The casestudy.com VPN website had a great setup, found that the casestudy #127 worked. I could not get the example off the shrewsoft site to work at all.
I'm using a Windows 7 box to connect to the VPN. I now have a tunnel and I can ping my server and do a successful nslookup. Netstat says it's routing fine. However, I can't mount a share drive (SMB) from the linux RHEL5 box. I can do this normally inside the network without issue. Any ideas on how to resolve this in the VPN client-side? -Thanks -Gregg CTO, Serious Integrated, Inc 480-330-3159 http://www.seriousintegrated.com<http://www.seriousintegrated.com/> From: [email protected] [mailto:[email protected]] On Behalf Of Gregg Lahti Sent: Monday, July 18, 2011 10:34 PM To: [email protected] Subject: [vpn-help] SRX5308 config? Not having any luck configuring a client with a SRX5308. Used the example for the FVS33x/FVX53x and got failure. Per a previous email thread I changed the client to ike config push on the General tab and got it to connect and get a tunnel enabled but no traffic is running through the tunnel. Anyone have an idea on how to debug this and get a reliable connection or have an example that works? -Thanks -Gregg CTO, Serious Integrated, Inc 480-330-3159 http://www.seriousintegrated.com<http://www.seriousintegrated.com/>
_______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
