On 10/26/2011 09:01 AM, [email protected] wrote:
again with the ike.log attachment.
Hi Shrew VPN list,
I need your help with the VPN connect to a Netgear Firewall.
VPN Client Version:
2.1.7-release (Shrew VPN Client)
Linux or BSD OS Version:
Kubuntu 11.10 64bit (actual patched enabled)
Gateway Make/Model:
Netgear FVS338,
Gateway OS Version: ( if known)
Firmware 3.0.7-24 (newest available firmware)
I have set the rp_filter to 0
sysctl.d/10-network-security.conf:net.ipv4.conf.default.rp_filter=0
sysctl.d/10-network-security.conf:net.ipv4.conf.all.rp_filter=0
like advised in:
http://lists.shrew.net/pipermail/vpn-help/2008-November/000950.html
After that I have made the config settings again on my WindowsXP system
and the VPN connection were established and works.
Then I exported the ACSII config and import it to my Linux machine (same
like WinXP, dualboot) in Shrew VPN client with same problem. (stuck at
Phase 1 negotiation)
I have also debuged the packets where I see requests but no answer from
VPN gateway (Netgear).
Hi Tilo,
We think there may be a problem with the Shrew 2.1.7 packages available
in 11.10. This thread has more detail:
http://lists.shrew.net/pipermail/vpn-help/2011-September/003988.html
http://lists.shrew.net/pipermail/vpn-help/2011-October/004033.html
http://lists.shrew.net/pipermail/vpn-help/2011-October/004049.html
This post contains instructions on how to install the Shrew 2.1.5
packages (which do work) in 11.10.
http://lists.shrew.net/pipermail/vpn-help/2011-October/004053.html
You can also try compiling the Shrew 2.2.0 beta yourself, it works also.
http://lists.shrew.net/pipermail/vpn-help/2011-October/004056.html
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
