Thank you so much, Christoph
I ran the prefix command again followed by running the previous
command: cmake -Bbuilddir -DBUILD_CSGAPPS=ON -DBUILD_XTP=ON
-DBUILD_OWN_GROMACS=ON -DCMAKE_INSTALL_PREFIX=${prefix} votca
Now, configuring is successful:
------------------------------------------
Configuring done
-- Generating done
-- Build files have been written to:
/media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/builddir
----------------------------------------------
However, when I run the next command: cmake --build builddir --parallel 8
I am getting the following error:
In file included from
/media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/votca/xtp/include/votca/xtp/qmpackage.h:34:0,
from
/media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/votca/xtp/src/libxtp/aobasis.cc:27:
/media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/votca/xtp/include/votca/xtp/orbreorder.h:59:13:
error: array must be initialized with a brace-enclosed initializer
};
^
/media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/votca/xtp/include/votca/xtp/orbreorder.h:59:13:
error: too many initializers for ‘std::array<long int, 25ul>’
---------------------------------------------
and at the end:
CMakeFiles/Makefile2:2573: recipe for target
'xtp/src/libxtp/CMakeFiles/votca_xtp.dir/all' failed
make[1]: *** [xtp/src/libxtp/CMakeFiles/votca_xtp.dir/all] Error 2
Makefile:148: recipe for target 'all' failed
make: *** [all] Error 2
Could you please suggest why I am getting this error message?
Thanks,
Sandipan
On Fri, Oct 23, 2020 at 10:29 PM Christoph Junghans <[email protected]>
wrote:
> On Fri, Oct 23, 2020 at 10:10 AM sandipan c <[email protected]>
> wrote:
> >
> > I have set the prefix to the directory where I intend to install VOTCA.
> >
> prefix=/media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA
> > This is not in the home directory.
> > Could that be a problem?
> Well, I am asking because the only way to get that error:
> >>> CMake Error at CMakeModules/BuildGromacs.cmake:33 (install):
> >>> install DIRECTORY given no DESTINATION!
> Is if CMAKE_INSTALL_PREFIX is empty.
>
> Can you try to add the path directly as part of the cmake call?
>
> Christoph
> >
> > On Fri, Oct 23, 2020 at 8:21 PM Christoph Junghans <[email protected]>
> wrote:
> >>
> >>
> >>
> >> On Fri, Oct 23, 2020, 08:46 sandipan c <[email protected]>
> wrote:
> >>>
> >>> Thank you again, Christoph.
> >>>
> >>> Now when I run the following command, I don't get the gromacs related
> error message. However, at the end , the message says: Configuring
> incomplete, errors occurred! Is it because some of the optional packages
> and recommended packages have not been found?
> >>>
> >>> cmake -Bbuilddir -DBUILD_CSGAPPS=ON -DBUILD_XTP=ON
> -DBUILD_OWN_GROMACS=on -DCMAKE_INSTALL_PREFIX=${prefix} votca
> >>> -- The C compiler identification is GNU 5.4.0
> >>> -- Detecting C compiler ABI info
> >>> -- Detecting C compiler ABI info - done
> >>> -- Check for working C compiler: /usr/bin/cc - skipped
> >>> -- Detecting C compile features
> >>> -- Detecting C compile features - done
> >>> CMake Error at CMakeModules/BuildGromacs.cmake:33 (install):
> >>> install DIRECTORY given no DESTINATION!
> >>> Call Stack (most recent call first):
> >>> CMakeLists.txt:95 (include)
> >>>
> >>>
> >>> -- MKL: Thread Layer(Intel OpenMP) Interface(4-byte Integer)
> >>> -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh
> scripts included with your installation of MKL. This script searches for
> the libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows)
> environment variables (missing: MKL_INCLUDE_DIR MKL_Core_LINK_LIBRARY
> MKL_Interface_LINK_LIBRARY MKL_ThreadLayer_LINK_LIBRARY)
> >>> -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh
> scripts included with your installation of MKL. This script searches for
> the libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows)
> environment variables (missing: MKL_INCLUDE_DIR
> MKL_Core_STATIC_LINK_LIBRARY MKL_Interface_STATIC_LINK_LIBRARY
> MKL_ThreadLayer_STATIC_LINK_LIBRARY)
> >>> -- Found Boost: /usr/include (found suitable version "1.58.0", minimum
> required is "1.53.0") found components: program_options filesystem system
> >>> -- MKL: Thread Layer(Intel OpenMP) Interface(4-byte Integer)
> >>> -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh
> scripts included with your installation of MKL. This script searches for
> the libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows)
> environment variables (missing: MKL_INCLUDE_DIR MKL_Core_LINK_LIBRARY
> MKL_Interface_LINK_LIBRARY MKL_ThreadLayer_LINK_LIBRARY)
> >>> -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh
> scripts included with your installation of MKL. This script searches for
> the libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows)
> environment variables (missing: MKL_INCLUDE_DIR
> MKL_Core_STATIC_LINK_LIBRARY MKL_Interface_STATIC_LINK_LIBRARY
> MKL_ThreadLayer_STATIC_LINK_LIBRARY)
> >>> -- Found Eigen3: /usr/lib/cmake/eigen3
> >>> -- Found Boost: /usr/include (found suitable version "1.58.0", minimum
> required is "1.53.0") found components: program_options filesystem system
> regex
> >>> -- Found Eigen3: /usr/lib/cmake/eigen3
> >>> -- Found VOTCA_TOOLS:
> >>> -- Found GMX: /usr/local/gromacs/bin/gmx
> >>> -- Looking for C++ include algorithm
> >>> -- Looking for C++ include algorithm - found
> >>> -- Looking for C++ include iomanip
> >>> -- Looking for C++ include iomanip - found
> >>> -- Looking for C++ include numeric
> >>> -- Looking for C++ include numeric - found
> >>> -- Looking for C++ include cstdlib
> >>> -- Looking for C++ include cstdlib - found
> >>> -- Found HDF5:
> /usr/lib/x86_64-linux-gnu/hdf5/serial/libhdf5_cpp.so;/usr/lib/x86_64-linux-gnu/hdf5/serial/libhdf5.so;/usr/lib/x86_64-linux-gnu/libpthread.so;/usr/lib/x86_64-linux-gnu/libsz.so;/usr/lib/x86_64-linux-gnu/libz.so;/usr/lib/x86_64-linux-gnu/libdl.so;/usr/lib/x86_64-linux-gnu/libm.so
> (found version "1.8.16") found components: CXX
> >>> -- Could NOT find LMP (missing: LMP_EXECUTABLE)
> >>> -- Found VOTCA_CSG:
> >>> -- Could NOT find OpenMP_C: Found unsuitable version "4.0", but
> required is at least "4.5" (found -fopenmp)
> >>> -- Could NOT find OpenMP_CXX: Found unsuitable version "4.0", but
> required is at least "4.5" (found -fopenmp)
> >>> -- Could NOT find OpenMP (missing: OpenMP_C_FOUND OpenMP_CXX_FOUND)
> (Required is at least version "4.5")
> >>> -- Checking for module 'libxc'
> >>> -- Found libxc, version 2.1.2
> >>> -- Found HDF5:
> /usr/lib/x86_64-linux-gnu/hdf5/serial/libhdf5_cpp.so;/usr/lib/x86_64-linux-gnu/hdf5/serial/libhdf5.so;/usr/lib/x86_64-linux-gnu/libpthread.so;/usr/lib/x86_64-linux-gnu/libsz.so;/usr/lib/x86_64-linux-gnu/libz.so;/usr/lib/x86_64-linux-gnu/libdl.so;/usr/lib/x86_64-linux-gnu/libm.so
> (found suitable version "1.8.16", minimum required is "1.8") found
> components: CXX
> >>> CMake Warning at xtp/CMakeLists.txt:53 (message):
> >>> HDF5 will be used such that it is compatible with version 1.8.
> >>>
> >>>
> >>> -- Found Boost: /usr/include (found suitable version "1.58.0", minimum
> required is "1.57.0") found components: program_options filesystem system
> timer chrono
> >>> -- Found Eigen3: /usr/lib/cmake/eigen3
> >>> -- Found VOTCA_TOOLS:
> >>> -- Found VOTCA_CSG:
> >>> -- Could NOT find Kokkos (missing: Kokkos_DIR)
> >>> -- Found Python: /usr/bin/python3.5 (found suitable version "3.5.2",
> minimum required is "3") found components: Interpreter
> >>> -- Could NOT find JUPYTER_NBCONVERT (missing: JUPYTER_EXECUTABLE)
> (Required is at least version "5.4.1")
> >>> statusSPHINX_VERSION:0.0
> >>> -- Could NOT find SPHINX: Found unsuitable version "0.0", but required
> is at least "2.1" (found SPHINX_EXECUTABLE-NOTFOUND)
> >>> -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE)
> >>> -- Could NOT find SPHINX (missing: SPHINX_EXECUTABLE)
> >>> -- Could NOT find CLANG_FORMAT: Found unsuitable version "0.0", but
> required is at least "10" (found CLANG_FORMAT_EXECUTABLE-NOTFOUND)
> >>> -- The following features have been enabled:
> >>>
> >>> * BUILD_CSGAPPS, Build extra app using csg
> >>> * BUILD_XTP, Build xtp module
> >>> * BUILD_OWN_GROMACS, Build an internal version of gromacs
> >>> * BUILD_MANPAGES, Build manpages (disable for cross-compile)
> >>> * INSTALL_RC_FILES, Install votca rc files (VOTCARC.bash etc.)
> >>>
> >>> -- The following OPTIONAL packages have been found:
> >>>
> >>> * Git
> >>> Generated version for development version
> >>> * TXT2TAGS
> >>> Used to build manpages
> >>> * UnixCommands
> >>> Used to build manpages
> >>> * Python (required version >= 3)
> >>> Used to build documentation files
> >>>
> >>> -- The following RECOMMENDED packages have been found:
> >>>
> >>> * FFTW3
> >>> Enables FFT functionality
> >>>
> >>> -- The following REQUIRED packages have been found:
> >>>
> >>> * EXPAT
> >>> Used for XML parsing
> >>> * Threads
> >>> Used for thread parallelization
> >>> * PkgConfig
> >>> Used to detect fftw package
> >>> Used to detect libxc package
> >>> * HDF5 (required version >= 1.8)
> >>> Used to read h5md data files
> >>> Used to read/write HDF5 data files
> >>> * Boost (required version >= 1.57.0)
> >>> Extended C++ libraries
> >>> * Eigen3 (required version >= 3.3.0)
> >>> C++ vector data structures
> >>>
> >>> -- The following features have been disabled:
> >>>
> >>> * BUILD_CSG_MANUAL, Build csg-manual
> >>> * ENABLE_TESTING, Enable unit tests
> >>> * ENABLE_RPATH_INJECT, Inject rpath into executables
> >>> * BUILD_OWN_LIBINT, Build an internal version of libint
> >>> * ENABLE_REGRESSION_TESTING, Enable regression tests
> >>> * USE_CUDA, Use CUDA for GPU acceleration
> >>>
> >>> -- The following OPTIONAL packages have not been found:
> >>>
> >>> * MKL
> >>> Enables accelerated performance with MKL
> >>> * Kokkos (required version >= 3.0)
> >>> Used to Ewald solver
> >>> * JUPYTER_NBCONVERT (required version >= 5.4.1)
> >>> * SPHINX (required version >= 2.1)
> >>> * Doxygen
> >>> Needed to build API documentation
> >>> * CLANG_FORMAT (required version >= 10)
> >>>
> >>> -- The following RECOMMENDED packages have not been found:
> >>>
> >>> * OpenMP (required version >= 4.5)
> >>> Used for thread parallelization in xtp
> >>>
> >>> -- Configuring incomplete, errors occurred!
> >>> See also
> "/media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/builddir/CMakeFiles/CMakeOutput.log".
> >>> See also
> "/media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/builddir/CMakeFiles/CMakeError.log".
> >>>
> ------------------------------------------------------------------------------------
> >>> Should I ignore these messages or will I have to fix these errors?
> This installation is on a single computer and not a cluster.
> >>> I am also attaching the CMakeOutput log, in case it is required.
> >>
> >> What did you set the "prefix" variable to? Alternatively use
> -DCMAKE_INSTALL_PREFIX=$HOME/votca.
> >>>
> >>>
> >>> Thanks,
> >>> Sandipan
> >>>
> >>> On Fri, Oct 23, 2020 at 6:27 PM Christoph Junghans <[email protected]>
> wrote:
> >>>>
> >>>>
> >>>>
> >>>> On Fri, Oct 23, 2020 at 06:17 sandipan c <[email protected]>
> wrote:
> >>>>>
> >>>>> Hi Christoph,
> >>>>>
> >>>>> thanks for your response.
> >>>>>
> >>>>> I tried votca installing its own gromacs, using the following
> command:
> >>>>> cmake -Bbuilddir -DBUILD_CSGAPPS=ON -DBUILD_XTP=ON
> -DBUILD_OWN_GMX=on -DCMAKE_INSTALL_PREFIX=${prefix} votca
> >>>>
> >>>> I misspoke the option is called -DBUILD_OWN_GROMACS=on
> >>>>
> >>>> Christoph
> >>>>>
> >>>>>
> >>>>>
> >>>>> The error still persists:
> >>>>> cmake -Bbuilddir -DBUILD_CSGAPPS=ON -DBUILD_XTP=ON
> -DBUILD_OWN_GMX=on -DCMAKE_INSTALL_PREFIX=${prefix} votca
> >>>>> -- MKL: Thread Layer(Intel OpenMP) Interface(4-byte Integer)
> >>>>> -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh
> scripts included with your installation of MKL. This script searches for
> the libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows)
> environment variables (missing: MKL_INCLUDE_DIR MKL_Core_LINK_LIBRARY
> MKL_Interface_LINK_LIBRARY MKL_ThreadLayer_LINK_LIBRARY)
> >>>>> -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh
> scripts included with your installation of MKL. This script searches for
> the libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows)
> environment variables (missing: MKL_INCLUDE_DIR
> MKL_Core_STATIC_LINK_LIBRARY MKL_Interface_STATIC_LINK_LIBRARY
> MKL_ThreadLayer_STATIC_LINK_LIBRARY)
> >>>>> -- Found Boost: /usr/include (found suitable version "1.58.0",
> minimum required is "1.53.0") found components: program_options filesystem
> system
> >>>>> -- MKL: Thread Layer(Intel OpenMP) Interface(4-byte Integer)
> >>>>> -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh
> scripts included with your installation of MKL. This script searches for
> the libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows)
> environment variables (missing: MKL_INCLUDE_DIR MKL_Core_LINK_LIBRARY
> MKL_Interface_LINK_LIBRARY MKL_ThreadLayer_LINK_LIBRARY)
> >>>>> -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh
> scripts included with your installation of MKL. This script searches for
> the libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows)
> environment variables (missing: MKL_INCLUDE_DIR
> MKL_Core_STATIC_LINK_LIBRARY MKL_Interface_STATIC_LINK_LIBRARY
> MKL_ThreadLayer_STATIC_LINK_LIBRARY)
> >>>>> -- Found Eigen3: /usr/lib/cmake/eigen3
> >>>>> -- Found Boost: /usr/include (found suitable version "1.58.0",
> minimum required is "1.53.0") found components: program_options filesystem
> system regex
> >>>>> -- Found Eigen3: /usr/lib/cmake/eigen3
> >>>>> -- Found VOTCA_TOOLS:
> >>>>> CMake Error at csg/CMakeModules/FindGROMACS.cmake:58 (message):
> >>>>> Could not find a suitable gromacs library. gmx_version is not
> defined in
> >>>>> the gromacs library, that is very very strange, take a look at the
> error
> >>>>> message in
> >>>>>
>
> /media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/builddir/CMakeFiles/CMakeError.log
> >>>>> to find out what was going wrong. This most likely means that
> your gromacs
> >>>>> version is too old, we need at least gromacs 2016!
> >>>>> Call Stack (most recent call first):
> >>>>> CMakeLists.txt:112 (_find_package)
> >>>>> csg/CMakeLists.txt:87 (find_package)
> >>>>>
> >>>>>
> >>>>> -- Configuring incomplete, errors occurred!
> >>>>> See also
> "/media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/builddir/CMakeFiles/CMakeOutput.log".
> >>>>> See also
> "/media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/builddir/CMakeFiles/CMakeError.log".
> >>>>>
> >>>>> Could you please suggest what I am doing wrong?
> >>>>>
> >>>>> Thanks,
> >>>>> Sandipan
> >>>>>
> >>>>> On Fri, Oct 23, 2020 at 5:20 PM Christoph Junghans <
> [email protected]> wrote:
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> On Fri, Oct 23, 2020, 05:15 sandipan c <[email protected]>
> wrote:
> >>>>>>>
> >>>>>>> Thanks Christoph for your response.
> >>>>>>>
> >>>>>>> I have successfully installed a newer version of eigen3 package.
> Now, I get the following error message regarding gromacs version being too
> old:
> >>>>>>>
> >>>>>>> -- Found Eigen3: /usr/lib/cmake/eigen3
> >>>>>>> -- Found Boost: /usr/include (found suitable version "1.58.0",
> minimum required is "1.53.0") found components: program_options filesystem
> system regex
> >>>>>>> -- Found Eigen3: /usr/lib/cmake/eigen3
> >>>>>>> -- Found VOTCA_TOOLS:
> >>>>>>> CMake Error at csg/CMakeModules/FindGROMACS.cmake:58 (message):
> >>>>>>> Could not find a suitable gromacs library. gmx_version is not
> defined in
> >>>>>>> the gromacs library, that is very very strange, take a look at
> the error
> >>>>>>> message in
> >>>>>>>
>
> /media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/builddir/CMakeFiles/CMakeError.log
> >>>>>>> to find out what was going wrong. This most likely means that
> your gromacs
> >>>>>>> version is too old, we need at least gromacs 2016!
> >>>>>>> Call Stack (most recent call first):
> >>>>>>> CMakeLists.txt:112 (_find_package)
> >>>>>>> csg/CMakeLists.txt:87 (find_package)
> >>>>>>>
> >>>>>>>
> >>>>>>> -- Configuring incomplete, errors occurred!
> >>>>>>> See also
> "/media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/builddir/CMakeFiles/CMakeOutput.log".
> >>>>>>> See also
> "/media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/builddir/CMakeFiles/CMakeError.log".
> >>>>>>>
> >>>>>>> ---------------------------------------------
> >>>>>>> I have installed all the dependencies and now I have separately
> installed the latest version of gromacs (5.1.1). However, I still get this
> error.
> >>>>>>>
> >>>>>>> Could you please suggest ways to resolve this?
> >>>>>>
> >>>>>>
> >>>>>> Gromacs 5.1.1 is pretty old, please install gromacs-2019 instead.
> Or use -DBUILD_OWN_GMX=on, have votca build it's own gromacs version.
> >>>>>>
> >>>>>> Christoph
> >>>>>>
> >>>>>>>
> >>>>>>> Thanks,
> >>>>>>> Sandipan
> >>>>>>>
> >>>>>>> On Fri, Oct 16, 2020 at 12:42 AM Christoph Junghans <
> [email protected]> wrote:
> >>>>>>>>
> >>>>>>>> On Thu, Oct 15, 2020 at 1:01 PM sandipan c <
> [email protected]> wrote:
> >>>>>>>> >
> >>>>>>>> > Hi,
> >>>>>>>> >
> >>>>>>>> > I am trying to install VOTCA in my desktop, having Ubuntu
> 16.04. I have installed all the dependencies. The cmake version is 3.18.
> But, when I type the command "cmake -B builddir -DBUILD_CSGAPPS=ON
> -DBUILD_XTP=ON -DCMAKE_INSTALL_PREFIX=${prefix} votca", I get the following
> error:
> >>>>>>>> >
> --------------------------------------------------------------------------------------------------------------------------
> >>>>>>>> > -- MKL: Thread Layer(Intel OpenMP) Interface(4-byte Integer)
> >>>>>>>> > -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh
> scripts included with your installation of MKL. This script searches for
> the libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows)
> environment variables (missing: MKL_INCLUDE_DIR MKL_Core_LINK_LIBRARY
> MKL_Interface_LINK_LIBRARY MKL_ThreadLayer_LINK_LIBRARY)
> >>>>>>>> > -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh
> scripts included with your installation of MKL. This script searches for
> the libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows)
> environment variables (missing: MKL_INCLUDE_DIR
> MKL_Core_STATIC_LINK_LIBRARY MKL_Interface_STATIC_LINK_LIBRARY
> MKL_ThreadLayer_STATIC_LINK_LIBRARY)
> >>>>>>>> > -- MKL: Thread Layer(Intel OpenMP) Interface(4-byte Integer)
> >>>>>>>> > -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh
> scripts included with your installation of MKL. This script searches for
> the libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows)
> environment variables (missing: MKL_INCLUDE_DIR MKL_Core_LINK_LIBRARY
> MKL_Interface_LINK_LIBRARY MKL_ThreadLayer_LINK_LIBRARY)
> >>>>>>>> > -- Could NOT find MKL: Source the compilervars.sh or mklvars.sh
> scripts included with your installation of MKL. This script searches for
> the libraries in MKLROOT, LIBRARY_PATHS(Linux), and LIB(Windows)
> environment variables (missing: MKL_INCLUDE_DIR
> MKL_Core_STATIC_LINK_LIBRARY MKL_Interface_STATIC_LINK_LIBRARY
> MKL_ThreadLayer_STATIC_LINK_LIBRARY)
> >>>>>>>> > CMake Error at CMakeLists.txt:112 (_find_package):
> >>>>>>>> > Could not find a configuration file for package "Eigen3" that
> is compatible
> >>>>>>>> > with requested version "3.3.0".
> >>>>>>>> >
> >>>>>>>> > The following configuration files were considered but not
> accepted:
> >>>>>>>> >
> >>>>>>>> > /usr/lib/cmake/eigen3/Eigen3Config.cmake, version: unknown
> >>>>>>>> >
> >>>>>>>> > Call Stack (most recent call first):
> >>>>>>>> > tools/CMakeLists.txt:75 (find_package)
> >>>>>>>> >
> >>>>>>>> >
> >>>>>>>> > -- Configuring incomplete, errors occurred!
> >>>>>>>> > See also
> "/media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/builddir/CMakeFiles/CMakeOutput.log".
> >>>>>>>> > See also
> "/media/sandipan/124a8887-6d75-4321-bb42-1c9f00e06fcc/Sandipan/VOTCA/builddir/CMakeFiles/CMakeError.log".
> >>>>>>>> >
> ----------------------------------------------------------------------
> >>>>>>>> >
> >>>>>>>> > Could anyone please help regarding how to solve this problem.
> >>>>>>>> You can ignore all the MKL messages, but you will need to install
> a
> >>>>>>>> newer version of the eigen3 package.
> >>>>>>>>
> >>>>>>>> Christoph
> >>>>>>>> >
> >>>>>>>> > Thanks,
> >>>>>>>> > Sandipan
> >>>>>>>> >
> >>>>>>>> > --
> >>>>>>>> > Join us on Slack: https://join.slack.com/t/votca/signup
> >>>>>>>> > ---
> >>>>>>>> > You received this message because you are subscribed to the
> Google Groups "votca" group.
> >>>>>>>> > To unsubscribe from this group and stop receiving emails from
> it, send an email to [email protected].
> >>>>>>>> > To view this discussion on the web visit
> https://groups.google.com/d/msgid/votca/f4cfe23c-e9c2-40ed-b756-d158038fbbc0n%40googlegroups.com
> .
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> --
> >>>>>>>> Christoph Junghans
> >>>>>>>> Web: http://www.compphys.de
> >>>>>>>>
> >>>>>>>> --
> >>>>>>>> Join us on Slack: https://join.slack.com/t/votca/signup
> >>>>>>>> ---
> >>>>>>>> You received this message because you are subscribed to the
> Google Groups "votca" group.
> >>>>>>>> To unsubscribe from this group and stop receiving emails from it,
> send an email to [email protected].
> >>>>>>>> To view this discussion on the web visit
> https://groups.google.com/d/msgid/votca/CAHG27e769JpSOT8tDa6FdNVc6oA54ek14%2BSUYv9GTCa0hVwO-Q%40mail.gmail.com
> .
> >>>>>>>
> >>>>>>> --
> >>>>>>> Join us on Slack: https://join.slack.com/t/votca/signup
> >>>>>>> ---
> >>>>>>> You received this message because you are subscribed to the Google
> Groups "votca" group.
> >>>>>>> To unsubscribe from this group and stop receiving emails from it,
> send an email to [email protected].
> >>>>>>> To view this discussion on the web visit
> https://groups.google.com/d/msgid/votca/CAB-cU%3D6c%2Bwu192YSZ4Qg%2BQMuFy8ckQqUXsfn6Ua%3Db-Acr1UY1A%40mail.gmail.com
> .
> >>>>>>
> >>>>>> --
> >>>>>> Join us on Slack: https://join.slack.com/t/votca/signup
> >>>>>> ---
> >>>>>> You received this message because you are subscribed to the Google
> Groups "votca" group.
> >>>>>> To unsubscribe from this group and stop receiving emails from it,
> send an email to [email protected].
> >>>>>>
> >>>>>> To view this discussion on the web visit
> https://groups.google.com/d/msgid/votca/CAHG27e4hJS5creT%3DPdbhNPkcPqB3dkx%3DYDXy3G-FuRNsCZ%3DCGg%40mail.gmail.com
> .
> >>>>>
> >>>>> --
> >>>>> Join us on Slack: https://join.slack.com/t/votca/signup
> >>>>> ---
> >>>>> You received this message because you are subscribed to the Google
> Groups "votca" group.
> >>>>> To unsubscribe from this group and stop receiving emails from it,
> send an email to [email protected].
> >>>>> To view this discussion on the web visit
> https://groups.google.com/d/msgid/votca/CAB-cU%3D4YgFMsc_O2DF573oq3eyEPAdq8%2BXKNy%2Bg2fAiajZjnsw%40mail.gmail.com
> .
> >>>>
> >>>> --
> >>>> Christoph Junghans
> >>>> Web: http://www.compphys.de
> >>>>
> >>>> --
> >>>> Join us on Slack: https://join.slack.com/t/votca/signup
> >>>> ---
> >>>> You received this message because you are subscribed to the Google
> Groups "votca" group.
> >>>> To unsubscribe from this group and stop receiving emails from it,
> send an email to [email protected].
> >>>> To view this discussion on the web visit
> https://groups.google.com/d/msgid/votca/CAHG27e4_M%3Dkk5J1NeMAX3-nq0ZqbFeR1077Bg2mehJFf09aK0Q%40mail.gmail.com
> .
> >>>
> >>> --
> >>> Join us on Slack: https://join.slack.com/t/votca/signup
> >>> ---
> >>> You received this message because you are subscribed to the Google
> Groups "votca" group.
> >>> To unsubscribe from this group and stop receiving emails from it, send
> an email to [email protected].
> >>> To view this discussion on the web visit
> https://groups.google.com/d/msgid/votca/CAB-cU%3D7aUZJZPPZ3apw1fpQPd-15dhe4QRr%2BA2phnwZ_HV46mw%40mail.gmail.com
> .
> >>
> >> --
> >> Join us on Slack: https://join.slack.com/t/votca/signup
> >> ---
> >> You received this message because you are subscribed to the Google
> Groups "votca" group.
> >> To unsubscribe from this group and stop receiving emails from it, send
> an email to [email protected].
> >> To view this discussion on the web visit
> https://groups.google.com/d/msgid/votca/CAHG27e7i-P7nr%3D6EE7cchmytrCRD64tmg4pFt%3DAmadpHGEu%3DeQ%40mail.gmail.com
> .
> >
> > --
> > Join us on Slack: https://join.slack.com/t/votca/signup
> > ---
> > You received this message because you are subscribed to the Google
> Groups "votca" group.
> > To unsubscribe from this group and stop receiving emails from it, send
> an email to [email protected].
> > To view this discussion on the web visit
> https://groups.google.com/d/msgid/votca/CAB-cU%3D7LBtOfAjTz_%2BXqN%3D7%3DyMBm%3DoeQE5wnVHsX7S8bnpUOPw%40mail.gmail.com
> .
>
>
>
> --
> Christoph Junghans
> Web: http://www.compphys.de
>
> --
> Join us on Slack: https://join.slack.com/t/votca/signup
> ---
> You received this message because you are subscribed to the Google Groups
> "votca" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/votca/CAHG27e46va06p_UucWAR%2B%2BAtWUcc564kz5cShbSySEtOrSqy-A%40mail.gmail.com
> .
>
--
Join us on Slack: https://join.slack.com/t/votca/signup
---
You received this message because you are subscribed to the Google Groups
"votca" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/votca/CAB-cU%3D5r3q08d%3D7OOZ%3DU980NpUG9zqDcSw1kEB25qqDFmyyjAw%40mail.gmail.com.
