Hi Bob, Jim pretty much cover what is needed to interface the WMII with a Raspberry Pi. For the hardware you will need: a data logger for the WMII and a Serial Interface for the Pi.
For the software, assuming you will be using Raspbian, follow the instructions to install weeWX on a Debian here: http://www.weewx.com/docs/debian.htm After installing weeWX, follow the instructions in my github repository for installing the WMII driver here: https://github.com/jardiamj/wmII If you get stuck just send me an email or leave me a message on the github repository. Jim, thanks for the mention in your website. That's a nice looking website, by the way. Jardi. On Sunday, December 29, 2019 at 4:07:40 AM UTC-8, Jim Brand wrote: > > Jardi wrote a driver for the weather monitor II, which I have been using > successfully on both a pi zero and/or a pi one. It can be found here. I am > successfully feeding a half dozen other weather sources. > > https://github.com/jardiamj/wmII > > You'll need the weather logger/serial interface for the weather monitor. > You can still find them if you look hard. And don't have one. You'll also > need a serial interface for the pi. They are cheap on Amazon or elsewhere, > less than 10 bucks. > > If it is of interest to you, you can see some of that here. > http://www.jimbrand.net/weather.html > > If you are brand new to the pi or this type of project, there is a bit to > be learned here, but it is a fun journey and it works well when done. > > Hope this helps a little. > > Jim > > On Sat, Dec 28, 2019, 7:20 PM Bob Jonas <[email protected] <javascript:>> > wrote: > >> Im looking to tie a WM2 to a Raspberry Pi. >> Either by using existing software or by other means. Problem is I'm new >> Raspberry Pi. >> >> If you have any insight or direction you could point me, that would be >> greatly appreciated! >> >> Thanks >> Bob >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-development" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-development/2521edf1-51b8-430b-9b74-9aefab1bf19d%40googlegroups.com >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-development" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-development/cc9fa64b-3434-4953-9d1b-8ea90c1fdf3f%40googlegroups.com.
