Daniel It seems like you are stuck between a rock and a hard place !
Try this : - Get a copy of scsi probe and save to a floppy. Start up with your cd and then insert the floppy. Hopefully you will then be able to access the App ' scsi probe " off the floppy. Run it and see what it says ! Sending you a copy of scsiprobe direct mail Bob Daniel Forsdyke wrote: > Hi > > As some of you may remember I recently asked for Mac OS 7 software to get > this antique running. > > Thanks to Warren I have a Mac OS 7.6 CD which starts the machine. This has > presented another problem. > > The hard disk is not showing on the desktop. According to Mactracker the > machine has a SCSI HD of 80 - 160 MB. > > I can see a hard drive behind the removable back panel but cannot work out > how to remove it (short if dismantling the entire machine), also I am unsure > as to what I should look for in relation to why the hard disk is not > recognised. > > I tried using disk utility on the CD and was told that it could not detect > an SCSI drives!! > > Any ideas as to what might be going on, and what I might be able to do to > get it working. > > Thanks in advance. > > Regards > Daniel F. > > -- The WA Macintosh User Group Mailing List -- > Archives - <http://www.wamug.org.au/mailinglist/archives.html> > Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.html> > Unsubscribe - <mailto:[EMAIL PROTECTED]> > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
