Hi Joe
I have always used the included driver with the kernel.
Mike
Joe Nelson wrote:
Did you compile it yourself or get a precompiled version? If so,
where did you get it? Thanks.
On 9/9/05, *Mike O'Connor* < [EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>> wrote:
Hi Joe
I'm have a 2.6.9 with 15 vlan's active, never had any trouble with
the
2.6 kernel e100 and the e1000
Cheers
Mike
Joe Nelson wrote:
> Mike,
>
> Thanks for that tip. I was able to get the e100 working really
well on
> a 2.4 kernel but not on a 2.6. It says its supposed to support 2.6.
> Do you happen to know what kernel you were running?
>
> Thank you
>
> On 9/8/05, *Mike O'Connor* <[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>
> <mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>>> wrote:
>
> Hi Joe
>
> Umm I just went back thought my notes, the eepro100 did not
work,
> I had to
> move to the e100.
> This is the driver I have used ever since for the intel
100mb cards.
>
> Sorry
> Mike
>
>
> > I have seen that mentioned on many VLAN lists so I tried an
> Intel card
> > with the eepro100 module in the PCI slot of my Soekris
and it still
> > wouldn't work. Basically it wouldn't let me set the MTU to
> 1504. Its
> > good to hear that you've used eepro100 successfully. I
either
> have an
> > old version of the module or I'm doing something wrong in
the vlan
> > setup.
> >
> > On 9/8/05, Mike O'Connor < [EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>
> <mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>>> wrote:
> >>
> >> Joe Nelson wrote:
> >>
> >> > I've had a real tough time getting the natsemi driver
to work
> with
> >> > my VLANs. I may be wrong, but I believe that I may just
have an
> >> > outdated version. Does anyone know how recent the kernel
> module for
> >> > natsemi (ethernet on Soekris 4501 board) is? I've tried to
> get VLANs
> >> > working with other cards as well - Intel Pro 100 (eepro100
> module)
> >> > and Realtek (8139too module). Nothing seems to work. I'm
> running on
> >> > the 2.6.8 kernel. From what I've read, all the newer
drivers for
> >> > these ethernet chipsets support VLANs. Does anyone have any
> insight?
> >> > Thanks.
> >> >
> >> > --
> >> > Joe Nelson
> >> > Air Wired
> >> > http://www.airwired.net
> >> >
> >>
>
>------------------------------------------------------------------------
>
> >> >
> >> >_______________________________________________
> >> >Voyage-linux mailing list
> >> >[email protected]
<mailto:[email protected]>
<mailto:[email protected]
<mailto:[email protected]>>
> >> > http://list.voyage.hk/mailman/listinfo/voyage-linux
> >> >
> >> >
> >> Hi Joe
> >>
> >> I have not tried the natsemi driver with VLAN's but will say
> that in
> >> my experaince a large number of the ethernet drivers in the
> kernel do
> >> not support VLAN's.
> >>
> >> The only drivers drivers I have ever used successfully
are eepro100
> >> and the intel drivers e100 and e1000. For example none of
the 3com
> >> drivers that I tested worked with VLAN's.
> >>
> >> Cheers
> >> Mike
> >>
> >
> >
> >
> > --
> > Joe Nelson
> > Air Wired
> > http://www.airwired.net
>
>
>
>
>
>
> --
> Joe Nelson
> Air Wired
> http://www.airwired.net
--
Joe Nelson
Air Wired
http://www.airwired.net
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
