Hi,
So what do you have in weewx.conf? Looking at the User's Manual under The
configuration file weewx.conf
<http://weewx.com/docs/usersguide.htm#weewxconf> you should have (amongst
other things) something like:
[Station]
station_type = AcuRite
[AcuRite]
model = 2064C
Reading the acurite code it seems the model setting is optional, it merely
returns '2064C' to anything that asks for the model number.
Gary
On Tuesday, 4 October 2016 10:57:49 UTC+10, Bob Breck wrote:
>
> OK, running in foreground gives:
> pi@raspberrypi:~ $ sudo weewxd /etc/weewx/weewx.conf
> Traceback (most recent call last):
> File "/usr/bin/weewxd", line 64, in <module>
> weewx.engine.main(options, args)
> File "/usr/share/weewx/weewx/engine.py", line 853, in main
> engine = EngineClass(config_dict)
> File "/usr/share/weewx/weewx/engine.py", line 69, in __init__
> self.setupStation(config_dict)
> File "/usr/share/weewx/weewx/engine.py", line 87, in setupStation
> driver = config_dict[stationType]['driver']
> File "/usr/lib/python2.7/dist-packages/configobj.py", line 554, in
> __getitem__
> val = dict.__getitem__(self, key)
> KeyError: 'AcuRite 02064C'
>
> System Log then says:
> sudo tail -f /var/log/syslog
> Oct 3 19:42:53 raspberrypi weewx[8114]: **** engine =
> EngineClass(config_dict)
> Oct 3 19:42:53 raspberrypi weewx[8114]: **** File
> "/usr/share/weewx/weewx/engine.py", line 69, in __init__
> Oct 3 19:42:53 raspberrypi weewx[8114]: ****
> self.setupStation(config_dict)
> Oct 3 19:42:53 raspberrypi weewx[8114]: **** File
> "/usr/share/weewx/weewx/engine.py", line 87, in setupStation
> Oct 3 19:42:53 raspberrypi weewx[8114]: **** driver =
> config_dict[stationType]['driver']
> Oct 3 19:42:53 raspberrypi weewx[8114]: **** File
> "/usr/lib/python2.7/dist-packages/configobj.py", line 554, in __getitem__
> Oct 3 19:42:53 raspberrypi weewx[8114]: **** val =
> dict.__getitem__(self, key)
> Oct 3 19:42:53 raspberrypi weewx[8114]: **** KeyError: 'AcuRite
> 02064C'
> Oct 3 19:42:53 raspberrypi weewx[8114]: **** Exiting.
> Oct 3 19:44:02 raspberrypi wpa_supplicant[461]: wlan0: WPA: Group
> rekeying completed with 20:c9:d0:24:c8:35 [GTK=CCMP]
>
> As to the install, I used PiBakery, which I believe uses the full Rapbian
> install. I then downloaded the .deb install file from the weewx site and
> ran it from the graphical interface. Since the config tool didn't run, I
> edited it with nano to add my parameters. Restarted, tried to run it
> manually, and in checking for the HTML output it couldn't find any HTML
> generated.
>
> Only thing I found confusing, which loking at the log above may be an
> issue, is that the instructions ask for a driver and model for AcuRites
> (see below), but don't give a clear idea of the syntax to add the model. I
> added it on one line, which seems in line with other config instructions,
> since there is not a seperate variable for "model".
>
> [AcuRite]
>
> This section is for options relating to the AcuRite 5-in-1 series of
> weather stations with USB connectors.
>
> model
>
> Set to the station model. For example, "AcuRite 01035", "AcuRite 01036",
> or "02032C"
>
>
>
> Thanks again, and virtual beers, to all of you!
>
>
> --Bob
>
> On Sunday, October 2, 2016 at 2:50:03 PM UTC-5, Bob Breck wrote:
>>
>> New installation on a clear Raspberian install; configured for an AcuRite
>> 02064C. When I run, i get this in the log file (over and over again), and
>> no results in the weewx HTML file.
>>
>> Oct 2 14:17:01 raspberrypi rsyslogd-2007: action 'action 17' suspended,
>> next retry is Sun Oct 2 14:17:31 2016 [try http://www.rsyslog.com/e/2007
>> ]
>> Oct 2 14:17:01 raspberrypi CRON[1511]: (root) CMD ( cd / && run-parts
>> --report /etc/cron.hourly)
>> Oct 2 14:34:08 raspberrypi vncserver-x11[498]: Connections: connected:
>> 10.0.1.35::50737
>>
>> Any help much appreciated!
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
