Cameron, I installed 3.6.2 today on Ubuntu (old HP laptop) attached to a WMR300a. I am having the same problem described in this thread: no data from the console. I installed using apt-get which gave me version 0.13 of the driver. After reading this thread, I went to github and got 0.16rc2. Should I use version in this zip file? It says something about WMR300C. Does that matter?
On Friday, November 25, 2016 at 7:37:37 AM UTC-7, Cameron D wrote: > > I now have a version that is working reliably across a few restarts. > I need to do a lot of tidying up of debug code, test it using usblib0 and > clean up a few mysteries such as why it is suddenly in US units. > > This will not happen for a few days due to other commitments. If anybody > wants to try this interim code they are welcome to try the attached... > > Essentially I think the problem, as I guessed in the devel list posting, > is that the console is non-deterministic in its i/o stream and eventually > gets tied up if single-thread blocking i/o calls are used. > > The solution mainly involved looking again at Zahlii's code and, because > the wmr300 would not listed to me, I would not talk to it. > It is quite happy to send data without a single ACK response, so long as > the heartbeat occurs every so often. > > The history reread might still have some gaps in it. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
