Hello, I'm trying to change our Cisco vpn clients with Shrew , as many of you know that there are some issues with Cisco's VPN client and windows 8(.1) I've already tried everything that I could find on the net but it did not solve the issue.
So back to the problem in hand , I've imported the vpn profile from cisco client in shrew , it sets up the tunnel but I can't ping any IP from the internal network(s) at our office. We are using a Cisco IOS Software, C1700 Software (C1700-ADVSECURITYK9-M), Version 12.4(6)XT2, RELEASE SOFTWARE (fc2) router as our VPN concentrator I can post the relevant parts of the IPSec configuration if needed This is the client profile for now n:version:4 n:network-ike-port:500 n:network-mtu-size:1380 s:client-auto-mode:pull s:client-iface:virtual n:client-addr-auto:1 n:network-natt-port:4500 n:network-natt-rate:15 s:network-frag-mode:disable n:network-frag-size:540 n:network-dpd-enable:1 n:network-notify-enable:1 n:client-banner-enable:1 s:ident-server-type:any s:phase1-exchange:aggressive s:phase1-cipher:auto s:phase1-hash:auto n:phase1-dhgroup:2 n:phase1-life-secs:86400 s:phase2-transform:auto s:phase2-hmac:auto n:phase2-pfsgroup:0 s:ipcomp-transform:disabled n:client-dns-used:1 n:client-dns-auto:1 n:client-dns-suffix-auto:1 n:client-splitdns-used:1 n:client-splitdns-auto:1 n:client-wins-used:1 n:client-wins-auto:1 n:phase2-life-secs:3600 n:phase2-life-kbytes:0 n:policy-nailed:0 n:policy-list-auto:1 s:network-host:x.x.x.x (Public IP of the router) s:auth-method:mutual-psk-xauth s:ident-client-type:keyid s:ident-client-data:Work b:auth-mutual-psk:xxxxxxxxxxxxxxxx (Pre Shared Key) s:client-saved-username:imicev s:network-natt-mode:enable If needed I will post the relevant parts of the router too. Any help would be greatly appreciated. Thank you!
_______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
