If you only have one client, bridge the modem and use OSX's inbuilt
PPPoE client. You'll get a live IP and no NAT to traverse.
If you need to use more than one client you can try bridging and then
using OSX's Internet Connection Sharing to have on machine with a
live IP and the others behind a NAT.
Otherwise you can try setting the desired host as the one to be the
DMZ machine. Most firewalls have that option.
Mal
On 15/06/2005, at 12:50 PM, Greg Pennefather wrote:
Sorry to all for coming into this halfway but it sounds like some
of you are
having trouble with the type of NAT (network address translation) your
various routers/modems use. For any application needing to contact
another
client behind a NAT or be contacted behind a NAT there needs to be a
mechanism to traverse that NAT. Not all NATs are the same. Some
are full
cone NATs that are reasonably easy to traverse, some are restricted
cone
which are somewhat harder and then there are symmetric NATs which
are very
difficult and usually require some hardware on the Internet called
a session
border controller. The various NAT traversal mechanisms used can
cause
crashing on different routers/modems.
We are going to launch a VoIP telephone service in the next 3
months or so
and, as part of our preparation, we have tested about 20 of the
most common
ADSL modems/routers. We have found similar problems with some and
have had
to upgrade firmware and approach manufacturers with the problems to
try to
find a solution. Some of the routers/modems even crashed our STUN
server
(used for the NAT traversal) - so it is a bit of a new area for
some vendors
and service providers.
If you are interested, check out the terrific article in the IP
Journal by
Geoff Huston at
http://www.cisco.com/en/US/about/ac123/ac147/archived_issues/
ipj_7-3/index.h
tml
Sorry there's no solution here but it gives you some idea of what
may be
happening.
Regards
Greg
From: Shay Telfer <[EMAIL PROTECTED]>
Date: Wed, 15 Jun 2005 09:39:12 +0800
To: WAMUG Mailing List <[email protected]>
Subject: Re: Billion 5100 and iChat AV?
Good chance it might be like the Dlink I had. Everytime I would try
audio chat, the router would crash. I have swapped to a Netgear and
have no trouble with audio chat. Any chance you have another
router or modem to try?
Yes, my D-Link has the same problem, despite the firmware updates and
DNS changes recommended by various sources.
Have fun,
Shay
--
=========================== Shay Telfer
================================
Perth, Western Australia Technomancer Join Team Sungroper in the
Opinions for hire [POQ] 2005 World Solar Challenge
http://public.xdi.org/=Shay fnord <http://sungroper.asn.au/>
-- The WA Macintosh User Group Mailing List --
Archives - <http://www.wamug.org.au/mailinglist/archives.shtml>
Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.shtml>
Unsubscribe - <mailto:[EMAIL PROTECTED]>
WAMUG is powered by Stalker CommuniGatePro
-- The WA Macintosh User Group Mailing List --
Archives - <http://www.wamug.org.au/mailinglist/archives.shtml>
Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.shtml>
Unsubscribe - <mailto:[EMAIL PROTECTED]>
WAMUG is powered by Stalker CommuniGatePro
