Thank you ! I fix the issue for extra sensor when you request directly on your wll module.
Can you share right now the answer of API v2 of Weatherlink.com like this : https://weatherlink.github.io/v2-api/authentication#walkthrough-examples It help me full because I think that the structure is not the same that the wll module :) -fp Le dimanche 28 juin 2020 à 12:15:37 UTC+2, hoev...@gmail.com a écrit : > Sure! > > {"data":{"did":"001D0A71154A","ts":1593339301,"conditions":[{"lsid":321275,"data_structure_type":1,"txid":2,"temp": > > 67.6,"hum":59.0,"dew_point": 52.8,"wet_bulb": 57.3,"heat_index": > 67.3,"wind_chill": 64.1,"thw_index": 63.8,"thsw_index": > 71.5,"wind_speed_last":11.00,"wind_dir_last":203,"wind_speed_avg_last_1_min":11.56,"wind_dir_scalar_avg_last_1_min":215,"wind_speed_avg_last_2_min":11.81,"wind_dir_scalar_avg_last_2_min":217,"wind_speed_hi_last_2_min":18.00,"wind_dir_at_hi_speed_last_2_min":225,"wind_speed_avg_last_10_min":12.75,"wind_dir_scalar_avg_last_10_min":219,"wind_speed_hi_last_10_min":20.00,"wind_dir_at_hi_speed_last_10_min":225,"rain_size":2,"rain_rate_last":0,"rain_rate_hi":0,"rainfall_last_15_min":0,"rain_rate_hi_last_15_min":0,"rainfall_last_60_min":0,"rainfall_last_24_hr":20,"rain_storm":24,"rain_storm_start_at":1593210300,"solar_rad":207,"uv_index":2.1,"rx_state":0,"trans_battery_flag":0,"rainfall_daily":0,"rainfall_monthly":175,"rainfall_year":175,"rain_storm_last":6,"rain_storm_last_start_at":1592760421,"rain_storm_last_end_at":1592866861},{"lsid":321279,"data_structure_type":1,"txid":3,"temp": > > 72.0,"hum":null,"dew_point":null,"wet_bulb":null,"heat_index":null,"wind_chill":null,"thw_index":null,"thsw_index":null,"wind_speed_last":null,"wind_dir_last":null,"wind_speed_avg_last_1_min":null,"wind_dir_scalar_avg_last_1_min":null,"wind_speed_avg_last_2_min":null,"wind_dir_scalar_avg_last_2_min":null,"wind_speed_hi_last_2_min":null,"wind_dir_at_hi_speed_last_2_min":null,"wind_speed_avg_last_10_min":null,"wind_dir_scalar_avg_last_10_min":null,"wind_speed_hi_last_10_min":null,"wind_dir_at_hi_speed_last_10_min":null,"rain_size":1,"rain_rate_last":0,"rain_rate_hi":0,"rainfall_last_15_min":0,"rain_rate_hi_last_15_min":0,"rainfall_last_60_min":0,"rainfall_last_24_hr":0,"rain_storm":null,"rain_storm_start_at":null,"solar_rad":null,"uv_index":null,"rx_state":0,"trans_battery_flag":0,"rainfall_daily":0,"rainfall_monthly":0,"rainfall_year":0,"rain_storm_last":null,"rain_storm_last_start_at":null,"rain_storm_last_end_at":null},{"lsid":321271,"data_structure_type":4,"temp_in": > > 76.4,"hum_in":47.0,"dew_point_in": 54.7,"heat_index_in": > 76.1},{"lsid":321270,"data_structure_type":3,"bar_sea_level":29.889,"bar_trend": > > 0.031,"bar_absolute":29.876}]},"error":null} > > ISS on ID=2, extra temp sensor on ID=3 > > > > Op zondag 28 juni 2020 12:13:08 UTC+2 schreef flor...@pre-vost.fr: > >> Hi Maarten, >> >> To help Bastiaan and me to WLL Driver, can you share the answer of your >> request of http://1.2.3.4/v1/current_conditions (change 1.2.3.4 by your >> internal IP) ? >> You've another sensor with other ID and it will be helpfull to have this >> data to implement it on driver, >> >> Thank you ! >> >> Le samedi 27 juin 2020 à 10:53:21 UTC+2, flor...@pre-vost.fr a écrit : >> >>> Hi, >>> >>> Baastian, yes of course, I think it a good idea to make a request using >>> weewx object to read the daily rain to the database and make a comparison >>> with the rainfall daily by the WLL but I need the help of @Tom Keffer for >>> this. >>> >>> For UnitUS, I know that if it possible but for readability, I decided to >>> make a conversion before yield the packet to the genlooppackets(). Also, >>> when i need to add record manual by using the method addRecords, I need to >>> put on the packet the right unit set in weewx.conf. If you've another >>> suggest, let me know :) >>> >>> Maarten, I will fix this issue in few days, I know how can I do this by >>> search any key in each sensor :) >>> >>> -fp >>> >>> Le samedi 27 juin 2020 à 10:40:09 UTC+2, hoev...@gmail.com a écrit : >>> >>>> Hello Bastiaan, >>>> >>>> The WLL is a wonderful piece of equipment. Now I can run production >>>> with WeeWX, and start a test-enviroment in a virtual machine, while >>>> talking >>>> to the same WLL. >>>> >>>> I've installed your driver. I have running my ISS on ID 2 (and have an >>>> external temp sensor running on sensor 3). >>>> >>>> When ISS set to ID=2, I only seems to see internal sensor data, like: >>>> >>>> LOOP: 2020-06-27 10:37:51 CEST (1593247071) altimeter: >>>> 1008.6586993806619, barometer: 1009.0082158009718, dateTime: 1593247071, >>>> inDewpoint: 17.27777777777778, inHumidity: 55.1, inTemp: >>>> 27.055555555555557, maxSolarRad: None, pressure: 1008.5679853403257, >>>> rainRate: 0.0, usUnits: 17 >>>> {'data': {'broadcast_port': 22222, 'duration': 3600}, 'error': None} >>>> LOOP: 2020-06-27 10:37:51 CEST (1593247071) dateTime: 1593247071, >>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17 >>>> LOOP: 2020-06-27 10:37:53 CEST (1593247073) dateTime: 1593247073, >>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17 >>>> LOOP: 2020-06-27 10:37:56 CEST (1593247076) dateTime: 1593247076, >>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17 >>>> LOOP: 2020-06-27 10:37:58 CEST (1593247078) dateTime: 1593247078, >>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17 >>>> LOOP: 2020-06-27 10:38:01 CEST (1593247081) dateTime: 1593247081, >>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17 >>>> LOOP: 2020-06-27 10:38:03 CEST (1593247083) dateTime: 1593247083, >>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17 >>>> LOOP: 2020-06-27 10:38:06 CEST (1593247086) dateTime: 1593247086, >>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17 >>>> LOOP: 2020-06-27 10:38:06 CEST (1593247086) altimeter: >>>> 1008.6925672055719, barometer: 1009.04207968256, dateTime: 1593247086, >>>> inDewpoint: 17.27777777777778, inHumidity: 55.1, inTemp: >>>> 27.055555555555557, maxSolarRad: None, pressure: 1008.6018492219138, >>>> rainRate: 0.0, usUnits: 17 >>>> LOOP: 2020-06-27 10:38:08 CEST (1593247088) dateTime: 1593247088, >>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17 >>>> >>>> >>>> >>>> When set ISS to ID=1, I see the same >>>> >>>> LOOP: 2020-06-27 10:38:56 CEST (1593247136) altimeter: >>>> 1008.7264350305117, barometer: 1009.075943564148, dateTime: 1593247136, >>>> inDewpoint: 17.22222222222222, inHumidity: 54.9, inTemp: >>>> 27.055555555555557, maxSolarRad: None, pressure: 1008.635713103502, >>>> rainRate: 0.0, usUnits: 17 >>>> {'data': {'broadcast_port': 22222, 'duration': 3600}, 'error': None} >>>> LOOP: 2020-06-27 10:38:56 CEST (1593247136) dateTime: 1593247136, >>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17 >>>> LOOP: 2020-06-27 10:38:58 CEST (1593247138) dateTime: 1593247138, >>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17 >>>> LOOP: 2020-06-27 10:39:01 CEST (1593247141) dateTime: 1593247141, >>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17 >>>> LOOP: 2020-06-27 10:39:03 CEST (1593247143) dateTime: 1593247143, >>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17 >>>> LOOP: 2020-06-27 10:39:06 CEST (1593247146) dateTime: 1593247146, >>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17 >>>> LOOP: 2020-06-27 10:39:08 CEST (1593247148) dateTime: 1593247148, >>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17 >>>> LOOP: 2020-06-27 10:39:11 CEST (1593247151) dateTime: 1593247151, >>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17 >>>> LOOP: 2020-06-27 10:39:11 CEST (1593247151) altimeter: >>>> 1008.6586993806619, barometer: 1009.0082158009718, dateTime: 1593247151, >>>> inDewpoint: 17.27777777777778, inHumidity: 55.1, inTemp: >>>> 27.055555555555557, maxSolarRad: None, pressure: 1008.5679853403257, >>>> rainRate: 0.0, usUnits: 17 >>>> LOOP: 2020-06-27 10:39:13 CEST (1593247153) dateTime: 1593247153, >>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17 >>>> >>>> Op zaterdag 27 juni 2020 om 10:17:55 UTC+2 schreef Bastiaan Meelberg: >>>> >>>>> Python is pretty new to me, I was unaware of the use of the _packet >>>>> underscore method. I will update my code. Thanks for the tip. >>>>> >>>>> Have a look at the rain calculations, I found out yesterday, during a >>>>> rain shower, setting the self.rain_previous_period to zero is not a >>>>> good idea. If weewx is reloading the diver (and it does) it will add the >>>>> daily rain as a whole new rainfall. I will update my repo during the day. >>>>> >>>>> Also at midnight WLL will reset the rain_daily, so at that moment the >>>>> rain_previous must be reset. >>>>> >>>>> I also don't think you need to do all the METRIC and METRICWX >>>>> conversions. Weewx will do that for you, if you set the 'usUnits': >>>>> weewx.US in the _packet. The LOOP will be generated and weewx is >>>>> adding the record using the set database metrics. >>>>> >>>>> >>>>> >>>>> On Friday, June 26, 2020 at 6:56:18 PM UTC+2, flor...@pre-vost.fr >>>>> wrote: >>>>>> >>>>>> Hi everyone and thank you for your support ! I'm very glade to know >>>>>> that people want to make this driver because there are not a lot. >>>>>> >>>>>> This is my repo : https://github.com/Drealine/WLLDriver >>>>>> >>>>>> @Bastiaan it's very nice ! Just, why you use update packet or not >>>>>> simply do a for _packet in blabla(): It's a udp protocol ? >>>>>> >>>>>> With my driver, you can retrive lost data by using API v2 of >>>>>> Weatherlink. Depend to your subscription. >>>>>> >>>>>> Glad to work with you, and if you want, it will be more often that >>>>>> split some git to one. >>>>>> >>>>>> Regards, -fp >>>>>> >>>>>> Le vendredi 26 juin 2020 à 18:35:45 UTC+2, Bastiaan Meelberg a écrit : >>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> I’m also working on a wll driver, including The 2,5 UDP packages. It >>>>>>> is running now for a few days with good results (no rain check yet). >>>>>>> The integration with the online fetch sounds interesting! >>>>>>> This is my git fork: >>>>>>> https://github.com/grebleem/WeatherLinkliveUDP >>>>>>> >>>>>>> It is feeding my site: https://meteo-otterlo.nl >>>>>>> >>>>>>> Cheers, Bastiaan >>>>>>> >>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-development" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-development+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-development/e17e76c6-d84a-4b37-af1c-41b2f1b167fbn%40googlegroups.com.
