If you can't get the grub prompt, you can try the lilo as a bootloader
and see if it works. This sometimes happens if you are running
voyage.update on a non-Debian host for installing to CF.
Regards,
Punky
Mathieu Simon wrote:
Hi Voyagers
I tried installing Voyage 0.5.2 on a 1GB CF Card for my new Alix 2c2
(tinyBIOS 0.99) It must be quite a Linux novices' error that I don't
even see GRUB booting when connected to the box by serial console.
After recognizing the cf card, booting stops. - Hardware must be ok
because I was able booting an EMBCop Image before. I wanted to switch
over to voyage for learning more about Linux firewalling myself. I
also found the article about the MFGPT Bug, but obviously thats not
the point. The install was done on a standard lenny box following the
instructions in README once formating manually and once using the
format-cf.sh script. Apart from some perl localization warnings I had
no errors during install and voyages' files seem to be on the card.Any
hints?
Thanks for any response.
Mathieu
P.S: Sorry for first inconvenient subject title and double post...
------------------------------------------------------------------------
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
--
Regards,
Punky
Voyage Solutions (http://solution.voyage.hk)
* Embedded Solutions and Systems
- Mesh Networking, Captive Portal, IP Surveillance, VoIP/PBX
- Network Engineering, Development Platform and Consultation
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
