Hi Alberto, OK - the comms errors would make sense to explain that.
If you are planning to erase and start again then a bottle of water helps speed up the rainfall. Or lift the raingauge top off and tip the rain buckets to and fro. That way you can even count how much "rain" you have had. Don't worry about packet capture - I intend to do that myself when I have a bit of spare time. Given Oregon's approach to control of the setup via PC (i.e. there is none), I doubt there will be any software reset. They do not even correct the clock. Cameron On 21-Dec-2016 18:59, Alberto Sánchez wrote: > Hi Cameron,____ > > __ __ > > I have had erroneous rain readings (9000mm or even more), I think due to > communication failures and in some cases I found cobwebs in the rain > gauge. Because of this I think I have reached the limit. At the moment I > am in tests, as soon as the weather station works correctly I will erase > all the data of wunderground and I will start again. The anticyclone we > have in Europe does not help me to speed up the tests xD____ > > __ __ > > Many thanks to all for the help.____ > > __ __ > > Mwall,____ > > __ __ > > At the moment I do not have enough knowledge to help you capture > packages for the driver, but if you need me to do some test you can ask me. > > > El 21 dic. 2016 9:19, "Cameron D" <[email protected] > <mailto:[email protected]>> escribió: > > Hi Alberto, > I have just checked my system after some rain and the database contents > look sensible. I can see rain increments of 0.01 and 0.02 (inches) in > my 1-minute sample interval. > > The web page shows total rain as 6.6mm since midnight, which agrees with > the console. > > I am using Weewx 3.6.2, but with my test drivers. However I do not think > I changed anything in the drivers related to interpreting the data. > > I noticed also on your weather underground page that you recorded 191mm > in 5 minutes on 12-Dec. That does not look right - you should see if the > weewx database shows the same set of values. > > I thought the rain accumulator capacity was 40 metres of rain - that > should last 4 years even for the wettest place on earth. Unless you have > been supplying an extra source of water it should not need clearing just > yet. It will be interesting if that does fix it. > > Cameron. > > On 21-Dec-2016 04:31, Alberto Sánchez wrote: > > Thanks you very much both, > > > > Andrew, > > > > This is the data in the database > > > > > > RainRate Rain > > 1482207600 0.0048387097 0 > > 1482207900 0.0499999999 0 > > 1482208200 0.0499999999 0 > > 1482208500 0.0478787878 0 > > 1482208800 0.0091428571 0 > > > > > > I have also seen what you comment on wunderground. I do not know what > > may be due, I'll check weewx.conf > > > > mwall, > > > > In the rain counter of the console appeared "HHH mm". I just reset and > > has been zeroed. > > > > El martes, 20 de diciembre de 2016, 14:33:04 (UTC+1), mwall escribió: > > > > On Tuesday, December 20, 2016 at 1:35:14 AM UTC-5, Alberto Sánchez > > wrote: > > > > Hi mwall, > > > > It has rained tonight. The console has registered the rain and > > weewx has recorded the rain rate well but has not > calculated the > > total rain. Example: Today's Rain 0.0 mm > > High Rain Rate 1.3 mm / hr at 05:19:22 AM > > > > Weewx 3.6.1 > > Driver 0,15RC3 > > > > > > alberto, > > > > when was the last time you reset the rain counter? you can get > this > > information from the wmr300 console. > > > > m > > > > -- > > You received this message because you are subscribed to a topic in the > > Google Groups "weewx-user" group. > > To unsubscribe from this topic, visit > > > https://groups.google.com/d/topic/weewx-user/YSz_IWnzOjE/unsubscribe > <https://groups.google.com/d/topic/weewx-user/YSz_IWnzOjE/unsubscribe>. > > To unsubscribe from this group and all its topics, send an email to > > [email protected] > <mailto:weewx-user%[email protected]> > > <mailto:[email protected] > <mailto:weewx-user%[email protected]>>. > > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. > > -- > You received this message because you are subscribed to a topic in > the Google Groups "weewx-user" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/weewx-user/YSz_IWnzOjE/unsubscribe > <https://groups.google.com/d/topic/weewx-user/YSz_IWnzOjE/unsubscribe>. > To unsubscribe from this group and all its topics, send an email to > [email protected] > <mailto:weewx-user%[email protected]>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. > > -- > You received this message because you are subscribed to a topic in the > Google Groups "weewx-user" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/weewx-user/YSz_IWnzOjE/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected] > <mailto:[email protected]>. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
