Hi, > One possible solution is: > > Two radios in your WRAP, one 5GHz for the backhaul (Master or Managed) > and one 2.4GHz for the local AP. Don't know if you have the > radios/antennas for an 11 mi 5GHz link. Another option is to look into > the new 900MHz radios for your backhaul.
That is what I want to do. I have really big dishes for the 5ghz link and a good fade margin setup. I also have a 2.4ghz card to act as the AP with a little panel antenna. What I am confused about is how to set the interfaces up. > Also, while not recommended by some, it is possible to run two 2.4GHz > radios on a single WRAP with one as backhaul and the other as AP. Be > prepared for some throughput loss and absolutely run as channels 1 & 11 > to minimize the radio interference. > > Is bridging a hard and fast requirement? Routing will give much better > control over your traffic and makes things a lot easier. I have also > found that if there is any problem in your bridge configuration you can _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
