It has been a long time not updating Voyage Linux. It is time to announce Voyage Linux 0.9.5, which upgrades to Debian "Wheezy" 7.7 with 3.14.12 kernel.

Voyage Linux Distro:
    [i386] - http://www.voyage.hk/download/voyage/voyage-0.9.5.tar.bz2
    [amd64] - 
http://www.voyage.hk/download/voyage/amd64/voyage-0.9.5_amd64.tar.bz2

Voyage Linux Live CD:
    [i386] - http://www.voyage.hk/download/ISO/voyage-0.9.5.iso
    [amd64] - http://www.voyage.hk/download/ISO/amd64/voyage-0.9.5_amd64.iso

README:
http://svn.voyage.hk/repos/voyage/branches/voyage-live/0.9.5/config/includes.chroot/README

CHANGELOG:
==========================================================
0.9.5 (11 Nov 2014)
- [kernel] linux-image-3.14.12-voyage_15.0-1 for Voyage Linux
    - [cpufreq] enable cpufreq
    - [netfilter] add xt match l2tp
    - [ata] add pata_sc1200
    - [netdev] add ath10k
    - [gpio] add gpio_fch for APU
    - [gpio] change gpio_cs5535 to loadable module
    - [snd] add usb hiface module
    - [hid] add appleir, aureal and magicmouse
    - [usb] add ch341 usb serial
    - [usb] add usb ethernet
    - [leds] add leds for APU
    - [leds] add cpu led trigger
- [kernel] linux-image-3.14.12-voyage-rt-rt9_15.0-1 for Voyage MPD
    - Enable PREEPT_RT_FULL full realtime preemption
- [general/live]
    - update to Debian 7.7
    - [general] add ath10k firmware
- [general] now split interface conf into /etc/network/interfaces.d/*.conf, for better configuration control and make provision for webgui change
    - [general] add recovery option in live kernel parameter
    - [general] MPD: correct default for ALSA devices
    - [general] mount ntfs for usbmount
    - [general] set default IP address 10.0.0.10 if no DHCP lease
    - [live] use rt kernel for MPD
    - [live] add support for realtime kernel
- [mpd] 0.17.6-1
    - new upstream release https://github.com/lintweaker/mpd-dsd
    - Yan's buffer.c.diff and mpd-0.17.x-rtopt20131118.diff
- [voyage-util] 0.14-1
    - add LEDs for APU
    - change motd version to 0.9.5
    - re-enable netdev led trigger for APU
    - load sp5100-tco module for apu
    - add sync and halt option for autoinstall.sh
    - fix bash broken issue
==========================================================

PCEngines' APU board was well tested. However, we don't have enough time and resource to test on the old ALIX boards. Hence, your feedback and report on ALIX board is very important to us.

Your support is crucial and encourages us to deliver Voyage Linux releases on regular basis in future. If you found Voyage Linux useful or have been making money from it, please express your appreciation and encourage further work on this project via donation: http://linux.voyage.hk/donation

For support or get involved in Voyage Linux, please check at:
http://linux.voyage.hk/?q=getinvolved

--
Regards,
Kim-man "Punky" Tse

* Open Source Embedded Solutions and Systems
  - Voyage Linux (http://linux.voyage.hk)
  - Voyage MPD   (http://linux.voyage.hk/voyage-mpd)
  - Voyage MuBox (http://mubox.voyage.hk)
* Voyage Store   (http://store.voyage.hk)


_______________________________________________
Voyage-linux mailing list
Voyage-linux@list.voyage.hk
http://list.voyage.hk/mailman/listinfo/voyage-linux

Reply via email to