Most of it looks pretty good. Not bad for my first skin attempt :) I knew imperial to metric would be an issue, and I had tried my best to plan for it. I didn't take timezones into consideration with my testing though - for example noticed on your test site that the forecast row has wrong borders and it's showing the weather for yesterday (for your timezone). I'll take a look into that.
I see my error with the records page conversion, so I'll have to issue an update on that one later today. For DarkSky, I'll have to add the "units" flag. They have 6 different unit types, so I'll have to update the setup guide too. Can't believe I missed that one! I'll let you all know when I issue an update. Possibly late today (US Eastern time) On Wednesday, August 22, 2018 at 12:30:47 AM UTC-4, Colin Larsen wrote: > > Arrgh, typo - www.41south.net.nz > > Also found this on the records page, note the change from metric back to > US units > > Highest Temperature 21.1 °C August 19, 2018 at 9:56 AM August 19, 2018 at > 9:56 AM 21.1 °C > Lowest Temperature -1.1 °C August 18, 2018 at 4:58 PM August 18, 2018 at > 4:58 PM -1.1 °C > Highest Heat Index 21.1 °C August 19, 2018 at 9:56 AM August 19, 2018 at > 9:56 AM 21.1 °C > Lowest Wind Chill 21.1 °C August 19, 2018 at 9:56 AM August 19, 2018 at > 9:56 AM August 19, 2018 at 9:56 AM > Largest Daily Temperature Range 40.0 °F August 19, 2018 > (Min: 30.0°F - Max: 70.0°F ) August 19, 2018 > (Min: 30.0°F - Max: 70.0°F ) 40.0 °F > Smallest Daily Temperature Range 5.9 °F August 18, 2018 > (Min: 30.0°F - Max: 35.9°F ) August 18, 2018 > (Min: 30.0°F - Max: 35.9°F ) 5.9 °F > > On Wed, Aug 22, 2018 at 3:54 PM Colin Larsen <[email protected] > <javascript:>> wrote: > >> www.41south.net nz >> >> On Wed, Aug 22, 2018 at 3:54 PM Colin Larsen <[email protected] >> <javascript:>> wrote: >> >>> Ok working in test :) >>> >>> Couple of minor things with the Darksky forecast; >>> >>> I need to set the units to metric with kph wind - ?units=ca at the end >>> of the query string, is there a place to do that? >>> >>> There doesn't appear to be a "windy" icon >>> >>> Otherwise so far so good. I haven't delved into mqtt just yet. >>> >>> Cheers >>> Colin >>> >>> On Wed, Aug 22, 2018 at 1:11 PM Pat <[email protected] <javascript:>> >>> wrote: >>> >>>> Not sure. It might be. Worth a try and see how it goes? >>>> >>>> On Tuesday, August 21, 2018 at 7:50:34 PM UTC-4, Colin Larsen wrote: >>>>> >>>>> CloudMQTT with 5 connections and 10Kbit/sec might not be enough then? >>>>> I'll definitely look at setting up my own I think. Might even just whack >>>>> it >>>>> on a Pi zero or something to play with >>>>> >>>>> On Wed, Aug 22, 2018 at 11:26 AM Pat <[email protected]> wrote: >>>>> >>>>>> Sorry, meant to update that to say overlay=clouds if you wanted >>>>>> clouds. >>>>>> >>>>>> On Tuesday, August 21, 2018 at 7:24:19 PM UTC-4, Pat wrote: >>>>>>> >>>>>>> MQTT can be the tricky bit because some of the freebies out there >>>>>>> have limitations which your weewx may hit pretty quickly. If you're >>>>>>> thinking of trying to host your own MQTT, I'm working on a write up for >>>>>>> how >>>>>>> mine is setup. >>>>>>> >>>>>>> I chose windy.com because it's free and you can do a fair amount of >>>>>>> customization. Except for the map color - gray is the only option... >>>>>>> Looks >>>>>>> like you can only have wind, or cloud. The cloud option looks like it >>>>>>> may >>>>>>> show both actually. >>>>>>> >>>>>>> Change the lat/lon for your area, but the bit I changed (and got >>>>>>> lucky with) was overlay=wind >>>>>>> >>>>>>> >>>>>>> https://embed.windy.com/embed2.html?lat=-26.195&lon=138.560&zoom=5&level=surface&overlay=wind&menu=&message=&marker=&calendar=&pressure=&type=map&location=coordinates&detail=&detailLat=-26.195&detailLon=138.560&metricWind=default&metricTemp=default&radarRange=-1 >>>>>>> >>>>>>> You're not married to windy though, if you find another radar you >>>>>>> like, you can use that instead. Just use the full HTML of <img src=" >>>>>>> http://thesite/radar.gif";> or something and making sure the width >>>>>>> and height matches the parameters for an easy swap out. >>>>>>> >>>>>>> >>>>>>> On Tuesday, August 21, 2018 at 6:32:42 PM UTC-4, Colin Larsen wrote: >>>>>>>> >>>>>>>> I'm down in New Zealand so a few hours out with you. Just created >>>>>>>> my Darksky account and reading about MQTT - so much to learn! >>>>>>>> Hopefully in >>>>>>>> the next few hours but will post my success (or otherwise). >>>>>>>> >>>>>>>> Thanks again - really looking forward to getting this up and >>>>>>>> running. >>>>>>>> >>>>>>>> 1st question, can Windy.com be set to display wind/cloud rather >>>>>>>> than the radar image? We don't get that down here in NZ yet >>>>>>>> >>>>>>>> On Wednesday, 22 August 2018 10:27:40 UTC+12, Pat wrote: >>>>>>>>> >>>>>>>>> Thanks! Have you got the skin setup? >>>>>>>> >>>>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "weewx-user" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected] <javascript:>. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
![http://thesite/radar.gif"](http://thesite/radar.gif"){kind=link}