On Fri, Oct 23, 2020, 08:46 sandipan c <[email protected]> wrote:
> Thank you again, Christoph.
>
> Now when I run the following command, I don't get the gromacs related
> error message. However, at the end , the message says: Configuring
> incomplete, errors occurred! Is it because some of the optional packages
> and recommended packages have not been found?
>
> cmake -Bbuilddir -DBUILD_CSGAPPS=ON -DBUILD_XTP=ON -DBUILD_OWN_GROMACS=on
> -DCMAKE_INSTALL_PREFIX=${prefix} votca
> -- The C compiler identification is GNU 5.4.0
> -- Detecting C compiler ABI info
> -- Detecting C compiler ABI info - done
> -- Check for working C compiler: /usr/bin/cc - skipped
> -- Detecting C compile features
> -- Detecting C compile features - done
> CMake Error at CMakeModules/BuildGromacs.cmake:33 (install):
> install DIRECTORY given no DESTINATION!
> Call Stack (most recent call first):
> CMakeLists.txt:95 (include)
>
>
> -- MKL: Thread Layer(Intel OpenMP) Interface(4-byte Integer)
> -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh scripts
> included with your installation of MKL. This script searches for the
> libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows) environment
> variables (missing: MKL_INCLUDE_DIR MKL_Core_LINK_LIBRARY
> MKL_Interface_LINK_LIBRARY MKL_ThreadLayer_LINK_LIBRARY)
> -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh scripts
> included with your installation of MKL. This script searches for the
> libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows) environment
> variables (missing: MKL_INCLUDE_DIR MKL_Core_STATIC_LINK_LIBRARY
> MKL_Interface_STATIC_LINK_LIBRARY MKL_ThreadLayer_STATIC_LINK_LIBRARY)
> -- Found Boost: /usr/include (found suitable version "1.58.0", minimum
> required is "1.53.0") found components: program_options filesystem system
> -- MKL: Thread Layer(Intel OpenMP) Interface(4-byte Integer)
> -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh scripts
> included with your installation of MKL. This script searches for the
> libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows) environment
> variables (missing: MKL_INCLUDE_DIR MKL_Core_LINK_LIBRARY
> MKL_Interface_LINK_LIBRARY MKL_ThreadLayer_LINK_LIBRARY)
> -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh scripts
> included with your installation of MKL. This script searches for the
> libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows) environment
> variables (missing: MKL_INCLUDE_DIR MKL_Core_STATIC_LINK_LIBRARY
> MKL_Interface_STATIC_LINK_LIBRARY MKL_ThreadLayer_STATIC_LINK_LIBRARY)
> -- Found Eigen3: /usr/lib/cmake/eigen3
> -- Found Boost: /usr/include (found suitable version "1.58.0", minimum
> required is "1.53.0") found components: program_options filesystem system
> regex
> -- Found Eigen3: /usr/lib/cmake/eigen3
> -- Found VOTCA_TOOLS:
> -- Found GMX: /usr/local/gromacs/bin/gmx
> -- Looking for C++ include algorithm
> -- Looking for C++ include algorithm - found
> -- Looking for C++ include iomanip
> -- Looking for C++ include iomanip - found
> -- Looking for C++ include numeric
> -- Looking for C++ include numeric - found
> -- Looking for C++ include cstdlib
> -- Looking for C++ include cstdlib - found
> -- Found HDF5:
> /usr/lib/x86_64-linux-gnu/hdf5/serial/libhdf5_cpp.so;/usr/lib/x86_64-linux-gnu/hdf5/serial/libhdf5.so;/usr/lib/x86_64-linux-gnu/libpthread.so;/usr/lib/x86_64-linux-gnu/libsz.so;/usr/lib/x86_64-linux-gnu/libz.so;/usr/lib/x86_64-linux-gnu/libdl.so;/usr/lib/x86_64-linux-gnu/libm.so
> (found version "1.8.16") found components: CXX
> -- Could NOT find LMP (missing: LMP_EXECUTABLE)
> -- Found VOTCA_CSG:
> -- Could NOT find OpenMP_C: Found unsuitable version "4.0", but required
> is at least "4.5" (found -fopenmp)
> -- Could NOT find OpenMP_CXX: Found unsuitable version "4.0", but required
> is at least "4.5" (found -fopenmp)
> -- Could NOT find OpenMP (missing: OpenMP_C_FOUND OpenMP_CXX_FOUND)
> (Required is at least version "4.5")
> -- Checking for module 'libxc'
> -- Found libxc, version 2.1.2
> -- Found HDF5:
> /usr/lib/x86_64-linux-gnu/hdf5/serial/libhdf5_cpp.so;/usr/lib/x86_64-linux-gnu/hdf5/serial/libhdf5.so;/usr/lib/x86_64-linux-gnu/libpthread.so;/usr/lib/x86_64-linux-gnu/libsz.so;/usr/lib/x86_64-linux-gnu/libz.so;/usr/lib/x86_64-linux-gnu/libdl.so;/usr/lib/x86_64-linux-gnu/libm.so
> (found suitable version "1.8.16", minimum required is "1.8") found
> components: CXX
> CMake Warning at xtp/CMakeLists.txt:53 (message):
> HDF5 will be used such that it is compatible with version 1.8.
>
>
> -- Found Boost: /usr/include (found suitable version "1.58.0", minimum
> required is "1.57.0") found components: program_options filesystem system
> timer chrono
> -- Found Eigen3: /usr/lib/cmake/eigen3
> -- Found VOTCA_TOOLS:
> -- Found VOTCA_CSG:
> -- Could NOT find Kokkos (missing: Kokkos_DIR)
> -- Found Python: /usr/bin/python3.5 (found suitable version "3.5.2",
> minimum required is "3") found components: Interpreter
> -- Could NOT find JUPYTER_NBCONVERT (missing: JUPYTER_EXECUTABLE)
> (Required is at least version "5.4.1")
> statusSPHINX_VERSION:0.0
> -- Could NOT find SPHINX: Found unsuitable version "0.0", but required is
> at least "2.1" (found SPHINX_EXECUTABLE-NOTFOUND)
> -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE)
> -- Could NOT find SPHINX (missing: SPHINX_EXECUTABLE)
> -- Could NOT find CLANG_FORMAT: Found unsuitable version "0.0", but
> required is at least "10" (found CLANG_FORMAT_EXECUTABLE-NOTFOUND)
> -- The following features have been enabled:
>
> * BUILD_CSGAPPS, Build extra app using csg
> * BUILD_XTP, Build xtp module
> * BUILD_OWN_GROMACS, Build an internal version of gromacs
> * BUILD_MANPAGES, Build manpages (disable for cross-compile)
> * INSTALL_RC_FILES, Install votca rc files (VOTCARC.bash etc.)
>
> -- The following OPTIONAL packages have been found:
>
> * Git
> Generated version for development version
> * TXT2TAGS
> Used to build manpages
> * UnixCommands
> Used to build manpages
> * Python (required version >= 3)
> Used to build documentation files
>
> -- The following RECOMMENDED packages have been found:
>
> * FFTW3
> Enables FFT functionality
>
> -- The following REQUIRED packages have been found:
>
> * EXPAT
> Used for XML parsing
> * Threads
> Used for thread parallelization
> * PkgConfig
> Used to detect fftw package
> Used to detect libxc package
> * HDF5 (required version >= 1.8)
> Used to read h5md data files
> Used to read/write HDF5 data files
> * Boost (required version >= 1.57.0)
> Extended C++ libraries
> * Eigen3 (required version >= 3.3.0)
> C++ vector data structures
>
> -- The following features have been disabled:
>
> * BUILD_CSG_MANUAL, Build csg-manual
> * ENABLE_TESTING, Enable unit tests
> * ENABLE_RPATH_INJECT, Inject rpath into executables
> * BUILD_OWN_LIBINT, Build an internal version of libint
> * ENABLE_REGRESSION_TESTING, Enable regression tests
> * USE_CUDA, Use CUDA for GPU acceleration
>
> -- The following OPTIONAL packages have not been found:
>
> * MKL
> Enables accelerated performance with MKL
> * Kokkos (required version >= 3.0)
> Used to Ewald solver
> * JUPYTER_NBCONVERT (required version >= 5.4.1)
> * SPHINX (required version >= 2.1)
> * Doxygen
> Needed to build API documentation
> * CLANG_FORMAT (required version >= 10)
>
> -- The following RECOMMENDED packages have not been found:
>
> * OpenMP (required version >= 4.5)
> Used for thread parallelization in xtp
>
> -- Configuring incomplete, errors occurred!
> See also
> "/media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/builddir/CMakeFiles/CMakeOutput.log".
> See also
> "/media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/builddir/CMakeFiles/CMakeError.log".
>
> ------------------------------------------------------------------------------------
> Should I ignore these messages or will I have to fix these errors? This
> installation is on a single computer and not a cluster.
> I am also attaching the CMakeOutput log, in case it is required.
>
What did you set the "prefix" variable to? Alternatively use -
DCMAKE_INSTALL_PREFIX=$HOME/votca.
>
> Thanks,
> Sandipan
>
> On Fri, Oct 23, 2020 at 6:27 PM Christoph Junghans <[email protected]>
> wrote:
>
>>
>>
>> On Fri, Oct 23, 2020 at 06:17 sandipan c <[email protected]>
>> wrote:
>>
>>> Hi Christoph,
>>>
>>> thanks for your response.
>>>
>>> I tried votca installing its own gromacs, using the following command:
>>> cmake -Bbuilddir -DBUILD_CSGAPPS=ON -DBUILD_XTP=ON -DBUILD_OWN_GMX=on
>>> -DCMAKE_INSTALL_PREFIX=${prefix} votca
>>>
>> I misspoke the option is called -DBUILD_OWN_GROMACS=on
>>
>> Christoph
>>
>>>
>>>
>>> The error still persists:
>>> cmake -Bbuilddir -DBUILD_CSGAPPS=ON -DBUILD_XTP=ON -DBUILD_OWN_GMX=on
>>> -DCMAKE_INSTALL_PREFIX=${prefix} votca
>>> -- MKL: Thread Layer(Intel OpenMP) Interface(4-byte Integer)
>>> -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh scripts
>>> included with your installation of MKL. This script searches for the
>>> libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows) environment
>>> variables (missing: MKL_INCLUDE_DIR MKL_Core_LINK_LIBRARY
>>> MKL_Interface_LINK_LIBRARY MKL_ThreadLayer_LINK_LIBRARY)
>>> -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh scripts
>>> included with your installation of MKL. This script searches for the
>>> libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows) environment
>>> variables (missing: MKL_INCLUDE_DIR MKL_Core_STATIC_LINK_LIBRARY
>>> MKL_Interface_STATIC_LINK_LIBRARY MKL_ThreadLayer_STATIC_LINK_LIBRARY)
>>> -- Found Boost: /usr/include (found suitable version "1.58.0", minimum
>>> required is "1.53.0") found components: program_options filesystem system
>>> -- MKL: Thread Layer(Intel OpenMP) Interface(4-byte Integer)
>>> -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh scripts
>>> included with your installation of MKL. This script searches for the
>>> libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows) environment
>>> variables (missing: MKL_INCLUDE_DIR MKL_Core_LINK_LIBRARY
>>> MKL_Interface_LINK_LIBRARY MKL_ThreadLayer_LINK_LIBRARY)
>>> -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh scripts
>>> included with your installation of MKL. This script searches for the
>>> libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows) environment
>>> variables (missing: MKL_INCLUDE_DIR MKL_Core_STATIC_LINK_LIBRARY
>>> MKL_Interface_STATIC_LINK_LIBRARY MKL_ThreadLayer_STATIC_LINK_LIBRARY)
>>> -- Found Eigen3: /usr/lib/cmake/eigen3
>>> -- Found Boost: /usr/include (found suitable version "1.58.0", minimum
>>> required is "1.53.0") found components: program_options filesystem system
>>> regex
>>> -- Found Eigen3: /usr/lib/cmake/eigen3
>>> -- Found VOTCA_TOOLS:
>>> CMake Error at csg/CMakeModules/FindGROMACS.cmake:58 (message):
>>> Could not find a suitable gromacs library. gmx_version is not defined
>>> in
>>> the gromacs library, that is very very strange, take a look at the
>>> error
>>> message in
>>>
>>> /media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/builddir/CMakeFiles/CMakeError.log
>>> to find out what was going wrong. This most likely means that your
>>> gromacs
>>> version is too old, we need at least gromacs 2016!
>>> Call Stack (most recent call first):
>>> CMakeLists.txt:112 (_find_package)
>>> csg/CMakeLists.txt:87 (find_package)
>>>
>>>
>>> -- Configuring incomplete, errors occurred!
>>> See also
>>> "/media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/builddir/CMakeFiles/CMakeOutput.log".
>>> See also
>>> "/media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/builddir/CMakeFiles/CMakeError.log".
>>>
>>> Could you please suggest what I am doing wrong?
>>>
>>> Thanks,
>>> Sandipan
>>>
>>> On Fri, Oct 23, 2020 at 5:20 PM Christoph Junghans <[email protected]>
>>> wrote:
>>>
>>>>
>>>>
>>>> On Fri, Oct 23, 2020, 05:15 sandipan c <[email protected]>
>>>> wrote:
>>>>
>>>>> Thanks Christoph for your response.
>>>>>
>>>>> I have successfully installed a newer version of eigen3 package. Now,
>>>>> I get the following error message regarding gromacs version being too old:
>>>>>
>>>>> -- Found Eigen3: /usr/lib/cmake/eigen3
>>>>> -- Found Boost: /usr/include (found suitable version "1.58.0", minimum
>>>>> required is "1.53.0") found components: program_options filesystem system
>>>>> regex
>>>>> -- Found Eigen3: /usr/lib/cmake/eigen3
>>>>> -- Found VOTCA_TOOLS:
>>>>> CMake Error at csg/CMakeModules/FindGROMACS.cmake:58 (message):
>>>>> Could not find a suitable gromacs library. gmx_version is not
>>>>> defined in
>>>>> the gromacs library, that is very very strange, take a look at the
>>>>> error
>>>>> message in
>>>>>
>>>>> /media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/builddir/CMakeFiles/CMakeError.log
>>>>> to find out what was going wrong. This most likely means that your
>>>>> gromacs
>>>>> version is too old, we need at least gromacs 2016!
>>>>> Call Stack (most recent call first):
>>>>> CMakeLists.txt:112 (_find_package)
>>>>> csg/CMakeLists.txt:87 (find_package)
>>>>>
>>>>>
>>>>> -- Configuring incomplete, errors occurred!
>>>>> See also
>>>>> "/media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/builddir/CMakeFiles/CMakeOutput.log".
>>>>> See also
>>>>> "/media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/builddir/CMakeFiles/CMakeError.log".
>>>>>
>>>>> ---------------------------------------------
>>>>> I have installed all the dependencies and now I have separately
>>>>> installed the latest version of gromacs (5.1.1). However, I still get this
>>>>> error.
>>>>>
>>>>> Could you please suggest ways to resolve this?
>>>>>
>>>>
>>>> Gromacs 5.1.1 is pretty old, please install gromacs-2019 instead. Or
>>>> use -DBUILD_OWN_GMX=on, have votca build it's own gromacs version.
>>>>
>>>> Christoph
>>>>
>>>>
>>>>> Thanks,
>>>>> Sandipan
>>>>>
>>>>> On Fri, Oct 16, 2020 at 12:42 AM Christoph Junghans <
>>>>> [email protected]> wrote:
>>>>>
>>>>>> On Thu, Oct 15, 2020 at 1:01 PM sandipan c <[email protected]>
>>>>>> wrote:
>>>>>> >
>>>>>> > Hi,
>>>>>> >
>>>>>> > I am trying to install VOTCA in my desktop, having Ubuntu 16.04. I
>>>>>> have installed all the dependencies. The cmake version is 3.18. But,
>>>>>> when I
>>>>>> type the command "cmake -B builddir -DBUILD_CSGAPPS=ON -DBUILD_XTP=ON
>>>>>> -DCMAKE_INSTALL_PREFIX=${prefix} votca", I get the following error:
>>>>>> >
>>>>>> --------------------------------------------------------------------------------------------------------------------------
>>>>>> > -- MKL: Thread Layer(Intel OpenMP) Interface(4-byte Integer)
>>>>>> > -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh
>>>>>> scripts included with your installation of MKL. This script searches for
>>>>>> the libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows)
>>>>>> environment variables (missing: MKL_INCLUDE_DIR MKL_Core_LINK_LIBRARY
>>>>>> MKL_Interface_LINK_LIBRARY MKL_ThreadLayer_LINK_LIBRARY)
>>>>>> > -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh
>>>>>> scripts included with your installation of MKL. This script searches for
>>>>>> the libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows)
>>>>>> environment variables (missing: MKL_INCLUDE_DIR
>>>>>> MKL_Core_STATIC_LINK_LIBRARY MKL_Interface_STATIC_LINK_LIBRARY
>>>>>> MKL_ThreadLayer_STATIC_LINK_LIBRARY)
>>>>>> > -- MKL: Thread Layer(Intel OpenMP) Interface(4-byte Integer)
>>>>>> > -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh
>>>>>> scripts included with your installation of MKL. This script searches for
>>>>>> the libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows)
>>>>>> environment variables (missing: MKL_INCLUDE_DIR MKL_Core_LINK_LIBRARY
>>>>>> MKL_Interface_LINK_LIBRARY MKL_ThreadLayer_LINK_LIBRARY)
>>>>>> > -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh
>>>>>> scripts included with your installation of MKL. This script searches for
>>>>>> the libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows)
>>>>>> environment variables (missing: MKL_INCLUDE_DIR
>>>>>> MKL_Core_STATIC_LINK_LIBRARY MKL_Interface_STATIC_LINK_LIBRARY
>>>>>> MKL_ThreadLayer_STATIC_LINK_LIBRARY)
>>>>>> > CMake Error at CMakeLists.txt:112 (_find_package):
>>>>>> > Could not find a configuration file for package "Eigen3" that is
>>>>>> compatible
>>>>>> > with requested version "3.3.0".
>>>>>> >
>>>>>> > The following configuration files were considered but not
>>>>>> accepted:
>>>>>> >
>>>>>> > /usr/lib/cmake/eigen3/Eigen3Config.cmake, version: unknown
>>>>>> >
>>>>>> > Call Stack (most recent call first):
>>>>>> > tools/CMakeLists.txt:75 (find_package)
>>>>>> >
>>>>>> >
>>>>>> > -- Configuring incomplete, errors occurred!
>>>>>> > See also
>>>>>> "/media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/builddir/CMakeFiles/CMakeOutput.log".
>>>>>> > See also
>>>>>> "/media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/builddir/CMakeFiles/CMakeError.log".
>>>>>> >
>>>>>> ----------------------------------------------------------------------
>>>>>> >
>>>>>> > Could anyone please help regarding how to solve this problem.
>>>>>> You can ignore all the MKL messages, but you will need to install a
>>>>>> newer version of the eigen3 package.
>>>>>>
>>>>>> Christoph
>>>>>> >
>>>>>> > Thanks,
>>>>>> > Sandipan
>>>>>> >
>>>>>> > --
>>>>>> > Join us on Slack: https://join.slack.com/t/votca/signup
>>>>>> > ---
>>>>>> > You received this message because you are subscribed to the Google
>>>>>> Groups "votca" group.
>>>>>> > To unsubscribe from this group and stop receiving emails from it,
>>>>>> send an email to [email protected].
>>>>>> > To view this discussion on the web visit
>>>>>> https://groups.google.com/d/msgid/votca/f4cfe23c-e9c2-40ed-b756-d158038fbbc0n%40googlegroups.com
>>>>>> .
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Christoph Junghans
>>>>>> Web: http://www.compphys.de
>>>>>>
>>>>>> --
>>>>>> Join us on Slack: https://join.slack.com/t/votca/signup
>>>>>> ---
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "votca" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>> send an email to [email protected].
>>>>>> To view this discussion on the web visit
>>>>>> https://groups.google.com/d/msgid/votca/CAHG27e769JpSOT8tDa6FdNVc6oA54ek14%2BSUYv9GTCa0hVwO-Q%40mail.gmail.com
>>>>>> .
>>>>>>
>>>>> --
>>>>> Join us on Slack: https://join.slack.com/t/votca/signup
>>>>> ---
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "votca" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an email to [email protected].
>>>>> To view this discussion on the web visit
>>>>> https://groups.google.com/d/msgid/votca/CAB-cU%3D6c%2Bwu192YSZ4Qg%2BQMuFy8ckQqUXsfn6Ua%3Db-Acr1UY1A%40mail.gmail.com
>>>>> <https://groups.google.com/d/msgid/votca/CAB-cU%3D6c%2Bwu192YSZ4Qg%2BQMuFy8ckQqUXsfn6Ua%3Db-Acr1UY1A%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>>> .
>>>>>
>>>> --
>>>> Join us on Slack: https://join.slack.com/t/votca/signup
>>>> ---
>>>> You received this message because you are subscribed to the Google
>>>> Groups "votca" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to [email protected].
>>>>
>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msgid/votca/CAHG27e4hJS5creT%3DPdbhNPkcPqB3dkx%3DYDXy3G-FuRNsCZ%3DCGg%40mail.gmail.com
>>>> <https://groups.google.com/d/msgid/votca/CAHG27e4hJS5creT%3DPdbhNPkcPqB3dkx%3DYDXy3G-FuRNsCZ%3DCGg%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>> --
>>> Join us on Slack: https://join.slack.com/t/votca/signup
>>> ---
>>> You received this message because you are subscribed to the Google
>>> Groups "votca" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to [email protected].
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/votca/CAB-cU%3D4YgFMsc_O2DF573oq3eyEPAdq8%2BXKNy%2Bg2fAiajZjnsw%40mail.gmail.com
>>> <https://groups.google.com/d/msgid/votca/CAB-cU%3D4YgFMsc_O2DF573oq3eyEPAdq8%2BXKNy%2Bg2fAiajZjnsw%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>> --
>> Christoph Junghans
>> Web: http://www.compphys.de
>>
>> --
>> Join us on Slack: https://join.slack.com/t/votca/signup
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "votca" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/votca/CAHG27e4_M%3Dkk5J1NeMAX3-nq0ZqbFeR1077Bg2mehJFf09aK0Q%40mail.gmail.com
>> <https://groups.google.com/d/msgid/votca/CAHG27e4_M%3Dkk5J1NeMAX3-nq0ZqbFeR1077Bg2mehJFf09aK0Q%40mail.gmail.com?utm_medium=email&utm_source=footer>
>> .
>>
> --
> Join us on Slack: https://join.slack.com/t/votca/signup
> ---
> You received this message because you are subscribed to the Google Groups
> "votca" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/votca/CAB-cU%3D7aUZJZPPZ3apw1fpQPd-15dhe4QRr%2BA2phnwZ_HV46mw%40mail.gmail.com
> <https://groups.google.com/d/msgid/votca/CAB-cU%3D7aUZJZPPZ3apw1fpQPd-15dhe4QRr%2BA2phnwZ_HV46mw%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
--
Join us on Slack: https://join.slack.com/t/votca/signup
---
You received this message because you are subscribed to the Google Groups
"votca" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/votca/CAHG27e7i-P7nr%3D6EE7cchmytrCRD64tmg4pFt%3DAmadpHGEu%3DeQ%40mail.gmail.com.
