Hi Shrew VPN list, I need your help with the VPN connect to a Netgear Firewall.
VPN Client Version: 2.1.7-release (Shrew VPN Client) Linux or BSD OS Version: Kubuntu 11.10 64bit (actual patched enabled) Gateway Make/Model: Netgear FVS338, Gateway OS Version: ( if known) Firmware 3.0.7-24 (newest available firmware) I have set the rp_filter to 0 sysctl.d/10-network-security.conf:net.ipv4.conf.default.rp_filter=0 sysctl.d/10-network-security.conf:net.ipv4.conf.all.rp_filter=0 like advised in: http://lists.shrew.net/pipermail/vpn-help/2008-November/000950.html After that I have made the config settings again on my WindowsXP system and the VPN connection were established and works. Then I exported the ACSII config and import it to my Linux machine (same like WinXP, dualboot) in Shrew VPN client with same problem. (stuck at Phase 1 negotiation) I have also debuged the packets where I see requests but no answer from VPN gateway (Netgear). Thanks in advance, Tilo _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
