Hi Gregg, Have you tried to change the MTU in Shrew?
Regards, On Thu, Jul 21, 2011 at 6:12 AM, Gregg Lahti < [email protected]> wrote: > The casestudy.com VPN website had a great setup, found that the casestudy > #127 worked. I could not get the example off the shrewsoft site to work at > all.**** > > ** ** > > I’m using a Windows 7 box to connect to the VPN. I now have a tunnel and I > can ping my server and do a successful nslookup. Netstat says it’s routing > fine. However, I can’t mount a share drive (SMB) from the linux RHEL5 box. > I can do this normally inside the network without issue.**** > > ** ** > > Any ideas on how to resolve this in the VPN client-side?**** > > ** ** > > -Thanks**** > > -Gregg**** > > ** ** > > CTO, Serious Integrated, Inc**** > > 480-330-3159**** > > http://www.seriousintegrated.com**** > > ** ** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Gregg Lahti > *Sent:* Monday, July 18, 2011 10:34 PM > *To:* [email protected] > *Subject:* [vpn-help] SRX5308 config?**** > > ** ** > > Not having any luck configuring a client with a SRX5308. Used the example > for the FVS33x/FVX53x and got failure. Per a previous email thread I > changed the client to ike config push on the General tab and got it to > connect and get a tunnel enabled but no traffic is running through the > tunnel.**** > > ** ** > > Anyone have an idea on how to debug this and get a reliable connection or > have an example that works?**** > > ** ** > > -Thanks**** > > -Gregg**** > > ** ** > > CTO, Serious Integrated, Inc**** > > 480-330-3159**** > > http://www.seriousintegrated.com**** > > ** ** > > _______________________________________________ > vpn-help mailing list > [email protected] > http://lists.shrew.net/mailman/listinfo/vpn-help > >
_______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
