Hi Neale,
Below is the trace.
Thanks!
Michael.
00:05:18:275995: dpdk-input
GigabitEthernet0/4/0 rx queue 0
buffer 0x446a: current data 14, length 68, free-list 0, clone-count 0,
totlen-nifb 0, trace 0x1
PKT MBUF: port 0, nb_segs 1, pkt_len 82
buf_len 2176, data_len 82, ol_flags 0x0, data_off 128, phys_addr
0x6990d980
packet_type 0x0
IP4: fa:16:3e:4a:b3:60 -> 01:00:5e:00:00:05
OSPF: 10.0.10.1 -> 224.0.0.5
tos 0xc0, ttl 1, length 68, checksum 0x2986
fragment id 0x9b15
00:05:18:276166: ip4-input
OSPF: 10.0.10.1 -> 224.0.0.5
tos 0xc0, ttl 1, length 68, checksum 0x2986
fragment id 0x9b15
00:05:18:276403: ip4-mfib-forward-lookup
fib 0 entry 0
00:05:18:276503: ip4-mfib-forward-rpf
entry 0 -1
00:05:18:276516: ip4-drop
OSPF: 10.0.10.1 -> 224.0.0.5
tos 0xc0, ttl 1, length 68, checksum 0x2986
fragment id 0x9b15
00:05:18:276595: error-drop
ip4-input: ip4 adjacency drop
On Tue, Oct 10, 2017 at 4:31 AM, Neale Ranns (nranns) <[email protected]>
wrote:
>
>
> Hi Michael,
>
>
>
> Could you give me a ‘sh trace’ ?
>
>
>
> Thanks,
>
> neale
>
>
>
> *From: *<[email protected]> on behalf of Michael Borokhovich <
> [email protected]>
> *Date: *Monday, 9 October 2017 at 18:14
> *To: *vpp-dev <[email protected]>
> *Subject: *[vpp-dev] Router plugin with VPP 1707 - incoming OSPF Hello
> packets are dropped by VPP
>
>
>
> Hi,
>
>
>
> After applying the fixes suggested by Jeff, I was able to compile the
> router plugin with VPP 1707.
>
>
>
> It runs and allows to enable tap-inject and set up interfaces addresses
> without crashing.
>
>
>
> The problem I'm facing now is with setting up FRR OSPF on top of the
> VPP+router plugin.
>
>
>
> FRR OSPF is configured and I see OSPF Hello packets flowing out of the
> machine. However, the incoming OSPF Hello packets are dropped by VPP (with
> the reason "ip4 adjacency drop") and never reach the FRR.
>
>
>
> The same settings worked with VPP 1609 + router plugin. Maybe I need to
> configure something manually in VPP to allow reception of OSPF multicast
> packets?
>
>
>
> So, to summarize the problem, incoming OSPF Hello packets are dropped by
> VPP, while the outgoing hello packets successfully sent by FRR via VPP to
> the neighbouring router.
>
>
>
> Any help is appreciated.
>
>
>
> Thanks,
>
> Michael.
>
>
>
>
>
>
_______________________________________________
vpp-dev mailing list
[email protected]
https://lists.fd.io/mailman/listinfo/vpp-dev
