You want
station_type = AcuRite
not
station_type = AcuRite 02064C
Make the change, save weewx.conf then stop/start weewx. As I said the model
= 2064C appears optional. You can add:
[AcuRite]
model = 2064C
to weewx.conf if you want.
Gary
On Tuesday, 4 October 2016 11:41:04 UTC+10, Bob Breck wrote:
>
> My weewx.conf file does not have a model variable:
>
> # Set to type of station hardware. There must be a corresponding stanza
> # in this file with a 'driver' parameter indicating the driver to be
> used.
> station_type = AcuRite 02064C
>
> and that's it. There isn't a separate section for driver-specific
> information, either.
>
> I'm attaching the whole conf file (it's got a .txt extention in this copy,
> but not in the actual file).
>
> Thanks again.
>
> On Monday, October 3, 2016 at 8:22:08 PM UTC-5, gjr80 wrote:
>>
>> Hi,
>>
>> So what do you have in weewx.conf? Looking at the User's Manual under The
>> configuration file weewx.conf
>> <http://weewx.com/docs/usersguide.htm#weewxconf> you should have
>> (amongst other things) something like:
>>
>> [Station]
>> station_type = AcuRite
>>
>> [AcuRite]
>> model = 2064C
>>
>> Reading the acurite code it seems the model setting is optional, it
>> merely returns '2064C' to anything that asks for the model number.
>>
>> Gary
>>
>> On Tuesday, 4 October 2016 10:57:49 UTC+10, Bob Breck wrote:
>>>
>>> OK, running in foreground gives:
>>> pi@raspberrypi:~ $ sudo weewxd /etc/weewx/weewx.conf
>>> Traceback (most recent call last):
>>> File "/usr/bin/weewxd", line 64, in <module>
>>> weewx.engine.main(options, args)
>>> File "/usr/share/weewx/weewx/engine.py", line 853, in main
>>> engine = EngineClass(config_dict)
>>> File "/usr/share/weewx/weewx/engine.py", line 69, in __init__
>>> self.setupStation(config_dict)
>>> File "/usr/share/weewx/weewx/engine.py", line 87, in setupStation
>>> driver = config_dict[stationType]['driver']
>>> File "/usr/lib/python2.7/dist-packages/configobj.py", line 554, in
>>> __getitem__
>>> val = dict.__getitem__(self, key)
>>> KeyError: 'AcuRite 02064C'
>>>
>>> System Log then says:
>>> sudo tail -f /var/log/syslog
>>> Oct 3 19:42:53 raspberrypi weewx[8114]: **** engine =
>>> EngineClass(config_dict)
>>> Oct 3 19:42:53 raspberrypi weewx[8114]: **** File
>>> "/usr/share/weewx/weewx/engine.py", line 69, in __init__
>>> Oct 3 19:42:53 raspberrypi weewx[8114]: ****
>>> self.setupStation(config_dict)
>>> Oct 3 19:42:53 raspberrypi weewx[8114]: **** File
>>> "/usr/share/weewx/weewx/engine.py", line 87, in setupStation
>>> Oct 3 19:42:53 raspberrypi weewx[8114]: **** driver =
>>> config_dict[stationType]['driver']
>>> Oct 3 19:42:53 raspberrypi weewx[8114]: **** File
>>> "/usr/lib/python2.7/dist-packages/configobj.py", line 554, in __getitem__
>>> Oct 3 19:42:53 raspberrypi weewx[8114]: **** val =
>>> dict.__getitem__(self, key)
>>> Oct 3 19:42:53 raspberrypi weewx[8114]: **** KeyError: 'AcuRite
>>> 02064C'
>>> Oct 3 19:42:53 raspberrypi weewx[8114]: **** Exiting.
>>> Oct 3 19:44:02 raspberrypi wpa_supplicant[461]: wlan0: WPA: Group
>>> rekeying completed with 20:c9:d0:24:c8:35 [GTK=CCMP]
>>>
>>> As to the install, I used PiBakery, which I believe uses the full
>>> Rapbian install. I then downloaded the .deb install file from the weewx
>>> site and ran it from the graphical interface. Since the config tool didn't
>>> run, I edited it with nano to add my parameters. Restarted, tried to run it
>>> manually, and in checking for the HTML output it couldn't find any HTML
>>> generated.
>>>
>>> Only thing I found confusing, which loking at the log above may be an
>>> issue, is that the instructions ask for a driver and model for AcuRites
>>> (see below), but don't give a clear idea of the syntax to add the model. I
>>> added it on one line, which seems in line with other config instructions,
>>> since there is not a seperate variable for "model".
>>>
>>> [AcuRite]
>>>
>>> This section is for options relating to the AcuRite 5-in-1 series of
>>> weather stations with USB connectors.
>>>
>>> model
>>>
>>> Set to the station model. For example, "AcuRite 01035", "AcuRite 01036",
>>> or "02032C"
>>>
>>>
>>>
>>> Thanks again, and virtual beers, to all of you!
>>>
>>>
>>> --Bob
>>>
>>> On Sunday, October 2, 2016 at 2:50:03 PM UTC-5, Bob Breck wrote:
>>>>
>>>> New installation on a clear Raspberian install; configured for an
>>>> AcuRite 02064C. When I run, i get this in the log file (over and over
>>>> again), and no results in the weewx HTML file.
>>>>
>>>> Oct 2 14:17:01 raspberrypi rsyslogd-2007: action 'action 17'
>>>> suspended, next retry is Sun Oct 2 14:17:31 2016 [try
>>>> http://www.rsyslog.com/e/2007 ]
>>>> Oct 2 14:17:01 raspberrypi CRON[1511]: (root) CMD ( cd / &&
>>>> run-parts --report /etc/cron.hourly)
>>>> Oct 2 14:34:08 raspberrypi vncserver-x11[498]: Connections: connected:
>>>> 10.0.1.35::50737
>>>>
>>>> Any help much appreciated!
>>>>
>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
