On 16/06/2009, at 7:04 PM, F.W. Hänel wrote:
Hi guys,
My EyeTV Hybrid 3.0 has not mounted occasionally with the iMac
starting up even though it is
configured as a start-up item.
When I start it manually it comes with the alert:
"The EyeTV hybrid device will not operate because it is connected to
a USB 1.1 port.
It should be connected to an available USB 2.0 port"
As soon as I click the alert away it starts and works normally.
The message does not make sense as I'm using an Intel G5 iMac with
10.5.7 which
has only USB 2.0 ports and the EyeTv tuner is connected to one.
Any useful suggestions are appreciated.
What else is running on your USB bus ?
If there is a USB1.1 device on that bus the bus will slow down to
USB1.1 speeds
also
Try replacing your USB cable with another good quality cable
Bob
Thanks
Walter
-- The WA Macintosh User Group Mailing List --
Archives - <http://www.wamug.org.au/mailinglist/archives.shtml>
Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.shtml>
Unsubscribe - <mailto:[email protected]>
-- The WA Macintosh User Group Mailing List --
Archives - <http://www.wamug.org.au/mailinglist/archives.shtml>
Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.shtml>
Unsubscribe - <mailto:[email protected]>
