Hello folks, I am running a WH3081 branded as Excelvan (http://www.excelvan.com/product-g_64.html) and weewx stops reading data from it after some days. The last time I ran into this I had to remove the USB cable and the batteries from the WS console to have weewx reading again.
I havent measured the previous interval, but last time it happened it took 15 days, 7 hours, 3 minutes (22,023 minutes or 367) to stop working again. In the log files, even with debug on, I see no clue: Oct 11 15:05:05 sensors weewx[16711]: engine: retrying... Oct 11 15:05:05 sensors weewx[16711]: engine: Using configuration file /etc/weewx/weewx.conf Oct 11 15:05:05 sensors weewx[16711]: engine: Loading station type FineOffsetUSB (weewx.drivers.fousb) Oct 11 15:05:05 sensors weewx[16711]: fousb: driver version is 1.8 Oct 11 15:05:05 sensors weewx[16711]: fousb: polling mode is PERIODIC Oct 11 15:05:05 sensors weewx[16711]: fousb: polling interval is 60 Oct 11 15:05:05 sensors weewx[16711]: fousb: found station on USB bus= device= Oct 11 15:05:05 sensors weewx[16711]: engine: StdConvert target unit is 0x10 Oct 11 15:05:05 sensors weewx[16711]: wxcalculate: The following values will be calculated: barometer=prefer_hardware,windchill=prefer_hardware,dewpoint=prefer_hardware,appTemp=prefer_hardware,rainRate=prefer_hardware,windrun=prefer_hardware,heatindex=prefer_hardware,maxSolarRad=prefer_hardware,humidex=prefer_hardware,pressure=prefer_hardware,inDewpoint=prefer_hardware,ET=prefer_hardware,altimeter=prefer_hardware,cloudbase=prefer_hardware Oct 11 15:05:05 sensors weewx[16711]: wxcalculate: The following algorithms will be used for calculations: altimeter=aaNOAA,maxSolarRad=RS Oct 11 15:05:05 sensors weewx[16711]: engine: Archive will use data binding wx_binding Oct 11 15:05:05 sensors weewx[16711]: engine: Record generation will be attempted in 'software' Oct 11 15:05:52 sensors kernel: [1585840.453489] w1_master_driver w1_bus_master1: Family 0 for 00.96fe00000000.89 is not registered. Oct 11 15:06:50 sensors weewx[16711]: engine: retrying... Oct 11 15:06:51 sensors weewx[16711]: engine: Using configuration file /etc/weewx/weewx.conf Oct 11 15:06:51 sensors weewx[16711]: engine: Loading station type FineOffsetUSB (weewx.drivers.fousb) Oct 11 15:06:51 sensors weewx[16711]: fousb: driver version is 1.8 Oct 11 15:06:51 sensors weewx[16711]: fousb: polling mode is PERIODIC Oct 11 15:06:51 sensors weewx[16711]: fousb: polling interval is 60 Oct 11 15:06:51 sensors weewx[16711]: fousb: found station on USB bus= device= Oct 11 15:06:51 sensors weewx[16711]: engine: StdConvert target unit is 0x10 Oct 11 15:06:51 sensors weewx[16711]: wxcalculate: The following values will be calculated: barometer=prefer_hardware,windchill=prefer_hardware,dewpoint=prefer_hardware,appTemp=prefer_hardware,rainRate=prefer_hardware,windrun=prefer_hardware,heatindex=prefer_hardware,maxSolarRad=prefer_hardware,humidex=prefer_hardware,pressure=prefer_hardware,inDewpoint=prefer_hardware,ET=prefer_hardware,altimeter=prefer_hardware,cloudbase=prefer_hardware Oct 11 15:06:51 sensors weewx[16711]: wxcalculate: The following algorithms will be used for calculations: altimeter=aaNOAA,maxSolarRad=RS Oct 11 15:06:51 sensors weewx[16711]: engine: Archive will use data binding wx_binding Oct 11 15:06:51 sensors weewx[16711]: engine: Record generation will be attempted in 'software' Oct 11 15:06:52 sensors kernel: [1585899.765691] w1_master_driver w1_bus_master1: Family 0 for 00.56fe00000000.43 is not registered. Oct 11 15:07:41 sensors kernel: [1585949.046332] w1_master_driver w1_bus_master1: Family 0 for 00.d6fe00000000.cf is not registered. Oct 11 15:08:04 sensors kernel: [1585972.507255] w1_master_driver w1_bus_master1: Family 0 for 00.36fe00000000.26 is not registered. Any help is appreciated. Thanks! -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
