On 14/08/16 18:54, mwall wrote:
On Sunday, August 14, 2016 at 11:33:13 AM UTC-4, Joep L. Blom wrote:
Finally I bit the bullet and bought a vatagePro2 with a data logger.
The sensors installed perfectly and the console works OK.
However, the logger is a different story. It is an USB logger but as
well with weewx as with the official software no signal can be seen.
weewx (running on a odroid-C) says: "engine: Loading station type
Vantage (weewx.drivers.vantage)
Aug 14 16:09:37 localhost weewx[4381]: engine: Unable to load
driver: No
module named serial
Aug 14 16:09:37 localhost weewx[4381]: **** Exiting...
Well, that can be but how to solve that.
you need to install python serial as spelled out in the pre-requisites
section of the weewx user/installation guides.
m
--
You received this message because you are subscribed to the Google
Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
For more options, visit https://groups.google.com/d/optout.
Matthew,
Thanks, I missed that in the manual. However, although that gives me a
better result nevertheless no luck. Now I have no idea how the serial
port is chosen. When I installed the driver as serial in the ,conf file
comes ttyS0. However when I test it either with "screen" or "minicom" I
don't see any data returned. However when I connect the logger to a
WIndows laptop with the weather software testing communications port it
says "Vantage Pro Station was found" and it works. So where can be the
problem with weewx??
Joep
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
