On Tuesday, September 19, 2017 at 4:10:08 AM UTC-4, Damjan Hajsek wrote: > > I have updatetd now again and Solar Radiation show about 35% more than it > is real, but rain Rate is now 0. > Also have noticed that preassure shows on weewx about 0002 less than it > is, when it is 1010mbar on console in weewx shows 1008mbar > >> use StdCalibrate to adjust solar radiation. as i said before, the conversion from lux to W/m^2 is an approximation. if you want the weewx output to match that of the console, you will have to figure out what algorithm the console firmware uses, then put that into StdCalibrate.
regarding pressure, are you comparing apples to apples? is the console reporting gauge pressure or sea level pressure? what is the station altitude? 'rain Rate is now 0' is not helpful. is it always 0? what *should* it be? is there always a discrepancy, or just for certain values of rain? are you using software or hardware for rain rate? what is the raw output from the station when rain rate in weewx is not the same as rain rate on the console? m -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
