OK I did that now. I set to lux, fc and w/m2 And on weewx always show the same value as lux, no matter what I set on console, only on console show the right value. So it looks like that concole sending data in lux.
here is log http://zerobin.povej.net/?c992731dbbf1f6e0#d0gfEKCk6NTgqwX8Zp7xqQqDNLtLcGgiaeKSGKaD/gU= Dne ponedeljek, 18. september 2017 14.18.09 UTC+2 je oseba mwall napisala: > > > > On Monday, September 18, 2017 at 4:50:34 AM UTC-4, Damjan Hajsek wrote: >> >> I use now ambientweather firmware 2.4.4 >> https://ambientweather.wikispaces.com/ws1002-wifi >> >> I tried to find logs but can't, debug = 1 but can't find log file with >> raw data on my centos 7. >> >> I have setup weewx to use mysql database. >> On settings on console I can select, lux or w/m2 >> > > when you change the console settings, does that change the scaling of the > values that the station emits? > > i suspect it does not, but it would be nice to know empirically. > > do this: > > 1) set the console to display w/m^2 > > 2) run weewx directly > > sudo weewxd /etc/weewx/weewx.conf > > 3) capture a few of the resulting LOOP packets > > 4) stop weewx with ctrl-c > > 5) change the console to display lux > > 6) run weewx directly > > 7) capture a few of the resulting LOOP packets > > 8) post the two sets of LOOP packets, and identify which resulted from lux > and which resulted from w/m^2 > > m > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
