On Thu, May 21, 2015 at 8:27 PM, Alexandru Duzsardi < [email protected]> wrote:
> on the router or on shrew client? > > Both For Shrew, the information is available here to get log https://www.shrew.net/support/VPN_Bug_Report_Windows > i just noticed that i only posted the IOS version not the actual harware > the harware is an old Cisco 1760 router, not a pix/asa firewall > > Sent from android mobile > > Alexis La Goutte <[email protected]> wrote: > > > Hi, > > Do no forget to add vpn-help list to CC. > > There is a lot of VPN concentrator but there is a menu with Logs... need > to check logs... > > Regards, > > On Thu, May 21, 2015 at 8:05 PM, Alexandru Duzsardi < > [email protected]> wrote: > >> how do i check all of these, sorry but i'm not very familiar with cisco vpn >> configurations. >> >> I always used openvpn and/or pptp in the past. Now i'm working at a company >> and i "inhereted" the cisco vpn concentrator without any real documentation >> just the login credentials. >> >> Sent from android mobile >> >> Alexis La Goutte <[email protected]> wrote: >> >> >> Hi Alexandru, >> >> What say the log of your Cisco VPN Gateway ? >> >> When the VPN tunnel is UP, on Network Tab, there is Security >> Associations Established ? >> >> What Do you have configure on Policy Generation level ? >> >> Regards, >> >> On Thu, May 21, 2015 at 10:23 AM, Alexandru Duzsardi < >> [email protected]> wrote: >> >>> Hello, >>> >>> I’m trying to change our Cisco vpn clients with Shrew , as many of you >>> know that there are some issues with Cisco’s VPN client and windows 8(.1) >>> >>> I’ve already tried everything that I could find on the net but it did >>> not solve the issue. >>> >>> >>> >>> So back to the problem in hand , I’ve imported the vpn profile from >>> cisco client in shrew , it sets up the tunnel but I can’t ping any IP from >>> the internal network(s) at our office. >>> >>> We are using a Cisco IOS Software, C1700 Software >>> (C1700-ADVSECURITYK9-M), Version 12.4(6)XT2, RELEASE SOFTWARE (fc2) router >>> as our VPN concentrator >>> >>> I can post the relevant parts of the IPSec configuration if needed >>> >>> >>> >>> This is the client profile for now >>> >>> >>> >>> n:version:4 >>> >>> n:network-ike-port:500 >>> >>> n:network-mtu-size:1380 >>> >>> s:client-auto-mode:pull >>> >>> s:client-iface:virtual >>> >>> n:client-addr-auto:1 >>> >>> n:network-natt-port:4500 >>> >>> n:network-natt-rate:15 >>> >>> s:network-frag-mode:disable >>> >>> n:network-frag-size:540 >>> >>> n:network-dpd-enable:1 >>> >>> n:network-notify-enable:1 >>> >>> n:client-banner-enable:1 >>> >>> s:ident-server-type:any >>> >>> s:phase1-exchange:aggressive >>> >>> s:phase1-cipher:auto >>> >>> s:phase1-hash:auto >>> >>> n:phase1-dhgroup:2 >>> >>> n:phase1-life-secs:86400 >>> >>> s:phase2-transform:auto >>> >>> s:phase2-hmac:auto >>> >>> n:phase2-pfsgroup:0 >>> >>> s:ipcomp-transform:disabled >>> >>> n:client-dns-used:1 >>> >>> n:client-dns-auto:1 >>> >>> n:client-dns-suffix-auto:1 >>> >>> n:client-splitdns-used:1 >>> >>> n:client-splitdns-auto:1 >>> >>> n:client-wins-used:1 >>> >>> n:client-wins-auto:1 >>> >>> n:phase2-life-secs:3600 >>> >>> n:phase2-life-kbytes:0 >>> >>> n:policy-nailed:0 >>> >>> n:policy-list-auto:1 >>> >>> s:network-host:x.x.x.x (Public IP of the router) >>> >>> s:auth-method:mutual-psk-xauth >>> >>> s:ident-client-type:keyid >>> >>> s:ident-client-data:Work >>> >>> b:auth-mutual-psk:xxxxxxxxxxxxxxxx (Pre Shared Key) >>> >>> s:client-saved-username:imicev >>> >>> s:network-natt-mode:enable >>> >>> >>> >>> >>> >>> If needed I will post the relevant parts of the router too. >>> >>> Any help would be greatly appreciated. >>> >>> Thank you! >>> >>> _______________________________________________ >>> vpn-help mailing list >>> [email protected] >>> https://lists.shrew.net/mailman/listinfo/vpn-help >>> >>> >> >
_______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
