I had a working setup for months. This morning everything was working
fine. This afternoon I switched ISPs and can no longer access the remote
system. The Shrew VPN shows the Tunnel as enabled, but I cannot access
anything on the remote end.
As I said the only change is the ISP, Comcast, and the Modem/Router
which is now a Netgear C3000. I configured the C3000 to use the same
network addressing, so I still have 3 different networks.
Local LAN=192.168.0.x
VPN Host=192.168.2.10
Remote SERVER=192.168.1.2
Remote Network Resource = 192.168.1.0/255.255.255.0
My best guess is that it's a port issue, either not configured correctly
on the C3000 or Comcast is blocking a port that my old ISP allowed. But
the 2 ports I'm aware of the Shrew VPN using (500 & 4500) are not
blocked according to Comcast and I specifically enabled them in the C3000.
Other Info:
Win7 Pro, Shrew 2.2.2
Remote Router: Cisco RVS4000
Any suggestions? Thanks!
Marc
_______________________________________________
vpn-help mailing list
[email protected]
https://lists.shrew.net/mailman/listinfo/vpn-help
