It's not UV for sure. UV looks something like image attached (it was a cloudy day here). It must be a bogus channel you catch on air or some metric flagged as UV. It looks like barometer data, if anything.
On Sunday, April 11, 2021 at 9:14:13 PM UTC+2 [email protected] wrote: > One more question: > > I noticed that I’m logging UV data, which is not a sensor that I have. I > don’t quite have enough data to infer any correlations, but it does seem to > be somewhat correlated with daytime. Any ideas what this might be? I've > attached some logs. Is this useful data that I could be logging by changing > the sensor map, or should I just tell weewx.conf that I don't have a UV > sensor? > > > > > > On Fri, Apr 9, 2021 at 19:49 [email protected] <[email protected]> > wrote: > >> I use the following driver: https://gitlab.com/wjcarpenter/bme280wx >> >> On Friday, April 9, 2021 at 10:22:36 PM UTC-4 [email protected] wrote: >> >>> Perfect, thank you. I was just googling around for something like this. >>> >>> On Fri, Apr 9, 2021 at 19:15 [email protected] <[email protected]> >>> wrote: >>> >>>> You can use a BME280 sensor for the pressure. Here is one I use: >>>> https://www.amazon.com/Adafruit-BME280-Temperature-Humidity-Pressure/dp/B013W1AJUY/ref=sr_1_7?dchild=1&keywords=bme280&qid=1618020646&sr=8-7 >>>> >>>> >>>> I been using this driver for a couple of years without any issues on >>>> one of my RPIs. >>>> >>>> On Friday, April 9, 2021 at 3:57:59 PM UTC-4 [email protected] wrote: >>>> >>>>> Well that would certainly do it. Thank you for your help! >>>>> >>>>> On Fri, Apr 9, 2021 at 12:22 PM Lucas Heijst <[email protected]> >>>>> wrote: >>>>> >>>>>> The pressure sensor is in the Davis console; you can’t read this data >>>>>> with this driver. >>>>>> >>>>>> Op vrijdag 9 april 2021 om 16:06:21 UTC-3 schreef [email protected] >>>>>> : >>>>>> >>>>>>> Hi Luc, >>>>>>> >>>>>>> Ok I took a look at the weewx web interface and it does look like >>>>>>> it's receiving data, which is good! I had not checked before because I >>>>>>> thought the driver was not working. It's just this that fails: >>>>>>> >>>>>>> pi@wxpi:~ $ sudo PYTHONPATH=/usr/share/weewx python3 >>>>>>> /usr/share/weewx/user/rtldavis.py --cmd="/home/pi/work/bin/rtldavis >>>>>>> --tf US" >>>>>>> >>>>>>> Weewx itself seems fine though, no errors in the logs. >>>>>>> >>>>>>> Not a big deal for me, but if you would like to continue >>>>>>> troubleshooting the driver I am happy to help. >>>>>>> >>>>>>> Unrelated (?) question. I don't seem to be getting any pressure >>>>>>> data. Station is a Vantage Pro 2. Maybe the loop period needs to be >>>>>>> longer? >>>>>>> Happy to attach some data if that is helpful. >>>>>>> >>>>>>> Cheers, >>>>>>> --a >>>>>>> >>>>>>> On Fri, Apr 9, 2021 at 4:37 AM Lucas Heijst <[email protected]> >>>>>>> wrote: >>>>>>> >>>>>>>> Hi Arlen, >>>>>>>> >>>>>>>> Running weewx directly seems to be broken. I have to look at that. >>>>>>>> Please set debug=1 in weewx.conf and run weewx as a daemon. >>>>>>>> Then send the log file from start till the first error. >>>>>>>> >>>>>>>> Op vrijdag 9 april 2021 om 03:53:36 UTC-3 schreef >>>>>>>> [email protected]: >>>>>>>> >>>>>>>>> Hi Luc, >>>>>>>>> >>>>>>>>> Sorry for the thread necromancy but I'm not really sure what the >>>>>>>>> norms are around starting new threads or opening github issues. I'm >>>>>>>>> having >>>>>>>>> the same issue as uvedhe, but I believe that I am getting data, it >>>>>>>>> just >>>>>>>>> takes a while. >>>>>>>>> >>>>>>>>> For example, here's what happens when I run rtldavis directly >>>>>>>>> >>>>>>>>> pi@wxpi:/ $ $GOPATH/bin/rtldavis -tf US >>>>>>>>> 23:31:41.484368 rtldavis.go VERSION=0.15 >>>>>>>>> 23:31:41.485107 tr=1 fc=0 ppm=0 gain=0 maxmissed=51 ex=0 >>>>>>>>> receiveWindow=300 actChan=[0] maxChan=1 >>>>>>>>> 23:31:41.485224 undefined=false verbose=false disableAfc=false >>>>>>>>> deviceString=0 >>>>>>>>> 23:31:41.486233 BitRate: 19200 >>>>>>>>> 23:31:41.486286 SymbolLength: 14 >>>>>>>>> 23:31:41.486329 SampleRate: 268800 >>>>>>>>> 23:31:41.486366 Preamble: 1100101110001001 >>>>>>>>> 23:31:41.486403 PreambleSymbols: 16 >>>>>>>>> 23:31:41.486439 PreambleLength: 224 >>>>>>>>> 23:31:41.486479 PacketSymbols: 80 >>>>>>>>> 23:31:41.486517 PacketLength: 1120 >>>>>>>>> 23:31:41.486553 BlockSize: 512 >>>>>>>>> 23:31:41.486589 BufferLength: 2048 >>>>>>>>> Found Rafael Micro R820T tuner >>>>>>>>> 23:31:41.926203 Hop: {ChannelIdx:0 ChannelFreq:902419338 >>>>>>>>> FreqError:0 Transmitter:0} >>>>>>>>> Exact sample rate is: 268800.001367 Hz >>>>>>>>> 23:31:42.103009 GetTunerGain: 0 Db >>>>>>>>> 23:31:42.103037 SetFreqCorrection 0 ppm Successful >>>>>>>>> Allocating 1 zero-copy buffers >>>>>>>>> 23:31:42.106932 Init channels: wait max 135 seconds for a message >>>>>>>>> of each transmitter >>>>>>>>> 23:32:52.437316 TRANSMITTER 0 SEEN >>>>>>>>> 23:32:52.437491 Hop: {ChannelIdx:19 ChannelFreq:911952597 >>>>>>>>> FreqError:0 Transmitter:0} >>>>>>>>> 23:32:54.999338 600557FFC100B25F 2 0 0 0 0 msg.ID=0 >>>>>>>>> 23:32:54.999764 Hop: {ChannelIdx:41 ChannelFreq:922991108 >>>>>>>>> FreqError:0 Transmitter:0} >>>>>>>>> 23:32:57.561300 80055C206900FA0A 3 0 0 0 0 msg.ID=0 >>>>>>>>> 23:32:57.561605 Hop: {ChannelIdx:25 ChannelFreq:914963100 >>>>>>>>> FreqError:0 Transmitter:0} >>>>>>>>> 23:33:00.124869 E0045C800300563E 4 0 0 0 0 msg.ID=0 >>>>>>>>> 23:33:00.125445 Hop: {ChannelIdx:8 ChannelFreq:906433342 >>>>>>>>> FreqError:0 Transmitter:0} >>>>>>>>> 23:33:02.686749 500359FF73008A63 5 0 0 0 0 msg.ID=0 >>>>>>>>> 23:33:02.686858 Hop: {ChannelIdx:47 ChannelFreq:926001611 >>>>>>>>> FreqError:0 Transmitter:0} >>>>>>>>> 23:33:05.248703 400358FD0100E608 6 0 0 0 0 msg.ID=0 >>>>>>>>> 23:33:05.248811 Hop: {ChannelIdx:32 ChannelFreq:918475353 >>>>>>>>> FreqError:0 Transmitter:0} >>>>>>>>> 23:33:07.812769 800456205B005B07 7 0 0 0 0 msg.ID=0 >>>>>>>>> 23:33:07.812888 Hop: {ChannelIdx:13 ChannelFreq:908942094 >>>>>>>>> FreqError:0 Transmitter:0} >>>>>>>>> 23:33:10.374274 E00362800300BF59 8 0 0 0 0 msg.ID=0 >>>>>>>>> 23:33:10.374381 Hop: {ChannelIdx:36 ChannelFreq:920482355 >>>>>>>>> FreqError:0 Transmitter:0} >>>>>>>>> 23:33:12.936296 500458FF7100FD61 9 0 0 0 0 msg.ID=0 >>>>>>>>> >>>>>>>>> As you can see, it takes >60s to start parsing data. When I try to >>>>>>>>> run the weewx driver, it crashes after ~10s >>>>>>>>> >>>>>>>>> 23:19:53.355369 Init channels: wait max 135 seconds for a message >>>>>>>>> of each transmitter >>>>>>>>> Traceback (most recent call last): >>>>>>>>> File "/usr/share/weewx/user/rtldavis.py", line 1407, in <module> >>>>>>>>> payload = lines[0].strip() >>>>>>>>> IndexError: list index out of range >>>>>>>>> >>>>>>>>> Sometimes rtldavis is faster or slower, but rarely does it start >>>>>>>>> in <10s. From reading other comments, it sounds like the driver times >>>>>>>>> out >>>>>>>>> after 10s of no data here. >>>>>>>>> >>>>>>>>> Any ideas what might be happening here? The antenna that I have on >>>>>>>>> there is a cheap set of rabbit ears (dipole), could certainly get a >>>>>>>>> better >>>>>>>>> one, the station is about 80ft (25m) away on the roof of the next >>>>>>>>> building >>>>>>>>> over. Hardware is a raspberry pi and and an RTL-SDR blog brand R820T2 >>>>>>>>> RTL2832U SDR. Pi is running latest raspbian. >>>>>>>>> >>>>>>>>> Thank you for all your hard work, I am so close! >>>>>>>>> On Wednesday, May 8, 2019 at 1:37:45 AM UTC-7 [email protected] >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> uvedhe wrote on github : >>>>>>>>>>> >>>>>>>>>> I will answer this in the weewx-rtldavis topic in the >>>>>>>>>>> weewx-development forum. >>>>>>>>>>> Luc >>>>>>>>>>> >>>>>>>>>> uvedhe <https://github.com/uvedhe> commented 14 hours ago >>>>>>>>>>> <https://github.com/lheijst/weewx-rtldavis/issues/1#issue-441358316> >>>>>>>>>>> >>>>>>>>>> I can successfully run $GOPATH/bin/rtldavis which returns >>>>>>>>>>> various entries, like these: >>>>>>>>>>> >>>>>>>>>>> 19:10:43.856163 Init channels: wait max 17 seconds for a message of >>>>>>>>>>> each transmitter >>>>>>>>>>> 19:11:01.793521 Init channels: wait max 17 seconds for a message of >>>>>>>>>>> each transmitter >>>>>>>>>>> 19:11:01.794049 Hop: {ChannelIdx:0 ChannelFreq:868077250 >>>>>>>>>>> FreqError:0} >>>>>>>>>>> 19:11:19.732536 Init channels: wait max 17 seconds for a message of >>>>>>>>>>> each transmitter >>>>>>>>>>> 19:11:19.732580 Hop: {ChannelIdx:0 ChannelFreq:868077250 >>>>>>>>>>> FreqError:0} >>>>>>>>>>> >>>>>>>>>>> Hi uvedhe, >>>>>>>>>> >>>>>>>>>> The rtldavis log show you didn't receive any data. >>>>>>>>>> >>>>>>>>>> The rtldavis program use default the EU-frequencies. You use the >>>>>>>>>> EU version of the Davis Vantage, right? >>>>>>>>>> The program runs succesfully on a Raspberry PI, Not sure if it >>>>>>>>>> will run on OS X 10 too. >>>>>>>>>> >>>>>>>>>> You could try to run the rtldavis program with several other ppm >>>>>>>>>> settings to check if any data will b read like: >>>>>>>>>> $GOPATH/bin/rtldavis -ppm 3 >>>>>>>>>> or >>>>>>>>>> $GOPATH/bin/rtldavis -ppm -3 >>>>>>>>>> >>>>>>>>>> Luc >>>>>>>>>> >>>>>>>>> -- >>>>>>>> You received this message because you are subscribed to a topic in >>>>>>>> the Google Groups "weewx-development" group. >>>>>>>> To unsubscribe from this topic, visit >>>>>>>> https://groups.google.com/d/topic/weewx-development/jhGleLxu-p0/unsubscribe >>>>>>>> . >>>>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>>>> [email protected]. >>>>>>>> To view this discussion on the web visit >>>>>>>> https://groups.google.com/d/msgid/weewx-development/93e51a21-294a-4736-982a-83efabc4e03dn%40googlegroups.com >>>>>>>> >>>>>>>> <https://groups.google.com/d/msgid/weewx-development/93e51a21-294a-4736-982a-83efabc4e03dn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>> . >>>>>>>> >>>>>>> -- >>>>>> You received this message because you are subscribed to a topic in >>>>>> the Google Groups "weewx-development" group. >>>>>> To unsubscribe from this topic, visit >>>>>> https://groups.google.com/d/topic/weewx-development/jhGleLxu-p0/unsubscribe >>>>>> . >>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>> [email protected]. >>>>>> >>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/d/msgid/weewx-development/297b95f2-6904-4d9b-aced-dd52d6b2dd4an%40googlegroups.com >>>>>> >>>>>> <https://groups.google.com/d/msgid/weewx-development/297b95f2-6904-4d9b-aced-dd52d6b2dd4an%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>> . >>>>>> >>>>> -- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "weewx-development" group. >>>> To unsubscribe from this topic, visit >>>> https://groups.google.com/d/topic/weewx-development/jhGleLxu-p0/unsubscribe >>>> . >>>> To unsubscribe from this group and all its topics, send an email to >>>> [email protected]. >>>> >>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-development/dcd953a3-771f-4eb9-bf8b-f7ef50f08eb1n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-development/dcd953a3-771f-4eb9-bf8b-f7ef50f08eb1n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "weewx-development" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/weewx-development/jhGleLxu-p0/unsubscribe >> . >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-development/8abd1574-df46-41b2-9155-2a29bc3d4f1fn%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-development/8abd1574-df46-41b2-9155-2a29bc3d4f1fn%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-development" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-development/084e009c-65f9-4a3b-8c33-6c1f2fd7f9a1n%40googlegroups.com.
