Dear Tse,
The working version is the madwifi 20050105-1 which was included in the
voyage0.1sarge version.
The voyage-0.2pre1 use the kernel-image-2.6.8-486-voyage_2.0-2 and
madwifi_20050712. This combination is useless for my card.
I used the downloadable version from both dists and I changed nothing on
them.
Toth
On Wed, 21 Sep 2005, Punky Tse wrote:
> Toth,
>
> How old is your madwifi, or which kernel or voyage version you
used? Please be more specific.
>
> Toth Szabolcs wrote:
> > Hi !
> >
> > I have an Ubiquiti Networks SuperRange2 802.11b/g 400mW High Power
Atheros
> > Wireless mini-pci card. I was able to set the Tx Power to 400wW
width the
> > old madwifi but with the new madwifi-tools I was unable to set the
tx power above 15-20dbm.
> > I tired the following but nothing changed:
> > You can see that the Tx-Power hasn't gone above 15dBm however my
card can give 27dBm.
> >
> > wrap2c:~# iwconfig ath0 txpower auto
> > wrap2c:~# iwconfig ath0
> > ath0 IEEE 802.11b ESSID:"ajka-air"
> > Mode:Master Frequency:2.412 GHz Access Point:
00:15:6D:10:00:43
> > Bit Rate:0 kb/s Tx-Power:12 dBm Sensitivity=0/3
> > Retry:off RTS thr:off Fragment thr:off
> > Encryption key:off
> > Power Management:off
> > Link Quality=0/94 Signal level=-95 dBm Noise level=-95 dBm
> > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
> > Tx excessive retries:0 Invalid misc:0 Missed beacon:0
> >
> > wrap2c:~# iwconfig ath0 txpower fixed
> > wrap2c:~# iwconfig ath0
> > ath0 IEEE 802.11b ESSID:"ajka-air"
> > Mode:Master Frequency:2.412 GHz Access Point:
00:15:6D:10:00:43
> > Bit Rate:0 kb/s Tx-Power=12 dBm Sensitivity=0/3
> > Retry:off RTS thr:off Fragment thr:off
> > Encryption key:off
> > Power Management:off
> > Link Quality=0/94 Signal level=-95 dBm Noise level=-95 dBm
> > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
> > Tx excessive retries:0 Invalid misc:0 Missed beacon:0
> >
> > wrap2c:~# iwconfig ath0 txpower 400mW
> > wrap2c:~# iwconfig ath0
> > ath0 IEEE 802.11b ESSID:"ajka-air"
> > Mode:Master Frequency:2.412 GHz Access Point:
00:15:6D:10:00:43
> > Bit Rate:0 kb/s Tx-Power=15 dBm Sensitivity=0/3
> > Retry:off RTS thr:off Fragment thr:off
> > Encryption key:off
> > Power Management:off
> > Link Quality=0/94 Signal level=-95 dBm Noise level=-95 dBm
> > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
> > Tx excessive retries:0 Invalid misc:0 Missed beacon:0
> >
> > I use the following modules:
> > ------------------------------------------------------------------
> > ath_hal: module license 'Proprietary' taints kernel.
> > ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
> > wlan: 0.8.6.0 (EXPERIMENTAL)
> > ath_rate_onoe: 1.0
> > ath_pci: 0.9.6.0 (EXPERIMENTAL)
> > Build date: Aug 23 2005
> > Debugging version (IEEE80211
> > ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> > ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps
18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> > ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps
54Mbps
> > ath0: H/W encryption support: WEP AES AES_CCM TKIP
> > ath0: mac 5.9 phy 4.3 radio 4.6
> > ath0: Use hw queue 1 for WME_AC_BE traffic
> > ath0: Use hw queue 0 for WME_AC_BK traffic
> > ath0: Use hw queue 2 for WME_AC_VI traffic
> > ath0: Use hw queue 3 for WME_AC_VO traffic
> > ath0: Use hw queue 8 for CAB traffic
> > ath0: Use hw queue 9 for beacons
> > Debugging version (ATH)
> > ath0: Atheros 5212: mem=0x80040000, irq=9
> > ath_pci: loaded successfully
> >
================================================================================
> >
> > Please help ??
> > Szabolcs Toth
> >
> >
> >
> >
> > _______________________________________________
> > Voyage-linux mailing list
> > [email protected]
> > http://list.voyage.hk/mailman/listinfo/voyage-linux
>
>
> --
> Regards,
> Punky
> P U N K N ! X . c o m
> Technology + Lifestyle
> (http://www.punknix.com)
>
> Voyage Linux
> (http://www.voyage.hk/software/voyage.html)
>
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
