OK, as requested. Here's the log from startup, followed by my conf file (scrubbed).
May 23 17:10:03 wx weewx[1562]: engine: Initializing weewx version 3.6.2 May 23 17:10:03 wx weewx[1562]: engine: Using Python 2.7.9 (default, Sep 17 2016, 20:26:04) #012[GCC 4.9.2] May 23 17:10:03 wx weewx[1562]: engine: Platform Linux-4.4.38-v7+-armv7l-with-debian-8.0 May 23 17:10:03 wx weewx[1562]: engine: pid file is /var/run/weewx.pid May 23 17:10:03 wx weewx[1566]: engine: Using configuration file /etc/weewx/weewx.conf May 23 17:10:03 wx weewx[1566]: engine: Initializing engine May 23 17:10:03 wx weewx[1566]: engine: Loading station type Vantage (weewx.drivers.vantage) May 23 17:10:03 wx weewx[1551]: Starting weewx weather system: weewx. May 23 17:10:03 wx weewx[1566]: vantage: driver version is 3.0.9 May 23 17:10:04 wx weewx[1566]: vantage: Opened up serial port /dev/ttyUSB0; baud 19200; timeout 4.00 May 23 17:10:04 wx weewx[1566]: vantage: gentle wake up of console successful May 23 17:10:04 wx weewx[1566]: vantage: _setup; hardware type is 16 May 23 17:10:04 wx weewx[1566]: engine: Loading service weewx.engine.StdTimeSynch May 23 17:10:04 wx weewx[1566]: engine: Finished loading service weewx.engine.StdTimeSynch May 23 17:10:04 wx weewx[1566]: engine: Loading service weewx.engine.StdConvert May 23 17:10:04 wx weewx[1566]: engine: StdConvert target unit is 0x1 May 23 17:10:04 wx weewx[1566]: engine: Finished loading service weewx.engine.StdConvert May 23 17:10:04 wx weewx[1566]: engine: Loading service weewx.engine.StdCalibrate May 23 17:10:04 wx weewx[1566]: engine: Finished loading service weewx.engine.StdCalibrate May 23 17:10:04 wx weewx[1566]: engine: Loading service weewx.engine.StdQC May 23 17:10:04 wx weewx[1566]: engine: Finished loading service weewx.engine.StdQC May 23 17:10:04 wx weewx[1566]: engine: Loading service weewx.wxservices.StdWXCalculate May 23 17:10:04 wx weewx[1566]: wxcalculate: The following values will be calculated: barometer=prefer_hardware, windchill=prefer_hardware, dewpoint=prefer_hardware, appTemp=prefer_hardware, rainRate=prefer_hardware, windrun=prefer_hardware, heatindex=prefer_hardware, maxSolarRad=prefer_hardware, humidex=prefer_hardware, pressure=prefer_hardware, inDewpoint=prefer_hardware, ET=prefer_hardware, altimeter=prefer_hardware, cloudbase=prefer_hardware May 23 17:10:04 wx weewx[1566]: wxcalculate: The following algorithms will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS May 23 17:10:04 wx weewx[1566]: engine: Finished loading service weewx.wxservices.StdWXCalculate May 23 17:10:04 wx weewx[1566]: engine: Loading service weewx.engine.StdArchive May 23 17:10:04 wx weewx[1566]: engine: Archive will use data binding wx_binding May 23 17:10:04 wx weewx[1566]: engine: Record generation will be attempted in 'hardware' May 23 17:10:04 wx weewx[1566]: engine: Using archive interval of 300 seconds (specified by hardware) May 23 17:10:04 wx weewx[1566]: engine: Use LOOP data in hi/low calculations: 1 May 23 17:10:04 wx weewx[1566]: engine: Using binding 'wx_binding' to database 'weewx.sdb' May 23 17:10:04 wx weewx[1566]: manager: Starting backfill of daily summaries May 23 17:10:04 wx weewx[1566]: manager: Daily summaries up to date May 23 17:10:04 wx weewx[1566]: engine: Finished loading service weewx.engine.StdArchive May 23 17:10:04 wx weewx[1566]: engine: Loading service weewx.restx.StdStationRegistry May 23 17:10:04 wx weewx[1566]: restx: StationRegistry: Station will not be registered: no station_url specified. May 23 17:10:04 wx weewx[1566]: engine: Finished loading service weewx.restx.StdStationRegistry May 23 17:10:04 wx weewx[1566]: engine: Loading service weewx.restx.StdWunderground May 23 17:10:04 wx weewx[1566]: restx: Wunderground-RF: Data for station KNJWESTC2 will be posted May 23 17:10:04 wx weewx[1566]: engine: Finished loading service weewx.restx.StdWunderground May 23 17:10:04 wx weewx[1566]: engine: Loading service weewx.restx.StdPWSweather May 23 17:10:04 wx weewx[1566]: restx: PWSWeather: Data for station w2irt will be posted May 23 17:10:04 wx weewx[1566]: engine: Finished loading service weewx.restx.StdPWSweather May 23 17:10:04 wx weewx[1566]: engine: Loading service weewx.restx.StdCWOP May 23 17:10:04 wx weewx[1566]: restx: CWOP: Data for station W2IRT will be posted May 23 17:10:04 wx weewx[1566]: engine: Finished loading service weewx.restx.StdCWOP May 23 17:10:04 wx weewx[1566]: engine: Loading service weewx.restx.StdWOW May 23 17:10:04 wx weewx[1566]: restx: WOW: Posting not enabled. May 23 17:10:04 wx weewx[1566]: engine: Finished loading service weewx.restx.StdWOW May 23 17:10:04 wx weewx[1566]: engine: Loading service weewx.restx.StdAWEKAS May 23 17:10:04 wx weewx[1566]: restx: AWEKAS: Posting not enabled. May 23 17:10:04 wx weewx[1566]: engine: Finished loading service weewx.restx.StdAWEKAS May 23 17:10:04 wx weewx[1566]: engine: Loading service user.twitter.Twitter May 23 17:10:05 wx weewx[1566]: restx: Shut down CWOP thread. May 23 17:10:05 wx weewx[1566]: restx: Shut down PWSWeather thread. May 23 17:10:05 wx weewx[1566]: restx: Shut down Wunderground-RF thread. May 23 17:10:05 wx weewx[1566]: engine: Caught unrecoverable exception in engine: May 23 17:10:05 wx weewx[1566]: **** No module named requests_oauthlib May 23 17:10:05 wx weewx[1566]: **** Traceback (most recent call last): May 23 17:10:05 wx weewx[1566]: **** File "/usr/share/weewx/weewx/engine.py", line 841, in main May 23 17:10:05 wx weewx[1566]: **** engine = engine_class(config_dict) May 23 17:10:05 wx weewx[1566]: **** File "/usr/share/weewx/weewx/engine.py", line 76, in __init__ May 23 17:10:05 wx weewx[1566]: **** self.loadServices(config_dict) May 23 17:10:05 wx weewx[1566]: **** File "/usr/share/weewx/weewx/engine.py", line 140, in loadServices May 23 17:10:05 wx weewx[1566]: **** self.service_obj.append(weeutil.weeutil._get_object(svc)(self, config_dict)) May 23 17:10:05 wx weewx[1566]: **** File "/usr/share/weewx/weeutil/weeutil.py", line 1015, in _get_object May 23 17:10:05 wx weewx[1566]: **** mod = __import__(module) May 23 17:10:05 wx weewx[1566]: **** File "/usr/share/weewx/user/twitter.py", line 85, in <module> May 23 17:10:05 wx weewx[1566]: **** from twython import Twython, TwythonError, TwythonAuthError, TwythonRateLimitError May 23 17:10:05 wx weewx[1566]: **** File "/usr/lib/python2.7/dist-packages/twython/__init__.py", line 23, in <module> May 23 17:10:05 wx weewx[1566]: **** from .api import Twython May 23 17:10:05 wx weewx[1566]: **** File "/usr/lib/python2.7/dist-packages/twython/api.py", line 14, in <module> May 23 17:10:05 wx weewx[1566]: **** from requests_oauthlib import OAuth1, OAuth2 May 23 17:10:05 wx weewx[1566]: **** ImportError: No module named requests_oauthlib May 23 17:10:05 wx weewx[1566]: **** Exiting. CONF FILE: # WEEWX CONFIGURATION FILE # # Copyright (c) 2009-2015 Tom Keffer <[email protected]> # See the file LICENSE.txt for your rights. ############################################################################## # This section is for general configuration information. # Set to 1 for extra debug info, otherwise comment it out or set to zero debug = 1 # Root directory of the weewx data file hierarchy for this station WEEWX_ROOT = / # How long to wait before timing out a socket (FTP, HTTP) connection socket_timeout = 20 # Do not modify this. It is used when installing and updating weewx. version = 3.6.2 ############################################################################## # This section is for information about the station. [Station] # Description of the station location location = "West Caldwell, NJ" # Latitude and longitude in decimal degrees latitude = 40.8615 longitude = -74.2775 # Altitude of the station, with unit it is in. This is downloaded from # from the station if the hardware supports it. altitude = 261, foot # Set to type of station hardware. There must be a corresponding stanza # in this file with a 'driver' parameter indicating the driver to be used. station_type = Vantage # If you have a website, you may specify an URL #station_url = http://www.example.com # The start of the rain year (1=January; 10=October, etc.). This is # downloaded from the station if the hardware supports it. rain_year_start = 1 # Start of week (0=Monday, 6=Sunday) week_start = 6 ############################################################################## [Vantage] type = serial port = /dev/ttyUSB0 driver = weewx.drivers.vantage # The time (in seconds) between LOOP packets. loop_interval = 2.5 ############################################################################## # This section is for uploading data to Internet sites [StdRESTful] [[StationRegistry]] # To register this weather station with weewx, set this to true register_this_station = true [[AWEKAS]] # This section is for configuring posts to AWEKAS. # If you wish to do this, set the option 'enable' to true, # and specify a username and password. enable = false username = replace_me password = replace_me [[CWOP]] # This section is for configuring posts to CWOP. # If you wish to do this, set the option 'enable' to true, # and specify the station ID (e.g., CW1234). enable = true station = W2IRT post_interval = 300 log_success = True log_failure = True server_list = rotate.aprs.net:14580, rotate.aprs2.net:14580, cwop.aprs.net:14580, swop.aprs.net:23 # If this is an APRS (radio amateur) station, uncomment # the following and replace with a passcode (e.g., 12345). passcode [[PWSweather]] # This section is for configuring posts to PWSweather.com. # If you wish to do this, set the option 'enable' to true, # and specify a station and password. enable = true station = w2irt password [[WOW]] # This section is for configuring posts to WOW. # If you wish to do this, set the option 'enable' to true, # and specify a station and password. enable = false station = replace_me password = replace_me [[Wunderground]] # This section is for configuring posts to the Weather Underground. # If you wish to do this, set the option 'enable' to true, # and specify a station (e.g., 'KORHOODR3') and password. enable = true station = password # Set the following to True to have weewx use the WU "Rapidfire" # protocol. Not all hardware can support it. See the User's Guide. rapidfire = True [[Twitter]] oauth_token_secret = OAUTH_TOKEN_SECRET oauth_token = OAUTH_TOKEN app_key_secret = APP_KEY_SECRET app_key = APP_KEY ############################################################################## # This section specifies what reports, using which skins, to generate. [StdReport] # Where the skins reside, relative to WEEWX_ROOT SKIN_ROOT = /etc/weewx/skins # Where the generated reports should go, relative to WEEWX_ROOT HTML_ROOT = /var/www/html/weewx # The database binding indicates which data should be used in reports. data_binding = wx_binding # Each of the following subsections defines a report that will be run. [[StandardReport]] # See the customizing guide to change the units, plot types and line # colors, modify the fonts, display additional sensor data, and other # customizations. Many of those changes can be made here by overriding # parameters, or by modifying templates within the skin itself. # The StandardReport uses the 'Standard' skin, which contains the # images, templates and plots for the report. skin = Standard [[[Units]]] [[[[Groups]]]] group_altitude = foot group_speed2 = mile_per_hour2 group_pressure = inHg group_rain = inch group_rainrate = inch_per_hour group_temperature = degree_F group_degree_day = degree_F_day group_speed = mile_per_hour [[FTP]] # FTP'ing the results to a webserver is treated as just another report, # albeit one with an unusual report generator! skin = Ftp # If you wish to use FTP, uncomment and fill out the next four lines. #user = replace with the ftp username #password = replace with the ftp password #server = replace with the ftp server name, e.g, www.threefools.org #path = replace with the ftp destination directory (e.g., /weather) # Set to True for an FTP over TLS (FTPS) connection. Not all servers # support this. secure_ftp = False # To upload files from something other than what HTML_ROOT is set # to above, specify a different HTML_ROOT here. #HTML_ROOT = /var/www/html/weewx # Most FTP servers use port 21 port = 21 # Set to 1 to use passive mode, zero for active mode passive = 1 [[RSYNC]] # rsync'ing to a webserver is treated as just another report skin = Rsync # If you wish to use rsync, you must configure passwordless ssh using # public/private key authentication from the user account that weewx # runs as to the user account on the remote machine where the files # will be copied. # # The following three lines determine where files will be sent. #server = replace with the rsync server name, e.g, www.threefools.org #path = replace with the rsync destination directory (e.g., /weather) #user = replace with the rsync username # Rsync can be configured to remove files from the remote server if # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you # make a mistake in the remote path, you could could unintentionally # cause unrelated files to be deleted. Set to 1 to enable remote file # deletion, zero to allow files to accumulate remotely. delete = 0 ############################################################################## # This service acts as a filter, converting the unit system coming from # the hardware to a unit system in the database. [StdConvert] # The target_unit affects only the unit system in the database. Once # chosen it cannot be changed without converting the entire database. # Modification of target_unit after starting weewx will result in # corrupt data - the database will contain a mix of US and METRIC data. # # The value of target_unit does not affect the unit system for # reporting - reports can display US, Metric, or any combination of units. # # In most cases, target_unit should be left as the default: US # # In particular, those migrating from a standard wview installation # should use US since that is what the wview database contains. # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' ############################################################################## # This section can adjust data using calibration expressions. [StdCalibrate] [[Corrections]] # For each type, an arbitrary calibration expression can be given. # It should be in the units defined in the StdConvert section. # Example: foo = foo + 0.2 ############################################################################## # This section is for quality control checks. If units are not specified, # values must be in the units defined in the StdConvert section. [StdQC] [[MinMax]] barometer = 26, 32.5, inHg outTemp = -40, 120, degree_F inTemp = 10, 120, degree_F outHumidity = 0, 100 inHumidity = 0, 100 windSpeed = 0, 120, mile_per_hour pressure = 24, 34.5, inHg ############################################################################## # This section controls the origin of derived values. [StdWXCalculate] [[Calculations]] # Derived quantities are calculated by this service. Possible values are: # hardware - use the value provided by hardware # software - use the value calculated by weewx # prefer_hardware - use value provide by hardware if available, # otherwise use value calculated by weewx pressure = prefer_hardware barometer = prefer_hardware altimeter = prefer_hardware windchill = prefer_hardware heatindex = prefer_hardware dewpoint = prefer_hardware inDewpoint = prefer_hardware rainRate = prefer_hardware ############################################################################## # For hardware that supports it, this section controls how often the # onboard clock gets updated. [StdTimeSynch] # How often to check the weather station clock for drift (in seconds) clock_check = 14400 # How much it can drift before we will correct it (in seconds) max_drift = 5 ############################################################################## # This section is for configuring the archive service. [StdArchive] # If the station hardware supports data logging then the archive interval # will be downloaded from the station. Otherwise, specify it (in seconds). archive_interval = 300 # If possible, new archive records are downloaded from the station # hardware. If the hardware does not support this, then new archive # records will be generated in software. # Set the following to "software" to force software record generation. record_generation = hardware # Whether to include LOOP data in hi/low statistics loop_hilo = True # The data binding used to save archive records data_binding = wx_binding ############################################################################## # This section binds a data store to a database. [DataBindings] [[wx_binding]] # The database must match one of the sections in [Databases]. # This is likely to be the only option you would want to change. database = archive_sqlite # The name of the table within the database table_name = archive # The manager handles aggregation of data for historical summaries manager = weewx.wxmanager.WXDaySummaryManager # The schema defines the structure of the database. # It is *only* used when the database is created. schema = schemas.wview.schema ############################################################################## # This section defines various databases. [Databases] # A SQLite database is simply a single file [[archive_sqlite]] database_type = SQLite database_name = weewx.sdb # MySQL [[archive_mysql]] database_type = MySQL database_name = weewx ############################################################################## # This section defines defaults for the different types of databases. [DatabaseTypes] # Defaults for SQLite databases [[SQLite]] driver = weedb.sqlite # Directory in which the database files are located SQLITE_ROOT = /var/lib/weewx # Defaults for MySQL databases [[MySQL]] driver = weedb.mysql # The host where the database is located host = localhost # The user name for logging in to the host user = weewx # The password for the user name password = weewx ############################################################################## # This section configures the internal weewx engine. [Engine] [[Services]] # This section specifies the services that should be run. They are # grouped by type, and the order of services within each group # determines the order in which the services will be run. prep_services = weewx.engine.StdTimeSynch data_services = , process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate archive_services = weewx.engine.StdArchive restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS, user.twitter.Twitter report_services = weewx.engine.StdPrint, weewx.engine.StdReport On Monday, May 22, 2017 at 2:47:54 PM UTC-4, Peter Dougherty wrote: > > Weewx has developed a problem as described below. > > I'm running it on a Raspberry Pi. It ran fine for 98 days and then stopped > cold. I pulled and restored power and can remote into the box using a VNC > client. The box is on the network, I can ping everything from it and I have > restarted weewx a dozen times using /etc/init.d/weewx restart. It appears > to be fine, but nothing is going out to Weather Underground, CWOP or > anybody else. The last update on the localhost interface was at 1pm today, > but the last update to WU and CWOP was on May 17th. The weather station is > a Davis Vantage Pro 2 using the USB dongle. I'm pretty sure it's sending > data from the logger to weewx but have no way or no understanding on how to > test communication with the Davis. According to the logs, it's functioning. > I have a huge log and I'm not sure how to post it, or how much of it I > should include here. > > I am an new user and extremely unfamiliar with Linux. The box was set up > by a friend and I myself am below kindergarten-level understanding of how > to fix it. I can follow a script but I have no natural sense of how to > proceed without being told explicitly. Any assistance tremendously > appreciated. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
