again with the ike.log attachment. > Hi Shrew VPN list, > > I need your help with the VPN connect to a Netgear Firewall. > > VPN Client Version: > 2.1.7-release (Shrew VPN Client) > > Linux or BSD OS Version: > Kubuntu 11.10 64bit (actual patched enabled) > > Gateway Make/Model: > Netgear FVS338, > > Gateway OS Version: ( if known) > Firmware 3.0.7-24 (newest available firmware) > > I have set the rp_filter to 0 > sysctl.d/10-network-security.conf:net.ipv4.conf.default.rp_filter=0 > sysctl.d/10-network-security.conf:net.ipv4.conf.all.rp_filter=0 > like advised in: > http://lists.shrew.net/pipermail/vpn-help/2008-November/000950.html > > After that I have made the config settings again on my WindowsXP system > and the VPN connection were established and works. > Then I exported the ACSII config and import it to my Linux machine (same > like WinXP, dualboot) in Shrew VPN client with same problem. (stuck at > Phase 1 negotiation) > I have also debuged the packets where I see requests but no answer from > VPN gateway (Netgear). > > Thanks in advance, > Tilo > >
iked1.log
Description: Binary data
Description: Binary data_______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
