           "The CIHT cell has
been scaled to 10 W, and a development           projection with the achieved
significant increase in surface power           density is a 1.5 kW electric 
module
that can be ganged accordingly           to serve larger power applications." It
also talks about the 1.5kw           pre-production prototype expected by the 
end
of 2013.

Here           we are near the end of 2013 and I have to ask, why aren't we     
      hearing
about a public demo of the 10W version? It was actually           projected for 
a
couple of years ago and is apparently working at           BLP. We keep hearing
about the scaling up, but as another poster           observed earlier, "nothing
to hang your hat on". Whither the 10W           demo?

-- Lynn
          

I'll be curious           to find out what Dr. Mills might choose to say on     
      the
matter.

I thought the web site was monitored. I was           surprised to see it get 
posted.

Regards,
Steven Vincent           Johnson
svjart.OrionWorks.com
www.zazzle.com/orionworks
tech.groups.yahoo.com/group/newvortex/
          
 
          
 










Reply via email to