after installing rtl-sdr and rtl_433, the command, 'rtl_433 -U -q' produced
no output. After some troubleshooting noticed that the acurite 5 in 1 (and
other devices) are disabled in the rtl_433 driver.
[09]* Acurite 5n1 Weather Station
* Disabled by default, use -R n or -G
So adding -G to line 75 and line 692 of sdr.py gets output when running the
driver from the command line.
root@chip:/home/weewx# PYTHONPATH=bin python bin/user/sdr.py --debug
out: ['2016-10-23 02:52:40 Acurite 5n1 sensor 0x0D97 Ch A, Msg 38, Wind 0
kmph / 0.0 mph, 16.4 C 61.5 F 78 % RH\n']
parsed: {'wind_speed.0D97.Acurite5n1Packet': 0.0,
'wind_speed_mph.0D97.Acurite5n1Packet': 0.0, 'dateTime': 1477191160,
'temperature_F.0D97.Acurite5n1Packet': 61.5,
'humidity.0D97.Acurite5n1Packet': 78.0, 'temperature.0D97.Acurite5n1Packet':
16.4, 'usUnits': 16}
out: ['2016-10-23 02:52:40 Acurite 5n1 sensor 0x0D97 Ch A, Msg 38, Wind 0
kmph / 0.0 mph, 16.4 C 61.5 F 78 % RH\n']
parsed: {'wind_speed.0D97.Acurite5n1Packet': 0.0,
'wind_speed_mph.0D97.Acurite5n1Packet': 0.0, 'dateTime': 1477191160,
'temperature_F.0D97.Acurite5n1Packet': 61.5,
'humidity.0D97.Acurite5n1Packet': 78.0, 'temperature.0D97.Acurite5n1Packet':
16.4, 'usUnits': 16}
starting weewx just gives unparsed messages.
Oct 22 20:40:00 chip weewx[1327]: sdr: MainThread: lines=[]
Oct 22 20:40:00 chip weewx[1327]: sdr: MainThread: unparsed: []
Oct 22 20:40:03 chip weewx[1327]: sdr: MainThread: lines=[]
Oct 22 20:40:03 chip weewx[1327]: sdr: MainThread: unparsed: []
Oct 22 20:40:06 chip weewx[1327]: sdr: MainThread: lines=[]
Oct 22 20:40:06 chip weewx[1327]: sdr: MainThread: unparsed: []
Oct 22 20:40:09 chip weewx[1327]: sdr: MainThread: lines=[]
Oct 22 20:40:09 chip weewx[1327]: sdr: MainThread: unparsed: []
Andy
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2015 Tom Keffer <[email protected]>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 1
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /home/weewx
# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20
# Do not modify this. It is used when installing and updating weewx.
version = 3.6.0
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = Chip CMON Test
# Latitude and longitude in decimal degrees
latitude = 38
longitude = 121
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 112, foot # Choose 'foot' or 'meter' for unit
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be used.
station_type = SDR
# If you have a website, you may specify an URL
#station_url = http://www.example.com
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 6
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
[[StationRegistry]]
# To register this weather station with weewx, set this to true
register_this_station = false
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to do this, set the option 'enable' to true,
# and specify a username and password.
enable = false
username = replace_me
password = replace_me
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = false
station = replace_me
# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
#passcode = replace_me (APRS stations only)
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
enable = false
station = replace_me
password = replace_me
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
enable = false
station = replace_me
password = replace_me
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
enable = false
station = replace_me
password = replace_me
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = public_html
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Each of the following subsections defines a report that will be run.
[[StandardReport]]
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.
# The StandardReport uses the 'Standard' skin, which contains the
# images, templates and plots for the report.
skin = Standard
[[[Units]]]
[[[[Groups]]]]
group_altitude = foot
group_speed2 = mile_per_hour2
group_pressure = inHg
group_rain = inch
group_rainrate = inch_per_hour
group_temperature = degree_F
group_degree_day = degree_F_day
group_speed = mile_per_hour
[[cmon]]
HTML_ROOT = public_html/cmon
skin = cmon
[[FTP]]
# FTP'ing the results to a webserver is treated as just another report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, uncomment and fill out the next four lines.
#user = replace with the ftp username
#password = replace with the ftp password
#server = replace with the ftp server name, e.g, www.threefools.org
#path = replace with the ftp destination directory (e.g., /weather)
# Set to True for a secure FTP (SFTP) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = public_html
# Most FTP servers use port 21
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh using
# public/private key authentication from the user account that weewx
# runs as to the user account on the remote machine where the files
# will be copied.
#
# The following three lines determine where files will be sent.
#server = replace with the rsync server name, e.g, www.threefools.org
#path = replace with the rsync destination directory (e.g., /weather)
#user = replace with the rsync username
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote file
# deletion, zero to allow files to accumulate remotely.
delete = 1
server = xxxxx
path = xxxxx
user = xxxxx
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 26, 32.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
pressure = 24, 34.5, inHg
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# Derived quantities are calculated by this service. Possible values
are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
barometer = prefer_hardware
altimeter = prefer_hardware
windchill = prefer_hardware
heatindex = prefer_hardware
dewpoint = prefer_hardware
inDewpoint = prefer_hardware
rainRate = prefer_hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive interval
# will be downloaded from the station. Otherwise, specify it (in seconds).
archive_interval = 60
# How long to wait (in seconds) before processing new archive data. Must
# be greater than zero.
archive_delay = 15
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = hardware
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# The data binding used to save archive records
data_binding = wx_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_sqlite
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.wxmanager.WXDaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview.schema
[[cmon_binding]]
manager = weewx.manager.DaySummaryManager
schema = user.cmon.schema
table_name = archive
database = cmon_sqlite
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
[[archive_sqlite]]
database_type = SQLite
database_name = weewx.sdb
# MySQL
[[archive_mysql]]
database_type = MySQL
database_name = weewx
[[cmon_sqlite]]
database_name = cmon.sdb
database_type = SQLite
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = %(WEEWX_ROOT)s/archive
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user = weewx
# The password for the user name
password = weewx
##############################################################################
# This section configures the internal weewx engine.
[Engine]
[[Services]]
# This section specifies the services that should be run. They are
# grouped by type, and the order of services within each group
# determines the order in which the services will be run.
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate,
weewx.engine.StdQC, weewx.wxservices.StdWXCalculate, user.cmon.ComputerMonitor
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry,
weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP,
weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
##############################################################################
[SDR]
# This section is for the software-defined radio driver.
cmd = /usr/local/bin/rtl_433
# The driver to use
driver = user.sdr
log_unknown_sensors = True
log_unmapped_sensors = True
[[sensor_map]]
wind_dir.0D97.Acurite5n1Packet = windDir
wind_speed.0D97.Acurite5n1Packet = windSpeed
temperature.0D97.Acurite5n1Packet = outTemp
humidity.0D97.Acurite5n1Packet = outHumidity
# temperature.24A4.AcuriteTowerPacket = inTemp
# humidity.24A4.AcuriteTowerPacket = inHumidity
##############################################################################
# Options for extension 'cmon'
[ComputerMonitor]
data_binding = cmon_binding
hardware = chip, apcups
Oct 22 20:19:23 chip systemd[1]: Starting LSB: weewx weather system...
Oct 22 20:19:24 chip weewx[1323]: engine: Initializing weewx version 3.6.0
Oct 22 20:19:24 chip weewx[1323]: engine: Using Python 2.7.9 (default, Aug 13
2016, 17:56:53) #012[GCC 4.9.2]
Oct 22 20:19:24 chip weewx[1323]: engine: Platform
Linux-4.3.0-ntc-armv7l-with-debian-8.6
Oct 22 20:19:24 chip weewx[1323]: engine: pid file is /var/run/weewx.pid
Oct 22 20:19:24 chip weewx[1312]: Starting weewx weather system: weewx.
Oct 22 20:19:24 chip systemd[1]: Started LSB: weewx weather system.
Oct 22 20:19:24 chip weewx[1327]: engine: Using configuration file
/home/weewx/weewx.conf
Oct 22 20:19:24 chip weewx[1327]: engine: Initializing engine
Oct 22 20:19:24 chip weewx[1327]: engine: Loading station type SDR (user.sdr)
Oct 22 20:19:24 chip weewx[1327]: sdr: MainThread: driver version is 0.9
Oct 22 20:19:24 chip weewx[1327]: sdr: MainThread: sensor map is
{'wind_dir.0D97.Acurite5n1Packet': 'windDir',
'wind_speed.0D97.Acurite5n1Packet': 'windSpeed',
'temperature.0D97.Acurite5n1Packet': 'outTemp',
'humidity.0D97.Acurite5n1Packet': 'outHumidity'}
Oct 22 20:19:24 chip weewx[1327]: sdr: MainThread: deltas is {'rain':
'rain_total'}
Oct 22 20:19:24 chip weewx[1327]: sdr: MainThread: startup process
'/usr/local/bin/rtl_433'
Oct 22 20:19:24 chip weewx[1327]: engine: Loading service
weewx.engine.StdTimeSynch
Oct 22 20:19:24 chip weewx[1327]: engine: Finished loading service
weewx.engine.StdTimeSynch
Oct 22 20:19:24 chip weewx[1327]: engine: Loading service
weewx.engine.StdConvert
Oct 22 20:19:24 chip weewx[1327]: engine: StdConvert target unit is 0x1
Oct 22 20:19:24 chip weewx[1327]: engine: Finished loading service
weewx.engine.StdConvert
Oct 22 20:19:24 chip weewx[1327]: engine: Loading service
weewx.engine.StdCalibrate
Oct 22 20:19:24 chip weewx[1327]: engine: Finished loading service
weewx.engine.StdCalibrate
Oct 22 20:19:24 chip weewx[1327]: engine: Loading service weewx.engine.StdQC
Oct 22 20:19:24 chip weewx[1327]: engine: Finished loading service
weewx.engine.StdQC
Oct 22 20:19:24 chip weewx[1327]: engine: Loading service
weewx.wxservices.StdWXCalculate
Oct 22 20:19:24 chip weewx[1327]: wxcalculate: The following values will be
calculated: barometer=prefer_hardware, windchill=prefer_hardware,
dewpoint=prefer_hardware, appTemp=prefer_hardware, rainRate=prefer_hardware,
windrun=prefer_hardware, heatindex=prefer_hardware,
maxSolarRad=prefer_hardware, humidex=prefer_hardware, pressure=prefer_hardware,
inDewpoint=prefer_hardware, ET=prefer_hardware, altimeter=prefer_hardware,
cloudbase=prefer_hardware
Oct 22 20:19:24 chip weewx[1327]: wxcalculate: The following algorithms will be
used for calculations: altimeter=aaNOAA, maxSolarRad=RS
Oct 22 20:19:24 chip weewx[1327]: engine: Finished loading service
weewx.wxservices.StdWXCalculate
Oct 22 20:19:24 chip weewx[1327]: engine: Loading service
user.cmon.ComputerMonitor
Oct 22 20:19:24 chip weewx[1327]: cmon: service version is 0.14
Oct 22 20:19:24 chip weewx[1327]: cmon: sysinfo: Linux chip 4.3.0-ntc #1 SMP
Fri Feb 19 09:37:25 PST 2016 armv7l
Oct 22 20:19:24 chip weewx[1327]: cmon: cpuinfo: CPU implementer: 0x41
Oct 22 20:19:24 chip weewx[1327]: cmon: cpuinfo: Features: half thumb fastmult
vfp edsp neon vfpv3 tls vfpd32
Oct 22 20:19:24 chip weewx[1327]: cmon: cpuinfo: CPU architecture: 7
Oct 22 20:19:24 chip weewx[1327]: cmon: cpuinfo: BogoMIPS: 1001.88
Oct 22 20:19:24 chip weewx[1327]: cmon: cpuinfo: Hardware: Allwinner
sun4i/sun5i Families
Oct 22 20:19:24 chip weewx[1327]: cmon: cpuinfo: CPU revision: 2
Oct 22 20:19:24 chip weewx[1327]: cmon: cpuinfo: CPU part: 0xc08
Oct 22 20:19:24 chip weewx[1327]: cmon: cpuinfo: model name: ARMv7 Processor
rev 2 (v7l)
Oct 22 20:19:24 chip weewx[1327]: cmon: cpuinfo: Serial: 1625425508c27555
Oct 22 20:19:24 chip weewx[1327]: cmon: cpuinfo: processor: 0
Oct 22 20:19:24 chip weewx[1327]: cmon: cpuinfo: CPU variant: 0x3
Oct 22 20:19:24 chip weewx[1327]: cmon: cpuinfo: Revision: 0000
Oct 22 20:19:24 chip weewx[1327]: engine: Finished loading service
user.cmon.ComputerMonitor
Oct 22 20:19:24 chip weewx[1327]: engine: Loading service
weewx.engine.StdArchive
Oct 22 20:19:24 chip weewx[1327]: engine: Archive will use data binding
wx_binding
Oct 22 20:19:24 chip weewx[1327]: engine: Record generation will be attempted
in 'hardware'
Oct 22 20:19:24 chip weewx[1327]: engine: Using archive interval of 60 seconds
(specified in weewx configuration)
Oct 22 20:19:24 chip weewx[1327]: engine: Use LOOP data in hi/low calculations:
1
Oct 22 20:19:24 chip weewx[1327]: engine: Using binding 'wx_binding' to
database 'weewx.sdb'
Oct 22 20:19:24 chip weewx[1327]: manager: Starting backfill of daily summaries
Oct 22 20:19:24 chip weewx[1327]: manager: Daily summaries up to date
Oct 22 20:19:24 chip weewx[1327]: engine: Finished loading service
weewx.engine.StdArchive
Oct 22 20:19:24 chip weewx[1327]: engine: Loading service
weewx.restx.StdStationRegistry
Oct 22 20:19:25 chip weewx[1327]: restx: StationRegistry: Registration not
requested.
Oct 22 20:19:25 chip weewx[1327]: engine: Finished loading service
weewx.restx.StdStationRegistry
Oct 22 20:19:25 chip weewx[1327]: engine: Loading service
weewx.restx.StdWunderground
Oct 22 20:19:25 chip weewx[1327]: restx: Wunderground: Posting not enabled.
Oct 22 20:19:25 chip weewx[1327]: engine: Finished loading service
weewx.restx.StdWunderground
Oct 22 20:19:25 chip weewx[1327]: engine: Loading service
weewx.restx.StdPWSweather
Oct 22 20:19:25 chip weewx[1327]: restx: PWSweather: Posting not enabled.
Oct 22 20:19:25 chip weewx[1327]: engine: Finished loading service
weewx.restx.StdPWSweather
Oct 22 20:19:25 chip weewx[1327]: engine: Loading service weewx.restx.StdCWOP
Oct 22 20:19:25 chip weewx[1327]: restx: CWOP: Posting not enabled.
Oct 22 20:19:25 chip weewx[1327]: engine: Finished loading service
weewx.restx.StdCWOP
Oct 22 20:19:25 chip weewx[1327]: engine: Loading service weewx.restx.StdWOW
Oct 22 20:19:25 chip weewx[1327]: restx: WOW: Posting not enabled.
Oct 22 20:19:25 chip weewx[1327]: engine: Finished loading service
weewx.restx.StdWOW
Oct 22 20:19:25 chip weewx[1327]: engine: Loading service weewx.restx.StdAWEKAS
Oct 22 20:19:25 chip weewx[1327]: restx: AWEKAS: Posting not enabled.
Oct 22 20:19:25 chip weewx[1327]: engine: Finished loading service
weewx.restx.StdAWEKAS
Oct 22 20:19:25 chip weewx[1327]: engine: Loading service weewx.engine.StdPrint
Oct 22 20:19:25 chip weewx[1327]: engine: Finished loading service
weewx.engine.StdPrint
Oct 22 20:19:25 chip weewx[1327]: engine: Loading service weewx.engine.StdReport
Oct 22 20:19:25 chip weewx[1327]: engine: Finished loading service
weewx.engine.StdReport
Oct 22 20:19:25 chip weewx[1327]: engine: Starting up weewx version 3.6.0
Oct 22 20:19:25 chip weewx[1327]: engine: Station does not support reading the
time
Oct 22 20:19:25 chip weewx[1327]: engine: Starting main packet loop.
Oct 22 20:19:28 chip weewx[1327]: sdr: MainThread: lines=[]
Oct 22 20:19:28 chip weewx[1327]: sdr: MainThread: unparsed: []
Oct 22 20:19:31 chip weewx[1327]: sdr: MainThread: lines=[]
Oct 22 20:19:31 chip weewx[1327]: sdr: MainThread: unparsed: []
Oct 22 20:19:34 chip weewx[1327]: sdr: MainThread: lines=[]
Oct 22 20:19:34 chip weewx[1327]: sdr: MainThread: unparsed: []
