Dear Tse, The working version is the madwifi 20050105-1 which was included in the voyage0.1sarge version.
The voyage-0.2pre1 use the kernel-image-2.6.8-486-voyage_2.0-2 and madwifi_20050712. This combination is useless for my card. I used the downloadable version from both dists and I changed nothing on them. Toth On Wed, 21 Sep 2005, Punky Tse wrote: > Toth, > > How old is your madwifi, or which kernel or voyage version you used? Please > be more specific. > > Toth Szabolcs wrote: > > Hi ! > > > > I have an Ubiquiti Networks SuperRange2 802.11b/g 400mW High Power Atheros > > Wireless mini-pci card. I was able to set the Tx Power to 400wW width the > > old madwifi but with the new madwifi-tools I was unable to set the tx power > > above 15-20dbm. > > I tired the following but nothing changed: > > You can see that the Tx-Power hasn't gone above 15dBm however my card can > > give 27dBm. > > > > wrap2c:~# iwconfig ath0 txpower auto > > wrap2c:~# iwconfig ath0 > > ath0 IEEE 802.11b ESSID:"ajka-air" > > Mode:Master Frequency:2.412 GHz Access Point: 00:15:6D:10:00:43 > > Bit Rate:0 kb/s Tx-Power:12 dBm Sensitivity=0/3 > > Retry:off RTS thr:off Fragment thr:off > > Encryption key:off > > Power Management:off > > Link Quality=0/94 Signal level=-95 dBm Noise level=-95 dBm > > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 > > Tx excessive retries:0 Invalid misc:0 Missed beacon:0 > > > > wrap2c:~# iwconfig ath0 txpower fixed > > wrap2c:~# iwconfig ath0 > > ath0 IEEE 802.11b ESSID:"ajka-air" > > Mode:Master Frequency:2.412 GHz Access Point: 00:15:6D:10:00:43 > > Bit Rate:0 kb/s Tx-Power=12 dBm Sensitivity=0/3 > > Retry:off RTS thr:off Fragment thr:off > > Encryption key:off > > Power Management:off > > Link Quality=0/94 Signal level=-95 dBm Noise level=-95 dBm > > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 > > Tx excessive retries:0 Invalid misc:0 Missed beacon:0 > > > > wrap2c:~# iwconfig ath0 txpower 400mW > > wrap2c:~# iwconfig ath0 > > ath0 IEEE 802.11b ESSID:"ajka-air" > > Mode:Master Frequency:2.412 GHz Access Point: 00:15:6D:10:00:43 > > Bit Rate:0 kb/s Tx-Power=15 dBm Sensitivity=0/3 > > Retry:off RTS thr:off Fragment thr:off > > Encryption key:off > > Power Management:off > > Link Quality=0/94 Signal level=-95 dBm Noise level=-95 dBm > > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 > > Tx excessive retries:0 Invalid misc:0 Missed beacon:0 > > > > I use the following modules: > > ------------------------------------------------------------------ > > ath_hal: module license 'Proprietary' taints kernel. > > ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413) > > wlan: 0.8.6.0 (EXPERIMENTAL) > > ath_rate_onoe: 1.0 > > ath_pci: 0.9.6.0 (EXPERIMENTAL) > > Build date: Aug 23 2005 > > Debugging version (IEEE80211 > > ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > > ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps > > 24Mbps 36Mbps 48Mbps 54Mbps > > ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps > > ath0: H/W encryption support: WEP AES AES_CCM TKIP > > ath0: mac 5.9 phy 4.3 radio 4.6 > > ath0: Use hw queue 1 for WME_AC_BE traffic > > ath0: Use hw queue 0 for WME_AC_BK traffic > > ath0: Use hw queue 2 for WME_AC_VI traffic > > ath0: Use hw queue 3 for WME_AC_VO traffic > > ath0: Use hw queue 8 for CAB traffic > > ath0: Use hw queue 9 for beacons > > Debugging version (ATH) > > ath0: Atheros 5212: mem=0x80040000, irq=9 > > ath_pci: loaded successfully > > ================================================================================ > > > > Please help ?? > > Szabolcs Toth > > > > > > > > > > _______________________________________________ > > Voyage-linux mailing list > > [email protected] > > http://list.voyage.hk/mailman/listinfo/voyage-linux > > > -- > Regards, > Punky > P U N K N ! X . c o m > Technology + Lifestyle > (http://www.punknix.com) > > Voyage Linux > (http://www.voyage.hk/software/voyage.html) > _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
