OK, running in foreground gives:
pi@raspberrypi:~ $ sudo weewxd /etc/weewx/weewx.conf
Traceback (most recent call last):
File "/usr/bin/weewxd", line 64, in <module>
weewx.engine.main(options, args)
File "/usr/share/weewx/weewx/engine.py", line 853, in main
engine = EngineClass(config_dict)
File "/usr/share/weewx/weewx/engine.py", line 69, in __init__
self.setupStation(config_dict)
File "/usr/share/weewx/weewx/engine.py", line 87, in setupStation
driver = config_dict[stationType]['driver']
File "/usr/lib/python2.7/dist-packages/configobj.py", line 554, in
__getitem__
val = dict.__getitem__(self, key)
KeyError: 'AcuRite 02064C'
System Log then says:
sudo tail -f /var/log/syslog
Oct 3 19:42:53 raspberrypi weewx[8114]: **** engine =
EngineClass(config_dict)
Oct 3 19:42:53 raspberrypi weewx[8114]: **** File
"/usr/share/weewx/weewx/engine.py", line 69, in __init__
Oct 3 19:42:53 raspberrypi weewx[8114]: ****
self.setupStation(config_dict)
Oct 3 19:42:53 raspberrypi weewx[8114]: **** File
"/usr/share/weewx/weewx/engine.py", line 87, in setupStation
Oct 3 19:42:53 raspberrypi weewx[8114]: **** driver =
config_dict[stationType]['driver']
Oct 3 19:42:53 raspberrypi weewx[8114]: **** File
"/usr/lib/python2.7/dist-packages/configobj.py", line 554, in __getitem__
Oct 3 19:42:53 raspberrypi weewx[8114]: **** val =
dict.__getitem__(self, key)
Oct 3 19:42:53 raspberrypi weewx[8114]: **** KeyError: 'AcuRite
02064C'
Oct 3 19:42:53 raspberrypi weewx[8114]: **** Exiting.
Oct 3 19:44:02 raspberrypi wpa_supplicant[461]: wlan0: WPA: Group rekeying
completed with 20:c9:d0:24:c8:35 [GTK=CCMP]
As to the install, I used PiBakery, which I believe uses the full Rapbian
install. I then downloaded the .deb install file from the weewx site and
ran it from the graphical interface. Since the config tool didn't run, I
edited it with nano to add my parameters. Restarted, tried to run it
manually, and in checking for the HTML output it couldn't find any HTML
generated.
Only thing I found confusing, which loking at the log above may be an
issue, is that the instructions ask for a driver and model for AcuRites
(see below), but don't give a clear idea of the syntax to add the model. I
added it on one line, which seems in line with other config instructions,
since there is not a seperate variable for "model".
[AcuRite]
This section is for options relating to the AcuRite 5-in-1 series of
weather stations with USB connectors.
model
Set to the station model. For example, "AcuRite 01035", "AcuRite 01036", or
"02032C"
Thanks again, and virtual beers, to all of you!
--Bob
On Sunday, October 2, 2016 at 2:50:03 PM UTC-5, Bob Breck wrote:
>
> New installation on a clear Raspberian install; configured for an AcuRite
> 02064C. When I run, i get this in the log file (over and over again), and
> no results in the weewx HTML file.
>
> Oct 2 14:17:01 raspberrypi rsyslogd-2007: action 'action 17' suspended,
> next retry is Sun Oct 2 14:17:31 2016 [try http://www.rsyslog.com/e/2007
> ]
> Oct 2 14:17:01 raspberrypi CRON[1511]: (root) CMD ( cd / && run-parts
> --report /etc/cron.hourly)
> Oct 2 14:34:08 raspberrypi vncserver-x11[498]: Connections: connected:
> 10.0.1.35::50737
>
> Any help much appreciated!
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
