Thanks, Doug

Could you put your comments in the Wiki? That way it will be easier for
someone to find, rather than search through the nearly 5,000 topics in
weewx-user.

Perhaps something in the hardware
<https://github.com/weewx/weewx/wiki#hardware> section?

-tk

On Tue, Dec 26, 2017 at 7:53 PM, Doug Bo <[email protected]> wrote:

> I'm running an older Vantage Pro2 console, vintage 2007, firmware 1.90
> (can't update firmware due to console hardware changes)
> My WeatherlinkIP is running current firmware but console seems to be very
> slow to respond.  I disabled the upload to weatherlink.
>
> I had to tweak the conf file to get it to run more than 24 hours.  The
> parameter adjustments below are based on threads I found in this forum.
> Hopefully my discoveries will help someone.  Although I doubt anyone (other
> than me) is running old consoles.  LOL
>
> Any other tips are appreciated.  Thanks.
>
> I'm currently discussing my options with Davis on updating my consoles.
> Maybe newer hardware.  :)
>
> Doug B.
>
> ========================================================
>
> loop_on_init = True
>
>
>     # TCP send delay (when using the WeatherLinkIP):
>     tcp_send_delay = 0.5
>
>
>
> *    # experiment    command_delay = 1.0*
>     # The id of your ISS station (usually 1). If you use a wind meter
> connected
>     # to a anemometer transmitter kit, use its id
>     iss_id = 2
>
>     # How long to wait for a response from the station before giving up (in
>     # seconds; must be greater than 2)
>     # timeout = 4
>
> *    timeout = 8*
>     # How long to wait before trying again (in seconds)
>     # wait_before_retry = 1.2
>
> *    wait_before_retry = 3.5*
>     # How many times to try before giving up:
>     max_tries = 4
>
>     # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2
>     model_type = 2
>
>     # The driver to use:
>     driver = weewx.drivers.vantage
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to