Does the Netgear C3000 gateway device have the VPN pass-through fix installed? http://kb.netgear.com/app/answers/detail/a_id/26099
-----Original Message----- From: vpn-help [mailto:[email protected]] On Behalf Of Marc Cohen Sent: Thursday, February 26, 2015 4:23 PM To: [email protected] Subject: [vpn-help] Change in ISP prevents connection I had a working setup for months. This morning everything was working fine. This afternoon I switched ISPs and can no longer access the remote system. The Shrew VPN shows the Tunnel as enabled, but I cannot access anything on the remote end. As I said the only change is the ISP, Comcast, and the Modem/Router which is now a Netgear C3000. I configured the C3000 to use the same network addressing, so I still have 3 different networks. Local LAN=192.168.0.x VPN Host=192.168.2.10 Remote SERVER=192.168.1.2 Remote Network Resource = 192.168.1.0/255.255.255.0 My best guess is that it's a port issue, either not configured correctly on the C3000 or Comcast is blocking a port that my old ISP allowed. But the 2 ports I'm aware of the Shrew VPN using (500 & 4500) are not blocked according to Comcast and I specifically enabled them in the C3000. Other Info: Win7 Pro, Shrew 2.2.2 Remote Router: Cisco RVS4000 Any suggestions? Thanks! Marc _______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help _______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
