Hi Alexandru, What say the log of your Cisco VPN Gateway ?
When the VPN tunnel is UP, on Network Tab, there is Security Associations Established ? What Do you have configure on Policy Generation level ? Regards, On Thu, May 21, 2015 at 10:23 AM, Alexandru Duzsardi < [email protected]> wrote: > Hello, > > I’m trying to change our Cisco vpn clients with Shrew , as many of you > know that there are some issues with Cisco’s VPN client and windows 8(.1) > > I’ve already tried everything that I could find on the net but it did not > solve the issue. > > > > So back to the problem in hand , I’ve imported the vpn profile from cisco > client in shrew , it sets up the tunnel but I can’t ping any IP from the > internal network(s) at our office. > > We are using a Cisco IOS Software, C1700 Software > (C1700-ADVSECURITYK9-M), Version 12.4(6)XT2, RELEASE SOFTWARE (fc2) router > as our VPN concentrator > > I can post the relevant parts of the IPSec configuration if needed > > > > This is the client profile for now > > > > n:version:4 > > n:network-ike-port:500 > > n:network-mtu-size:1380 > > s:client-auto-mode:pull > > s:client-iface:virtual > > n:client-addr-auto:1 > > n:network-natt-port:4500 > > n:network-natt-rate:15 > > s:network-frag-mode:disable > > n:network-frag-size:540 > > n:network-dpd-enable:1 > > n:network-notify-enable:1 > > n:client-banner-enable:1 > > s:ident-server-type:any > > s:phase1-exchange:aggressive > > s:phase1-cipher:auto > > s:phase1-hash:auto > > n:phase1-dhgroup:2 > > n:phase1-life-secs:86400 > > s:phase2-transform:auto > > s:phase2-hmac:auto > > n:phase2-pfsgroup:0 > > s:ipcomp-transform:disabled > > n:client-dns-used:1 > > n:client-dns-auto:1 > > n:client-dns-suffix-auto:1 > > n:client-splitdns-used:1 > > n:client-splitdns-auto:1 > > n:client-wins-used:1 > > n:client-wins-auto:1 > > n:phase2-life-secs:3600 > > n:phase2-life-kbytes:0 > > n:policy-nailed:0 > > n:policy-list-auto:1 > > s:network-host:x.x.x.x (Public IP of the router) > > s:auth-method:mutual-psk-xauth > > s:ident-client-type:keyid > > s:ident-client-data:Work > > b:auth-mutual-psk:xxxxxxxxxxxxxxxx (Pre Shared Key) > > s:client-saved-username:imicev > > s:network-natt-mode:enable > > > > > > If needed I will post the relevant parts of the router too. > > Any help would be greatly appreciated. > > Thank you! > > _______________________________________________ > vpn-help mailing list > [email protected] > https://lists.shrew.net/mailman/listinfo/vpn-help > >
_______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
