Current:
{"data":{"did":"001D0A71154A","ts":1593501864,"conditions":[{"lsid":325304,"data_structure_type":1,"txid":2,"temp":
58.1,"hum":82.8,"dew_point": 52.9,"wet_bulb": 54.8,"heat_index":
58.1,"wind_chill": 54.8,"thw_index": 54.8,"thsw_index":
55.2,"wind_speed_last":6.00,"wind_dir_last":215,"wind_speed_avg_last_1_min":6.37,"wind_dir_scalar_avg_last_1_min":218,"wind_speed_avg_last_2_min":7.50,"wind_dir_scalar_avg_last_2_min":219,"wind_speed_hi_last_2_min":14.00,"wind_dir_at_hi_speed_last_2_min":167,"wind_speed_avg_last_10_min":9.87,"wind_dir_scalar_avg_last_10_min":220,"wind_speed_hi_last_10_min":20.00,"wind_dir_at_hi_speed_last_10_min":234,"rain_size":2,"rain_rate_last":0,"rain_rate_hi":0,"rainfall_last_15_min":0,"rain_rate_hi_last_15_min":0,"rainfall_last_60_min":0,"rainfall_last_24_hr":0,"rain_storm":null,"rain_storm_start_at":null,"solar_rad":95,"uv_index":0.0,"rx_state":1,"trans_battery_flag":0,"rainfall_daily":0,"rainfall_monthly":0,"rainfall_year":0,"rain_storm_last":null,"rain_storm_last_start_at":null,"rain_storm_last_end_at":null},{"lsid":325305,"data_structure_type":1,"txid":3,"temp":
58.7,"hum":null,"dew_point":null,"wet_bulb":null,"heat_index":null,"wind_chill":null,"thw_index":null,"thsw_index":null,"wind_speed_last":null,"wind_dir_last":null,"wind_speed_avg_last_1_min":null,"wind_dir_scalar_avg_last_1_min":null,"wind_speed_avg_last_2_min":null,"wind_dir_scalar_avg_last_2_min":null,"wind_speed_hi_last_2_min":null,"wind_dir_at_hi_speed_last_2_min":null,"wind_speed_avg_last_10_min":null,"wind_dir_scalar_avg_last_10_min":null,"wind_speed_hi_last_10_min":null,"wind_dir_at_hi_speed_last_10_min":null,"rain_size":1,"rain_rate_last":0,"rain_rate_hi":0,"rainfall_last_15_min":0,"rain_rate_hi_last_15_min":0,"rainfall_last_60_min":0,"rainfall_last_24_hr":0,"rain_storm":null,"rain_storm_start_at":null,"solar_rad":null,"uv_index":null,"rx_state":0,"trans_battery_flag":0,"rainfall_daily":0,"rainfall_monthly":0,"rainfall_year":0,"rain_storm_last":null,"rain_storm_last_start_at":null,"rain_storm_last_end_at":null},{"lsid":325296,"data_structure_type":4,"temp_in":
68.3,"hum_in":54.3,"dew_point_in": 51.2,"heat_index_in":
67.6},{"lsid":325295,"data_structure_type":3,"bar_sea_level":29.769,"bar_trend":
0.018,"bar_absolute":29.757}]},"error":null}
Op dinsdag 30 juni 2020 om 09:20:16 UTC+2 schreef Maarten van der Hoeven:
> I'd love to do that, need littile help.
>
> How do I retrieve my station_id? I can use the V2 api tho retrieve it, but
> I need a api-signature to get that information. And to calculate the
> api-signuature, I need my station-id.
>
> Chicken and egg
>
> This is the string (example) to calculate the api-signature (SHA256). You
> see there's the station-id in it, which I do not know.
>
> api-key987654321station-id1052t1558729481
>
> Op dinsdag 30 juni 2020 om 08:11:10 UTC+2 schreef [email protected]:
>
>> Thank you !
>>
>> I fix the issue for extra sensor when you request directly on your wll
>> module.
>>
>> Can you share right now the answer of API v2 of Weatherlink.com like this
>> :
>> https://weatherlink.github.io/v2-api/authentication#walkthrough-examples
>>
>> It help me full because I think that the structure is not the same that
>> the wll module :)
>>
>> -fp
>> Le dimanche 28 juin 2020 à 12:15:37 UTC+2, [email protected] a écrit :
>>
>>> Sure!
>>>
>>> {"data":{"did":"001D0A71154A","ts":1593339301,"conditions":[{"lsid":321275,"data_structure_type":1,"txid":2,"temp":
>>>
>>> 67.6,"hum":59.0,"dew_point": 52.8,"wet_bulb": 57.3,"heat_index":
>>> 67.3,"wind_chill": 64.1,"thw_index": 63.8,"thsw_index":
>>> 71.5,"wind_speed_last":11.00,"wind_dir_last":203,"wind_speed_avg_last_1_min":11.56,"wind_dir_scalar_avg_last_1_min":215,"wind_speed_avg_last_2_min":11.81,"wind_dir_scalar_avg_last_2_min":217,"wind_speed_hi_last_2_min":18.00,"wind_dir_at_hi_speed_last_2_min":225,"wind_speed_avg_last_10_min":12.75,"wind_dir_scalar_avg_last_10_min":219,"wind_speed_hi_last_10_min":20.00,"wind_dir_at_hi_speed_last_10_min":225,"rain_size":2,"rain_rate_last":0,"rain_rate_hi":0,"rainfall_last_15_min":0,"rain_rate_hi_last_15_min":0,"rainfall_last_60_min":0,"rainfall_last_24_hr":20,"rain_storm":24,"rain_storm_start_at":1593210300,"solar_rad":207,"uv_index":2.1,"rx_state":0,"trans_battery_flag":0,"rainfall_daily":0,"rainfall_monthly":175,"rainfall_year":175,"rain_storm_last":6,"rain_storm_last_start_at":1592760421,"rain_storm_last_end_at":1592866861},{"lsid":321279,"data_structure_type":1,"txid":3,"temp":
>>>
>>> 72.0,"hum":null,"dew_point":null,"wet_bulb":null,"heat_index":null,"wind_chill":null,"thw_index":null,"thsw_index":null,"wind_speed_last":null,"wind_dir_last":null,"wind_speed_avg_last_1_min":null,"wind_dir_scalar_avg_last_1_min":null,"wind_speed_avg_last_2_min":null,"wind_dir_scalar_avg_last_2_min":null,"wind_speed_hi_last_2_min":null,"wind_dir_at_hi_speed_last_2_min":null,"wind_speed_avg_last_10_min":null,"wind_dir_scalar_avg_last_10_min":null,"wind_speed_hi_last_10_min":null,"wind_dir_at_hi_speed_last_10_min":null,"rain_size":1,"rain_rate_last":0,"rain_rate_hi":0,"rainfall_last_15_min":0,"rain_rate_hi_last_15_min":0,"rainfall_last_60_min":0,"rainfall_last_24_hr":0,"rain_storm":null,"rain_storm_start_at":null,"solar_rad":null,"uv_index":null,"rx_state":0,"trans_battery_flag":0,"rainfall_daily":0,"rainfall_monthly":0,"rainfall_year":0,"rain_storm_last":null,"rain_storm_last_start_at":null,"rain_storm_last_end_at":null},{"lsid":321271,"data_structure_type":4,"temp_in":
>>>
>>> 76.4,"hum_in":47.0,"dew_point_in": 54.7,"heat_index_in":
>>> 76.1},{"lsid":321270,"data_structure_type":3,"bar_sea_level":29.889,"bar_trend":
>>>
>>> 0.031,"bar_absolute":29.876}]},"error":null}
>>>
>>> ISS on ID=2, extra temp sensor on ID=3
>>>
>>>
>>>
>>> Op zondag 28 juni 2020 12:13:08 UTC+2 schreef [email protected]:
>>>
>>>> Hi Maarten,
>>>>
>>>> To help Bastiaan and me to WLL Driver, can you share the answer of your
>>>> request of http://1.2.3.4/v1/current_conditions (change 1.2.3.4 by
>>>> your internal IP) ?
>>>> You've another sensor with other ID and it will be helpfull to have
>>>> this data to implement it on driver,
>>>>
>>>> Thank you !
>>>>
>>>> Le samedi 27 juin 2020 à 10:53:21 UTC+2, [email protected] a écrit :
>>>>
>>>>> Hi,
>>>>>
>>>>> Baastian, yes of course, I think it a good idea to make a request
>>>>> using weewx object to read the daily rain to the database and make a
>>>>> comparison with the rainfall daily by the WLL but I need the help of @Tom
>>>>> Keffer for this.
>>>>>
>>>>> For UnitUS, I know that if it possible but for readability, I decided
>>>>> to make a conversion before yield the packet to the genlooppackets().
>>>>> Also,
>>>>> when i need to add record manual by using the method addRecords, I need
>>>>> to
>>>>> put on the packet the right unit set in weewx.conf. If you've another
>>>>> suggest, let me know :)
>>>>>
>>>>> Maarten, I will fix this issue in few days, I know how can I do this
>>>>> by search any key in each sensor :)
>>>>>
>>>>> -fp
>>>>>
>>>>> Le samedi 27 juin 2020 à 10:40:09 UTC+2, [email protected] a écrit :
>>>>>
>>>>>> Hello Bastiaan,
>>>>>>
>>>>>> The WLL is a wonderful piece of equipment. Now I can run production
>>>>>> with WeeWX, and start a test-enviroment in a virtual machine, while
>>>>>> talking
>>>>>> to the same WLL.
>>>>>>
>>>>>> I've installed your driver. I have running my ISS on ID 2 (and have
>>>>>> an external temp sensor running on sensor 3).
>>>>>>
>>>>>> When ISS set to ID=2, I only seems to see internal sensor data, like:
>>>>>>
>>>>>> LOOP: 2020-06-27 10:37:51 CEST (1593247071) altimeter:
>>>>>> 1008.6586993806619, barometer: 1009.0082158009718, dateTime: 1593247071,
>>>>>> inDewpoint: 17.27777777777778, inHumidity: 55.1, inTemp:
>>>>>> 27.055555555555557, maxSolarRad: None, pressure: 1008.5679853403257,
>>>>>> rainRate: 0.0, usUnits: 17
>>>>>> {'data': {'broadcast_port': 22222, 'duration': 3600}, 'error': None}
>>>>>> LOOP: 2020-06-27 10:37:51 CEST (1593247071) dateTime: 1593247071,
>>>>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17
>>>>>> LOOP: 2020-06-27 10:37:53 CEST (1593247073) dateTime: 1593247073,
>>>>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17
>>>>>> LOOP: 2020-06-27 10:37:56 CEST (1593247076) dateTime: 1593247076,
>>>>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17
>>>>>> LOOP: 2020-06-27 10:37:58 CEST (1593247078) dateTime: 1593247078,
>>>>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17
>>>>>> LOOP: 2020-06-27 10:38:01 CEST (1593247081) dateTime: 1593247081,
>>>>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17
>>>>>> LOOP: 2020-06-27 10:38:03 CEST (1593247083) dateTime: 1593247083,
>>>>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17
>>>>>> LOOP: 2020-06-27 10:38:06 CEST (1593247086) dateTime: 1593247086,
>>>>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17
>>>>>> LOOP: 2020-06-27 10:38:06 CEST (1593247086) altimeter:
>>>>>> 1008.6925672055719, barometer: 1009.04207968256, dateTime: 1593247086,
>>>>>> inDewpoint: 17.27777777777778, inHumidity: 55.1, inTemp:
>>>>>> 27.055555555555557, maxSolarRad: None, pressure: 1008.6018492219138,
>>>>>> rainRate: 0.0, usUnits: 17
>>>>>> LOOP: 2020-06-27 10:38:08 CEST (1593247088) dateTime: 1593247088,
>>>>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17
>>>>>>
>>>>>>
>>>>>>
>>>>>> When set ISS to ID=1, I see the same
>>>>>>
>>>>>> LOOP: 2020-06-27 10:38:56 CEST (1593247136) altimeter:
>>>>>> 1008.7264350305117, barometer: 1009.075943564148, dateTime: 1593247136,
>>>>>> inDewpoint: 17.22222222222222, inHumidity: 54.9, inTemp:
>>>>>> 27.055555555555557, maxSolarRad: None, pressure: 1008.635713103502,
>>>>>> rainRate: 0.0, usUnits: 17
>>>>>> {'data': {'broadcast_port': 22222, 'duration': 3600}, 'error': None}
>>>>>> LOOP: 2020-06-27 10:38:56 CEST (1593247136) dateTime: 1593247136,
>>>>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17
>>>>>> LOOP: 2020-06-27 10:38:58 CEST (1593247138) dateTime: 1593247138,
>>>>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17
>>>>>> LOOP: 2020-06-27 10:39:01 CEST (1593247141) dateTime: 1593247141,
>>>>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17
>>>>>> LOOP: 2020-06-27 10:39:03 CEST (1593247143) dateTime: 1593247143,
>>>>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17
>>>>>> LOOP: 2020-06-27 10:39:06 CEST (1593247146) dateTime: 1593247146,
>>>>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17
>>>>>> LOOP: 2020-06-27 10:39:08 CEST (1593247148) dateTime: 1593247148,
>>>>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17
>>>>>> LOOP: 2020-06-27 10:39:11 CEST (1593247151) dateTime: 1593247151,
>>>>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17
>>>>>> LOOP: 2020-06-27 10:39:11 CEST (1593247151) altimeter:
>>>>>> 1008.6586993806619, barometer: 1009.0082158009718, dateTime: 1593247151,
>>>>>> inDewpoint: 17.27777777777778, inHumidity: 55.1, inTemp:
>>>>>> 27.055555555555557, maxSolarRad: None, pressure: 1008.5679853403257,
>>>>>> rainRate: 0.0, usUnits: 17
>>>>>> LOOP: 2020-06-27 10:39:13 CEST (1593247153) dateTime: 1593247153,
>>>>>> maxSolarRad: None, rainRate: 0.0, usUnits: 17
>>>>>>
>>>>>> Op zaterdag 27 juni 2020 om 10:17:55 UTC+2 schreef Bastiaan Meelberg:
>>>>>>
>>>>>>> Python is pretty new to me, I was unaware of the use of the _packet
>>>>>>> underscore method. I will update my code. Thanks for the tip.
>>>>>>>
>>>>>>> Have a look at the rain calculations, I found out yesterday, during
>>>>>>> a rain shower, setting the self.rain_previous_period to zero is
>>>>>>> not a good idea. If weewx is reloading the diver (and it does) it will
>>>>>>> add
>>>>>>> the daily rain as a whole new rainfall. I will update my repo during
>>>>>>> the
>>>>>>> day.
>>>>>>>
>>>>>>> Also at midnight WLL will reset the rain_daily, so at that moment
>>>>>>> the rain_previous must be reset.
>>>>>>>
>>>>>>> I also don't think you need to do all the METRIC and METRICWX
>>>>>>> conversions. Weewx will do that for you, if you set the 'usUnits':
>>>>>>> weewx.US in the _packet. The LOOP will be generated and weewx is
>>>>>>> adding the record using the set database metrics.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Friday, June 26, 2020 at 6:56:18 PM UTC+2, [email protected]
>>>>>>> wrote:
>>>>>>>>
>>>>>>>> Hi everyone and thank you for your support ! I'm very glade to know
>>>>>>>> that people want to make this driver because there are not a lot.
>>>>>>>>
>>>>>>>> This is my repo : https://github.com/Drealine/WLLDriver
>>>>>>>>
>>>>>>>> @Bastiaan it's very nice ! Just, why you use update packet or not
>>>>>>>> simply do a for _packet in blabla(): It's a udp protocol ?
>>>>>>>>
>>>>>>>> With my driver, you can retrive lost data by using API v2 of
>>>>>>>> Weatherlink. Depend to your subscription.
>>>>>>>>
>>>>>>>> Glad to work with you, and if you want, it will be more often that
>>>>>>>> split some git to one.
>>>>>>>>
>>>>>>>> Regards, -fp
>>>>>>>>
>>>>>>>> Le vendredi 26 juin 2020 à 18:35:45 UTC+2, Bastiaan Meelberg a
>>>>>>>> écrit :
>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> I’m also working on a wll driver, including The 2,5 UDP packages.
>>>>>>>>> It is running now for a few days with good results (no rain check
>>>>>>>>> yet).
>>>>>>>>> The integration with the online fetch sounds interesting!
>>>>>>>>> This is my git fork:
>>>>>>>>> https://github.com/grebleem/WeatherLinkliveUDP
>>>>>>>>>
>>>>>>>>> It is feeding my site: https://meteo-otterlo.nl
>>>>>>>>>
>>>>>>>>> Cheers, Bastiaan
>>>>>>>>>
>>>>>>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-development" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-development/293801da-ce21-4cb6-8bf5-57b6ee9c3cdcn%40googlegroups.com.
