Hi Marc, it is good with the fix ?
Regards, On Fri, Feb 27, 2015 at 8:03 PM, Jim Harle <[email protected]> wrote: > Does the Netgear C3000 gateway device have the VPN pass-through fix > installed? > http://kb.netgear.com/app/answers/detail/a_id/26099 > > > -----Original Message----- > From: vpn-help [mailto:[email protected]] On Behalf Of > Marc Cohen > Sent: Thursday, February 26, 2015 4:23 PM > To: [email protected] > Subject: [vpn-help] Change in ISP prevents connection > > I had a working setup for months. This morning everything was working > fine. This afternoon I switched ISPs and can no longer access the remote > system. The Shrew VPN shows the Tunnel as enabled, but I cannot access > anything on the remote end. > > As I said the only change is the ISP, Comcast, and the Modem/Router which > is now a Netgear C3000. I configured the C3000 to use the same network > addressing, so I still have 3 different networks. > > Local LAN=192.168.0.x > VPN Host=192.168.2.10 > Remote SERVER=192.168.1.2 > Remote Network Resource = 192.168.1.0/255.255.255.0 > > My best guess is that it's a port issue, either not configured correctly > on the C3000 or Comcast is blocking a port that my old ISP allowed. But the > 2 ports I'm aware of the Shrew VPN using (500 & 4500) are not blocked > according to Comcast and I specifically enabled them in the C3000. > > Other Info: > Win7 Pro, Shrew 2.2.2 > Remote Router: Cisco RVS4000 > > Any suggestions? Thanks! > Marc > _______________________________________________ > vpn-help mailing list > [email protected] > https://lists.shrew.net/mailman/listinfo/vpn-help > > > _______________________________________________ > vpn-help mailing list > [email protected] > https://lists.shrew.net/mailman/listinfo/vpn-help >
_______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
